A lighting control console (also called a lightboard, lighting board, or lighting desk) is an electronic device used in theatrical lighting design to control multiple stage lights at once.Lighting consoles communicate with the dimmers and other devices in the lighting system via an electronic control protocol.
What does a lighting console programmer do?
Lighting console operators cue and control the lighting on a TV programme. They normally work on big studio shows that use lots of different lights and are in charge of selecting which lights are used and when.
What is DMX light controller?
DMX is a lighting control protocol which allows users to have ultimate control over their lighting needs.It lets the technician be flexible and create dynamic lighting sequences that will impress all that are watching.
What are faders on a light board?
Faders: A slider on the console that is used to fade a dimmer, fixture, or group of fixtures depending on how your console is set up.
What is the first step in working with a light board?
You select your lights or groups of lights, apply attributes in the programmer, hit record, and select a recording destination. Then you are free to clear out your programmer (if you’d like), and play back your recorded cue.
What are par cans used for?
PAR Cans are the most widely used light for concerts, clubs, and theatrical lighting. PAR cans come in a wide variety of sizes and shapes; from the minuscule PAR16 to the 1000 watt PAR64 cans.
How much does a lighting programmer make?
While ZipRecruiter is seeing annual salaries as high as $113,500 and as low as $20,000, the majority of Lighting Programmer salaries currently range between $31,000 (25th percentile) to $79,000 (75th percentile) with top earners (90th percentile) making $94,000 annually across the United States.
What does a lighting designer?
A Lighting Designer will work with the Director, Artistic Director and/or Lighting Technicians to create the visuals for lighting, lasers, strobes, spots and sometimes video screens for a performance.
What is a channel in lighting?
Channel: A control path that allows the console to vary the output level of one or more dimmers or other devices.Dimmer: A device which regulates light intensity. Most dimmers do this by electronically controlling the electricity transmitted to the lamp.
What is DMX daisy chain?
The daisy chain is a simple wiring method where you wire each fixture looping out of the previous fixture to create a line of fixtures connected back to the console. Example: Let’s say you have 4 LED Fixtures. Most fixtures will have a DMX input and a DMX output.
Is 3 pin DMX same as XLR?
Though DMX cables and XLR cables are often both three-pin cables and look the same, they should not be used interchangeably, especially along longer cable runs. DMX cables and XLR cables are engineered to handle different types of information at different impedance.
What is a lighting universe?
A DMX line is limited to a total of 512 channels, which is also called a universe. Each lighting fixture you have uses a number of DMX channels depending on how many parameters the fixture has. Lights can also have multiple personalities, or profiles, depending on how much or how little control you want.
What does a submaster do on a lighting board?
The SubMasters can control different groups of lighting channels while the Grand Master adjusts the intensity of every channels as it leaves the lighting desk.
What is a dimmer board?
The Dimmer Board Operator is responsible for setting up the lighting console, which controls the lighting on set. Then, he or she must trigger every lighting cue for a performance or scene.
What is light mixer?
Lets you interactively edit USD properties for multiple lights.
How much does a light board cost?
While there are premade lightboards available for purchase, the lightboard we present can be built from a few basic supplies. Professional-grade lightboards are available for $3000-$15,000.
How do you set up a light board?
Lightboard:
- Drill a hole near the corner of one of the timber lengths to feed the wire for the LED lights.
- Lay the LED light strip in the channel and adhere with the adhesive backing.
- Glue and screw 3 sides of the frame together.
- Run the LED leads down one side of the frame and out the hole. (
How many PAR lights do I need?
How much PAR light do I need for my grow area? To optimise your grow it is recommended that your plants receive 500-1000 µmols of PAR light for every m? (PPFD). Less than this and growth rates will be low.
What does PAR mean in light bulbs?
parabolic aluminized reflector
PAR stands for parabolic aluminized reflector. These bulbs have a lamp, reflector, and pressed lens inside the lamp to provide directional lighting. They have a shorter body than BR light bulbs with a bowl shape. PAR light bulbs have soft light, but with a more defined edge than BR bulbs.
What is a scoop light?
In stage lighting, an ellipsoidal reflector floodlight (sometimes known by the acronym ERF which is often pronounced “erf”), better known as a scoop, is a large, simple lighting fixture with a dome-like reflector, large high-wattage lamp and no lens.
What qualifications do I need to be a lighting technician?
You’ll need to have:
- technical knowledge and lighting skills.
- manual dexterity and a good level of physical fitness.
- the ability to work well under pressure and to deadlines.
- time management and organisational skills.
- the ability to work as part of a team.
- effective communication skills.
- attention to detail.
- creative flair.
Contents