High Grade Levers, Built to a Higher Standard If you are going to be using the door to carry things in or out with your hands full for example, a leverset will allow you to open the door without having to use a hand to turn a knob.
What is a Leverset door handle?
Lever Set Door Handles / Pull Handles
Lever Set Door Handles come in Dummy, Passage, Privacy or Keyed. Lever Door handles are where you push down on the lever to open the door. Entrance Pull Handles come back to back and usually a long bar handles.
How does a communicating lock work?
Communicating Lock function is defined as a lock where the dead locking latch bolt is operated by the lever from either side. The turn button or locking device on either side locks or unlocks opposite lever.The dead bolt is retracted by key from the outside and by the turn from the inside.
How does a privacy lock work?
The privacy lock has a button or tab that people can push in order to lock the door once they are inside the room with the door closed. When the door handle is turned from the inside, the door unlocks automatically.However, the lock does ensure that people do not accidentally open the door while someone is inside.
What does non turning lock mean?
Non-turning door hardware is sometimes referred to as dummy or inactive hardware. These knobs and levers are meant to be used as decorative door pulls, often found on interior French doors or pantries.
What is a mortise deadlock?
Mortice deadlocks are the simplest. They only have a keyhole and a locking bolt that goes back and forth. A mortice sashlock, on the other hand, features a handle-operated latch mechanism. This means you can open and close the door without having to use the key, but can still lock the door when you leave the building.
What does door hardware include?
Parts of a door lock
- Trim: Sometimes called a rose, the trim is a decorative plate attached to the door under the knob or lever.
- Deadbolt:
- Escutcheon:
- Faceplate.
- Backplate:
- Latch bolt:
- Spindle:
- Strike plate:
What is a lock holdback?
By activating the Hold-back-Latch feature, the Danalock holds back the latch in your door.This feature must be activated if you don’t have a handle on the outside of your door.
What does storeroom lock mean?
Storeroom locks are used when the outside lever should be locked at all times. A key is used to retract the latchbolt and open the door; when the key is removed the door is locked on the outside. There is no means to lock/unlock the door from the inside.
What is a latch bolt?
Latch bolt An extremely common latch type, typically part of a lockset, it is a spring-loaded bolt with an angled edge. When the door is pushed closed, the angled edge of the latch bolt engages with the lip of the strike plate; a spring allows the bolt to retract.
What is the difference between a passage lock and a privacy lock?
PASSAGE SETS are used where doors do not need to lock. There is no key cylinder and no means to lock a passage set. PRIVACY SETS are often used for single-occupant restrooms or dressing rooms.Some privacy functions may also incorporate an indicator to show the locked/unlocked status of the door.
What is the difference between a bathroom lock and a privacy lock?
If you have a full bathroom mortice lock in the door, then you have a ‘bathroom’ handle.When this knob is turned the door is locked. If you have a ‘privacy’ handle then turning the knob will activate a mechanism in the handle which stops the lever part of the handle from moving.
Does privacy lock have key?
Privacy door knobs have a twist or button lock that works from only one side. Some privacy door knobs with button locks have a pin hole on the outside knob and a generic key that opens the lock.
Can bedroom doors have locks?
Yes, bedrooms should have locks if desired, but they should not be opened using a key for safety reasons.Though the primary question on whether or not bedrooms doors should have locks has been answered, there are many caveats involved such as lock types and which bedrooms should have locks (or not).
What is the difference between dummy and passage door knobs?
The main types of door functions are Passage (doors that don’t require locking), Privacy (a door that can be locked by a button on the inside), Dummy (has no mechanical latch and acts only as a pull), and Interior Mortise (door with an active latch with skeleton key lock).
How do you unlock a mortise lock?
A mortice lock is excruiatingly hard to open without a key.
- Insert the matching key into the mortice key hole.
- Turn the key counter-clockwise by one half to one full turn, depending on the model, to force the bolt to slide to the left from its locked position.
What does a mortise lock look like?
Mortise locks are assembled from many curiously odd-shaped, mechanical parts and enclosed inside a heavy-gauge steel case, punctured with circular and square holes that appear to represent a secret code. Mortise lock ‘bodies’ are mysteriously hidden inside a pocket, cut into the edge of the door.
What is a 5 point Mortice lock?
The five lever mortice deadlock is a type of door lock commonly fitted to wooden doors. It can be locked and unlocked with a key from both the inside and the outside. It works by inserting and turning the key to move the five levers into the correct position, allowing the bolt to be locked or unlocked.
What are door lock parts called?
cylinder
The main parts of a door lock are the cylinder, bolt, box and strike plate.
What is door tongue called?
Latch. The beveled “tongue” spring mechanism that extends from the edge of the door into the door jamb to hold the door shut when closed.
What is the hardware on a door called?
Most exterior doors are locked with a door knob, and also a deadbolt. The deadbolt bore hole is directly above the door knob hole. When a lever is turned, a solid steel cylinder is inserted deep into the door jamb to securely lock the door.The metal plates are attached to the door and door jamb with screws.
Contents