The basic function of both bridge cranes and gantry cranes is to lift heavy objects. Because of how overhead cranes are built, they can reliably lift objects that are very heavy in a way that is safer than many lifting alternatives.
What category is a bridge crane?
Bridge cranes can be provided for CMAA Class A, Class B, Class C, Class D, Class E and Class F with capacities to 200 tons and spans to 150 feet. We can provide simple single girder bridge cranes for general usage as well as custom built double girder bridge cranes for all industries.
Where is a overhead crane used?
Overhead cranes are also known as bridge cranes within the industry. They are commonly found in industrial environments used in production, engineering, automotive, container handling, mining, power, petroleum, shipyards, metals production, galvanizing and waste management, to mention but a few.
What are the three basic types of overhead cranes?
The different types of overhead cranes include gantry cranes, jib cranes, bridge cranes, workstation cranes, monorail cranes, top-running, and under-running.
What is a hammerhead crane?
Definition of hammerhead crane
: a heavy-duty crane with a horizontal counterbalanced jib.
What is hoist in crane?
A hoist is a machine that performs a single task very well: lifting and lowering a load on a vertical plane (Figure 1, Motion 3). Hoists are situated on the primary horizontal beam of the crane, called the bridge girder.
Is a hoist an overhead crane?
A hoist could be considered the most important component of an overhead crane system because it’s the device that actually performs the lifting and lowering of a load. An overhead crane’s hoist lifts and lowers a load by means of a drum or lift-wheel, in which chain or wire rope wraps around.
What type of crane has a bridge supported by two or more legs?
Gantry cranes have a bridge that is supported by two a-frame rigid steel legs that rest on the floor. The legs are commonly equipped with casters so crane can be moved to different parts of a building.
Which type of crane is used for densely populated area *?
Telescopic Cranes are the best type of cranes when it comes to transferring objects to a high place. They offer one of the best servicing possible in terms of ports.
What is the difference between a bridge crane and gantry crane?
Bridge cranes are mounted inside of the building they operate in. This makes them great for warehouse type factories that are often crowded and where every inch of space is valuable. Gantry cranes are typically on wheels or mounted to a track system .
What’s gantry mean?
Definition of gantry
1 : a frame for supporting barrels. 2 : a frame structure raised on side supports so as to span over or around something: such as.
What is crane pedestal?
Pedestal crane is the main equipment to transfer cargo loads from supply boat to the platform. Cargo may vary from food to spare parts, tote tanks, consumables, personnel via transfer basket, etc. Platform crane capacity and outreach depends on type of platform and its intended usage.
What is rough terrain cranes?
Rough terrain cranes are mobile cranes mounted on an undercarriage with rubber tires, usually four oversized tires. Typical uses are for lifting on job sites with uneven conditions.
Who uses cranes?
1. Automotive and Transportation. A popular use of overhead cranes within the automotive industry is on assembly lines. They move automotive materials along different stations until the end product is completely built, making assembly lines much more efficient.
What is an electromagnet crane?
Magnet Crane
Also referred to as electromagnetic cranes, these cranes are used to handle and move metals like steel and iron.They operate using a magnetic field that is formed by an electric current passing through windings around the magnet. The magnet is turned on and off when needed by the electric current.
What is difference between crane and hoist?
1. A hoist is a device used for lifting and lowering loads while a crane is a device used for moving loads in different directions.
What is the end of a crane called?
One of the largest parts of the crane is the boom. You can easily recognize this as the long steel arm that spans the length of the machine. This part of the crane begins at the operator’s cabin and ends at the hook. The boom distributes the weight and provides the necessary height to lift each load.
What is plugging on a crane?
Plugging: A control function which accomplishes braking by reversing the motor line voltage polarity or phase sequence. Protective Panel: An assembly containing overload and undervoltage protection for all crane motions.
Why do cranes rotate?
Rotate means to turn around an axis or centre point. 5. The jib has a fulcrum on top of the vertical column. It has an input force or effort from the diagonal cables right at the top of the crane pulling the jib up, and a load pulling the jib down.
What is a jib boom on a crane?
The boom is the horizontal beam that extends from the support and holds the load. The mast is the vertical beam or pipe steel that supports the boom and allows the system to rotate. The moveable hoist is used to lift, position, and lower a load. Another component of most jib cranes is the trolley.
What is a monorail crane?
A monorail crane system is a stationary, overhead track on which trolleys travel to carry loads from one place to another in a facility. Monorail cranes are an ideal solution for linear, overhead material handling due to the fact that they enhance production workflow and create a safe and secure work environment.
Contents