These are bypass brackets, which have a lower profile than a standard bracket, so that C-rings, which do not completely encircle the rod, can pass over them. These brackets are only used in the middle of the rod—you must use standard brackets at each end.
How do C curtain rings work?
They feature a convenient C-shape opening that allows them to move freely over brackets that would otherwise impede movement and can be sewn directly onto your drapery or attached to drapery hooks. They’re the finishing touch needed to give your window treatment all-encompassing good looks.
What are C-rings for curtains?
C-rings allow one-way draw curtains to be used on longer rods requiring a center support bracket(s). These rings are a great choice for covering large windows or sliding glass doors.
How long can a curtain rod be without a middle support?
A center bracket is needed in almost any length greater than 5 to 6 feet, if you want to avoid any sagging. However there are “C” rings that will go over the bracket so that the drapes/curtains can be pulled to one side (either side, in fact).
What is traverse curtain rod?
What are traverse curtain rods? Traverse curtain rods are a mechanized track system product that allows the user to open or close their curtains with a pull of a string.
How many rings should a curtain panel have?
Industry standards are 3 to 4 rings per foot of the width of your drapery panels.
How do you hide clips on curtain rings?
HERE’S THE QUICK TIP ON HOW TO HIDE CURTAIN RING CLIPS: just pinch the back of the curtains and clip the rings an inch or so down from the top.
Do curtains have to touch the floor?
So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.
How can I get my curtains to close in the middle?
To simply keep the curtains closed, place the magnets just inside the vertical edge where one panel meets another. To seal all the curtain’s edges to the window opening, position the magnets across both sides and the bottom, if not the top of the curtain as well.
How do Passover brackets work?
Passing brackets are used when creating a bay window pole using C rings and corner joints. The passover bracket allow the C Ring to pass over without obstrution. The corner joint is an elbow design and the curtain will need to be helped around it. Suitable for a two bend bay with angles up to 60 degrees.
How far should a curtain rod extend past window?
Curtain rods should extend at least 3 to 6 inches past the window frame. Just as hanging curtains above the window frame makes the window appear taller, Bob Vila writes that extending the curtain rod past the window frame makes the window appear wider.
How high above the window should a curtain pole be?
Assuming you’re outfitting a living room or bedroom with average ceiling height (8 feet high), an interior designer’s rule of thumb would be to mount the curtain rod about a half-foot above the top of the window frame—even higher if the total space between the top of the window and the ceiling line is less than 12
How do you make curtain rods stronger?
To reinforce your curtain rod brackets and secure your curtain rod, try these methods:
- Use curtain rod anchors or longer screws.
- Use a thicker or more durable curtain rod.
- Install one or more center support brackets.
Can I hang regular curtains on a traverse rod?
Regular curtains will not evenly hang in a traverse rod. But with a few sewing and pinch-pleating, you can turn regular curtains into pinch pleat curtains.
Are pinch pleated drapes out of style?
Pinch Pleats: All you Need to Know! Yes, you may say they are traditional, but perfect pleats can never go out of style, no matter what. Pinch pleats are a much-preferred option to finish off the top of drapes and provide that extra light and privacy control you want.
Can you hang rod pocket curtains with hooks?
Pinhooks can give you the custom-pleated look you want without the wear and tear on your wallet that nobody wants. The best news is that with a little ingenuity, pinhooks can be used with rod pocket curtains and a curtain rod, sparing you the expense of the more traditionally-used traverse rod.
How far apart should curtain rings be spaced?
I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.
How far apart should curtain hooks be placed?
Hooks should be placed every 4-6 pockets approximately. It is important to make sure that the hooks are evenly spaced along the heading tape.
How do you convert rod pocket curtains to rings?
Beginning at one end, attach a hook ring to the back of the curtain rod pocket where indicated with chalk. Attach hooks an inch down to ensure the hooks don’t show when you hang the curtains. Continue attaching rings with hooks where you marked with chalk at the same level.
What is the longest curtain rod made?
240 inch curtain rod
- Material: Metal.
- Rod Diameter: 0.63”
How much should a curtain pole overhang?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again.
Contents