A castellated nut, sometimes referred to as a castle nut, is a nut with slots (notches) cut into one end. The name comes from the nut’s resemblance to the crenellated parapet of a medieval castle. Castellated nuts are sometimes referred to incorrectly as castigated nuts.
What is a castle nut?
A castellated nut, also known as a castle nut, has three notches in one end, giving an appearance similar to the crenellated battlements of a castle. Castellated nuts are a positive locking device that’s used to ensure that the nut remains affixed and resists vibration.
What is the difference between a castle nut and a slotted nut?
Castle Nuts
The difference between a slotted nut and a castle nut is the latter has turret geometry on the top of the nut. The nut thicknesses are the same as a slotted nut. Like slotted nuts, castle nut applications are similar using steel pins and taper or split pins, to lock the nut into position after tightening.
How do castellated nuts work?
Castellated nuts are distinguished from other types of nuts by their use of a pin. In addition to a bolt, they require the use of a pin. After tightening a castellated nut onto the end of a bolt, a pin is inserted through the center. The pin will essentially hold the castellated nut in place.
How do you drill a hole in a castle nut?
How Do Cotter Pins Work?
- Attach the castle nut to the bolt and fasten it into place.
- Make a mark on the bolt or leave the castle pin installed.
- Using a drill and bit, drill a hole into the bolt at this point straight through the cross-section of the bolt.
- Remove any metal filings from the hole and insert the cotter pin.
What is a castle nut made of?
Castle nuts are generally manufactured in steel or stainless steel, with other materials also available. They are available in a range of sizes – with specials available to order – and thin versions also available.
Where are castle nut used?
It is a positive locking device. Castellated nuts are used in low-torque applications, such as holding a wheel bearing in place.
Are all castle nuts the same?
Are Slotted and Castle Nuts the same thing? The answer is no they are not the same, but they do serve the same purpose.
What is a self locking nut?
A Locknut (self-locking nut, locking nut), is a nut which resists loosening through vibration and normal use. This trait makes them essential hardware for a multitutde of applications. Unlike free spinning nuts, lock nuts make use of a deforming elastic or metal material to stay in position against torque and shock.
Why slots are provided in the slotted castle nuts?
Why do castle and slotted nuts have slots?” Castle nuts and slotted nuts have slots so that they can accommodate a cotter, split or taper pin or wire, which prevents a nut from loosening.
What size is castle nut?
Castle nut size refers to its nominal thread diameter. Typically, sizes range from about 1/4″ to 1 1/2″. Size is specified in inches, usually fractional rather than decimal. Nut width and height vary with the size of the castle nut.
Is castle nut self locking?
Non-Self-Locking Nuts
The castle nut, AN310, is used with drilled shank AN hex head bolts, clevis bolts, eyebolts, drilled head bolts, or studs. It is fairly rugged and can withstand large tensional loads. Slots (called castellations) in the nut are designed to accommodate a cotter pin or lockwire for safety.
What is the nut that has a dome over the top to keep the bolt from being exposed?
Cap nuts or acorn nuts have a domed shape and hexagonal driving surface. You can often install them by hand. They screw onto the exposed threads on a bolt or threaded rod to protect against injury, damage and to add a decorative look.
What is slotted hex nut?
Slotted Hex Nuts are hex nuts with slots protruding from the top, similar to castle nuts. To use a slotted nut, a hole is drilled through the threaded portion of a bolt or stud. A cotter pin is then placed through the slots and hole and deformed so it cannot easily be removed.
What does a castle nut must be used with to properly lock onto a component stud?
Cotter pin is a fastener used for locking the nuts onto the bolts. You have to drill a small hole into the bolt to use it.
What do cotter pins look like?
Also known as a split pin, a cotter pin is a simple fastener that’s used to secure a bolt — or any other rod-shaped fastener — in place. As shown in the adjacent image, cotter pins consist of a narrow U-shaped piece of metal with a flared and circular top.
What does a stop nut do?
Lock Nuts with Nylon Inserts
Nylon insert lock nuts—also known as nylon nuts and stop nuts—are a prevailing torque, locking nut that resists loosening caused by vibration and normal use.
What are nuts also called?
Also widely known as nuts are dry drupes, which include pecans (Carya illinoensis), almonds (Prunus amygdalus), macadamia (Macadamia integrifolia), candlenut (Aleurites moluccanus), water caltrop (Trapa bicornis) and walnuts (Juglans regia).
What is a Simmonds nut?
Self Locking Nuts. Provide excellent vibration resistance, product quality consistency and technical performance. Special Nuts. High mechanical resistance and performance consistency, lightweight and high re-usability, including self-locking -collar nuts, crimped nuts and many more.
Why is a washer installed under a nut?
On the nut side, a washer is generally needed to provide a smooth bearing surface as the fastener is torqued, and also to help prevent the turning nut from twisting the underlying part itself.
What is a check nut?
(Mech.) a secondary nut, screwing down upon the primary nut to secure it. a nut which is screwed up tightly against another nut on the same bolt or screw, in order to prevent accidental unscrewing of the first nut. See also: Check, Nut.
Contents