What Is A Good Gear Ratio For Topwater?

The Best Gear Ratio for Topwater Fishing is a 7:1 or Higher.

What gear ratio do I need for topwater?

Topwater: In most cases, topwater baits are lightweight and/or create slack in the line. This creates a need for a fast reel of 7.0:1 or higher to pick up the slack in the line to be ready for the hookset.

What action rod is best for topwater?

Dobyns Fury casting rod
The Dobyns Fury is the best rod for topwater walking baits. The ‘walking the dog’ technique involves retrieving the lure with your rod tip pointed down to the water, and imparting sideways darting motion to the lure by twitching the tip back and forth.

What gear ratio is best for buzzbaits?

Opt for a high-speed reel with at least a 7:1 retrieve ratio, though 8:1 might be better. The faster the retrieve speed, the easier it is to get the buzzbait’s blade turning, and the faster you can wind it in between casts.

What is the best gear ratio for bass fishing?

Reels with a gear ratio in the neighborhood of 6:1 are your workhorses. They get the bulk of the duty with most bass fishing applications, and in a pinch you could do the things best served by slower or faster reels by cranking slower or faster.

What is a 7.5 1 gear ratio good for?

7.5:1 Reel – With my 7.5:1 gear-ratio reel, I like to use this reel when I’m fishing single-hook lures like a buzzbait, a spinner bait, bladed jigs and a frog.

What is a 8.1 gear ratio good for?

High gear ratio reels | 7.1:1 thru 8.1:1
High gear ratios are best for techniques where taking up slack and bringing a bait back to the boat are critical. Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high-speed reel.

Can you fish topwater with a spinning rod?

You can fish topwater lures on both baitcasting and spinning tackle. Most experienced anglers rely on baitcasting tackle for the lion’s share of their topwater fishing. But spinning tackle will work fine as well. In fact, it may offer distinct advantages in windy conditions or when casting light lures.

What does extra fast mean on a fishing rod?

Extra-fast action rods deflect near the tip, and then taper very quickly to a stiffer mid and lower section. This design generally delivers maximum sensitivity, great casting accuracy, and the ability to make fast and powerful hook sets.

Is a spinnerbait topwater?

The overall primary difference is that buzzbaits are designed to be used only as a topwater lure during the warmer months while spinnerbaits can be used at varying levels in the water with different forms of retrieval, including topwater throughout the year.

How fast should I reel in a crankbait?

The correct speed of any crankbait reel is 21 inches of line pick-up per turn of the reel handle. Most of that information is on the internet or on the packaging. If it isn’t, measure what your reel is doing with a ruler. It’s that important.

What gear ratio is best for frog fishing?

The best gear ratio for frog fishing is 7.5:1 to 8.0:1. It’s important to get a reel with a high speed retrieve rate, since you need to pick up your slack as fast as possible when a bass grabs your lure, so you can set the hook. A high speed reel will help you to do this fast enough to set the hook effectively.

How do I choose the right gear ratio?

The conventional procedure for selecting gear ratios is to pick ratios that run the engine rpm to redline at the end of the medium and longest straights, and pick the lower gear ratios to minimize the rev drop at each shift. This method minimizes the number of shifts per lap.

What is a good gear ratio for flipping?

By today’s standards 9.1:1 is worth consideration and there are several new reels with ratios above 10:1. Good Luck and Good Fishing!

What is a good gear ratio for a baitcaster?

The most common reel on the market has a 6.4:1 gear ratio. This will allow you to work both fast moving presentations as well as slow. However, for certain techniques and applications, a very high or low gear ratio will often work best. For instance, burning a spinnerbait or buzzbait is best done with a 7.1:1 reel.

Are more ball bearings in a reel better?

When they’re considering purchasing a reel, anglers can’t help but notice how many bearings it offers. But the truth is that reels with lots of bearings aren’t necessarily better. The quality of the bearings, and the quality of the reel that contains them, are much more important than the number of bearings.

What gear ratio is best for lipless crankbaits?

to 6.1:1
Some prefer a slower gear ratio (in the 5.4:1 to 6.1:1 range) to keep the bait in the strike zone longer, while others prefer a higher gear ratio (7.3:1) for long casts that allows for a fast retrieve as soon as the bait hits the water.

What size spinning reel is best for bass fishing?

Why You Should Go With a 3000 Spinning Reel for Bass
A 3000-size spinning reel is a perfect size for bass, particularly if you are looking for good value for your money.

Is a higher gear ratio better for fishing?

Higher gear ratios tend to lead to more speed, but less power. This can mean reeling in heavy fish is difficult while smaller fish benefit more from the increased speed.

What gear ratio is best for jerkbaits?

High gear ratio reel | 7.1:1 thru 8.1:1
Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high speed reel. These techniques create a lot of slack in your line, and if you get bit 30 yards away from the boat, a high gear ratio comes in handy for getting a solid hookset.

What is a good spinnerbait rod?

A good spinnerbait rod should have a moderate taper with medium to medium-heavy action, so the relatively soft, responsive tip that will vibrate easily from the turning of the spinnerbait’s blade. This is critical to maintain contact with the bait.