Chine: The line where the boat’s bottom and sides join is called the chine. Described as either hard or soft, chines define the shape of the hull as either boxy or rounded.
What is the purpose of a chine?
Chines on a boat helps keep a vessel upright and stable in the water. There are however a few different factors which includes the vessel size and the dead rise angle. If you are buying a boat there are some many factors one needs to consider. One of these is the chines a vessel has and the type of chines.
What is a chine plate?
A chine in boat design is a sharp change in angle in the cross section of a hull. The chine typically arises from the use of sheet materials (such as sheet metal or marine ply) as the mode of construction.
What is the purpose of a chine on a boat?
Chined hulls extend the waterline beam so that when the yacht heels it effectively heels at a wider point from the centreline, effectively maximising form stability.
What is a chine line?
In aircraft design, a chine is a longitudinal line of sharp change in the cross-section profile of the fuselage or similar body. The term chine originates in boatbuilding, where it applies to a sharp profile change in the hull of a boat.
What is a chine on a aluminum boat?
The chine of a boat refers to the change in angle in the cross-section of a vessel’s hull. If you are looking at a boat straight on from the front or back, the bottom of the hull can be many different shapes. Some are extremely pointed while others are on the rounder side of the spectrum.
What do reverse chines do?
Reverse chines push back the water, therefore this keeps the boats occupants dry. It achieves this by not allowing the water to spray across the side of the boat.A boat with reverse chines has the ability to ride over bigger waves in rougher water and weather.
What is chine lock?
chine lock is when you initiate a hard turn and the boat simply won’t react without cutting the throttle. you can try to turn the boat out of the turn but it won’t react.
What is chine walking on a boat?
The chine walking experience refers to the situation occurring with high performance vee-hulls as the boat accelerates, lift increases and the running surfaces raise out of the water.
What is chine width?
Re: How to measure the chime on your boat
The chine is the edge/angle where the side of your boat meets the bottom of the boat. Unfortunately, because of various boat designs, where your boat chine begins and ends may be different than the chine on another make or model.
What is a boat Strake?
On a vessel’s hull, a strake is a longitudinal course of planking or plating which runs from the boat’s stempost (at the bows) to the sternpost or transom (at the rear).The word derives from traditional wooden boat building methods, used in both carvel and clinker construction.
What does the word chines mean?
1 : backbone, spine also : a cut of meat including all or part of the backbone. 2 : the intersection of the bottom and the sides of a flat or V-bottomed boat.
What is a spray rail on a boat?
Spray Rail is a Rigid Vinyl Rub Rail that is designed to provide protection from water spray and keep the boat dry.Spray Rail also adds lift to your boat making for a faster boat! NOTE: Certain hulls may not provide a predetermined rail location.
What is a multi-chine hull?
Hard-chines originated in the aboriginal skin on frame designs of Greenland. They have one sharp angle (or chine) on each side of their hulls. Multi-chine or soft-chine kayaks hail from Alaskan and Canadian waters. They have multiple chines, with less acute angles.
What is a chine Isle of Wight?
‘What is a Chine’? is the question we are most frequently asked – Chine is a word used only in the Isle of Wight and Dorset and means a deep narrow ravine with water running down to the sea.
What is the purpose of the chine on an aircraft tire?
The “chine” tire is a nose wheel tire designed to deflect water and slush to the side and away from intakes on aft-fuselage mounted jet engines. It consists of a flared upper sidewall protrusion which deflects the spray pattern of water or slush displaced by the tire’s contact with the runway.
What are chine runners?
Now, chine runners are simple flanges on the bottom of a flat bottomed boat, like this: which are used as a substitute for a leeboard or daggerboard, etc, to allow a boat to sail to windward. The advantages are obvious – simple with shallow draft.
What are the ridges on the bottom of a boat called?
Many offer shapes called “strakes” that are long ridges on the hull designed to further stabilize the boat, which they certainly do. These popular hulls are also called cathedral hulls.
What is gunnel on a boat?
: the upper edge of a ship’s or boat’s side. gunnel.
Are reverse chines good?
There’s a few plate designs getting around now with pronounced reverse chines. They look very nice indeed and look as though they would offer excellent stability, and combined with a reasonable deadrise at the stern, would be a good ride in a bit of slop.
Are deep V boats stable?
While a deep V boat can’t take you as far into shallow waters or stay as stable in calm waters as a flat bottom boat, they deal with choppy water far better that their flat bottomed cousins. In addition to having what it takes to brave choppy waters, a deep V boat will keep you much drier.
Contents