What Is A Dummy Spindle?

This is a dummy spindle used for door knobs on doors that the spindle does not go all the way through. This spindle is perfect for closet doors or can even be used on swinging doors or cabinets that have much larger knobs.

What is a dummy knob used for?

Dummy door knobs are one-sided “fake knobs.” They’re usually installed on the surface of a door or behind it. Some come in pairs so you can use them on double doors. These types of door knobs don’t have any working parts. They’re good for a shallow closet or small pantry and the interior of French doors.

What is a dummy lockset?

Dummy knobs do not turn. They don’t have locks, axles or latches. Dummy knobs are fake, fixed knobs used to open and close a door that doesn’t have a traditional latch. Available in common designs including handlesets and levers, dummy knobs also are used to dress up inactive doors.

What is a doorknob spindle?

A spindle is a length of square rod or bar, made from metal, usually steel, which connects two Door Handles or Door Knobs together on either side of a door. The spindle locates into the square holes found at the back of a set of door handles or door knobs.

How do you measure a door knob for a spindle?

The size of the square rod, measured across the flats
Find the largest drill that will go into the hub. That’s probably the spindle size. Remember, some locks use two different size hubs. You will need to measure both sides of the lock.

What is the difference between dummy and passage door knobs?

The main types of door functions are Passage (doors that don’t require locking), Privacy (a door that can be locked by a button on the inside), Dummy (has no mechanical latch and acts only as a pull), and Interior Mortise (door with an active latch with skeleton key lock).

Can you mix doorknobs?

Yes, it will need to be the same design but you can use two different colors – one for inside and the other for outside the room.When you close the door behind you, the color of the interior handle will match the style of the room and you don’t have to worry about it clashing with the rest of your home.

Can you use a regular Handleset as a dummy?

Yes you can use it as your dummy handles. Thats what we used for our closet doors, instead of buying dummy handles. Just use the front and back of the handles, and leave out the latch.

Can you cut door spindle?

It is simply necessary to hold the spindle in a vice and cut it down with a hacksaw, but be sure not to cut it too short. Whilst in use, plain spindles can move out of their location holes in the back of one handle into the opposite handle.

What do grub screws do?

A set screw, also known as a blind screw or a grub screw, is a type of screw generally used as a detent to secure an object within or against another object, usually without using a nut (see bolts compared with screws). The most common examples are securing a pulley or gear to a shaft.

How do you attach a door knob to a spindle?

Holding the knob which is on the spindle, slip the spindle through one of the door plates and guide the spindle through the square hole in the door latch. Slide the other door plate onto the pro- truding spindle and screw the remaining knob onto the spindle, snugly to hold plates in place.

Why are some door spindles split?

The split spindle is designed to replace the solid spindle of a door handle allowing the external handle to operate the lock mechanism with a cylinder key only. The inside the handle can be operated as normal for a quick and easy exit.

What is the standard size hole for a door knob?

2 1/8"
The Bore hole is the large diameter hole where the door knob is mounted. The standard sized bore hole is 2 1/8″ in diameter. Through the edge of the door there is a 1″ cross bore that extends from the edge of the door through the bore hole.

Can you turn a regular door knob into a dummy door knob?

Yes, you can turn regular door knobs into dummy door knobs.You can also install the set of two door knobs as you normally would, but not including the latch. These knobs might still turn, but without a latch, they function like dummy door knobs.

What is a double dummy door knob?

A double dummy set includes hardware for each side of the door, yet with no lock or latch. The knobs or levers don’t turn or operate a latch. Double dummy sets are ideal for closet doors, pantry doors, or side-by-side French doors (used with roller catch, flush bolts, or surface bolts).

What do you call a door knob that doesn’t turn?

Half dummy door knobs are non-locking door knobs that don’t have to be rotated or turned when opening or closing a door. Instead, you simply pull on the door to open it. Half dummy door knobs are mainly used on double doors that close side-by-side, such as on cabinet and wardrobe doors.

What is full dummy?

Full dummy – These sets are full-size door knobs or handlesets that have no mechanical. latch mechanism. They are flush mounted and require no mortise, or hole, through the. face of the door. Full dummy sets are used in certain decorative applications such as … see more.

Does black go with oil rubbed bronze?

Because of this slightly warm undertone, Oil-Rubbed Bronze will coordinate well with most other black and dark brown finishes. The finish is covered in a matte protective coating.

Do doorknobs have to match bathroom fixtures?

Bathroom faucets do not need to match light fixtures and doorknobs. In fact, by mixing finishes on your bathroom faucets, fixtures and doorknobs, the decor will be intriguing and layered instead of monotonous. However, take care that the finishes compliment each other. Aim for a cohesive style.

Do all doorknobs in house need to match?

You do not have to have matching door knobs throughout the house. A lot of vendors will have designed “families” of door hardware for this very reason.You can play with a different finish for the cabinet hardware or light fixtures but make sure all the door hardware has the same finish to look cohesive.

How do you make a door knob not turn?

1. Jiggle the Door Knob and Lubricate. Occasionally the problem could be a minor issue that can be solved by just jiggling the doorknob to get the stuck part loose.
2. Check the Latch and Doorknob Assembly.
3. Check the Plates.
4. Check the Tubular Latch.
5. Check the Latch Body.
6. Check the Rotating Lugs.
7. Re-Attach the Knob.
8. Make Adjustments.