Flush bolts are used most often on French doors, especially doors that lead to a kitchen, office, or living room. They are recessed into the door edge and slide upward or downward into the jamb either manually or automatically.
What are flush bolts used for?
Flush bolts are used to secure the inactive leaf of a pair of doors, projecting into the frame head and into a floor strike. In this application, the active leaf would typically have a lockset which latches into a strike mounted on the edge of the inactive leaf.
What is auto flush bolt?
Automatic Flush Bolts deploy rods automatically into the door frame header and floor, when the active leaf is closed. The rods prevent the inactive leaf from being opened. When the active leaf is opened, the flush bolt rods retract on the inactive leaf, allowing both doors to open.
How do you unlock a flush bolt?
The stationary panel locks and unlocks with flushbolts at the top and bottom of the panel. To disengage these flushbolts, find the black levers located on the strike plate and push the levers in, then up or down. There are small icons on the strike plate to denote the locked or unlocked position.
What is flush door?
Flush doors are simple door designs that have plain facings on both sides. They can be interior (more commonly) but also exterior.Solid flush doors are, by definition, heavier than the alternatives, but are usually a more suitable option when their function is to form a passage between two rooms.
How do you fit a flush bolt to a rebated door?
How to fit the flush bolt keep into the frame. Next, slot the flush bolt into the hole and be sure to pilot drill the holes before screwing it up. Finally, screw the door back on and close it. Flick the lever so the bolt goes up and mark around it on the floor or head of the door lining.
What is a surface bolt?
At Doorware.com we carry a large selection of door Surface Bolts and Flush Bolts.Unlike Flush Bolts, Surface Bolts are not mortised into the door. Instead, many are simply secured with screws to the door. Surface Bolts work by sliding the bolt into the strike; for this reason, they are also known as Slide Bolts.
What is dust proof socket?
Dust proof socket for use with flush bolts. A spring loaded plunger blocks the receiver hole when the locking bar is retracted preventing dust and debris entering. Picture shows the receiver hole blocked. This metal item has a satin chrome finish which is similar to aluminium.
What is a door coordinator?
A door coordinator helps to ensure that the correct door leaf closes first so the doors can close and latch properly (here’s a video). BUT when the door has manual flush bolts and no closer on the inactive leaf, the coordinator serves no purpose. The inactive leaf is closed and latched manually (by a person).
What are cremone bolts?
Definition of cremone bolt
: a fastening used on double doors and casement windows that has vertical rods moved up and down so that the ends of the bolts engage the top and bottom of the frame.
What feature is built into flush bolts that prevents the bolts from being forcibly retracted?
AUXILIARY LATCHBOLT
AUXILIARY LATCHBOLT A supplementary latch which, when the door is closed, automatically deadlocks the latchbolt. Protects the latchbolt from forced retraction or credit carding.
What is a foot bolt?
Definition of foot bolt
: a bolt operated by foot pressure and attached to the bottom of a door to hold it in either open or closed position.
How do you unlatch a double door?
Pull back the latch and hook bolt by pushing the handle down. This makes it possible for the door to be opened. Push the handle down and turn the key away from the lock edge to open the secondary door.
What is a latch bolt?
Latch bolt An extremely common latch type, typically part of a lockset, it is a spring-loaded bolt with an angled edge. When the door is pushed closed, the angled edge of the latch bolt engages with the lip of the strike plate; a spring allows the bolt to retract.
What is a slip bolt?
Slip-critical joint, from structural engineering, is a type of bolted structural steel connection which relies on friction between the two connected elements rather than bolt shear or bolt bearing to join two structural elements.The “turn of the nut” method is also widely used to achieve that state of friction.
What is a door lock set?
A lockset (alternatively lock set) is the hardware and components that make up the locking or latching mechanism that can usually be found on a door or other hinged object but can also include sliding doors and dividers.
What is flush panel?
A flush panel door is made of a core (core can either be solid timber or other materials) enveloped with an outer covering of choice materials.This being said, a flush panel door can be customized to accommodate any type of hardware. It can also be fire rated for additional safety.
What does flush mean in wood?
A flush door comprises a single piece with a wood veneer, MDF or laminate outer layer, attached with an adhesive. Compared with stile and rail, or panel doors, flush wood doors offer fewer options for customization.
What is flush shutter?
Flush Door are made by using Timber frame which are Covered by plywood or MDF on both sides of door and hollow portion of door filled with cardboards/hardwood.Flush doors have plain shutters so they are easy to maintain and clean as they don’t have Designs or grooves in which dust will gather.
What is a rebated pair?
A rebated door pair is where you have two single doors that have had the lip removed from the edges of the door. So where you’d normally see a gap between a pair of doors, removing the lip allows these doors to interlock instead.
What is a door rebate?
A Door Rebate is a deep groove that is cut into a door frame– it’s what the latch is attached to. The Door Rebate Kits go hand in hand with latches, sash locks and deadlocks and are often finished using brass, stainless steel, chrome or nickel which prevents them from rusting.
Contents