Blinds Too Wide? Try An Outside Mount. The easiest solution for blinds that are too wide is to install them as an outside mount instead of an inside mount.However, if you don’t like the look of an outside mount, you can trim many blinds to allow them to fit within the window frame.
https://www.youtube.com/watch?v=–Hc-1h8ej0
How do you fix blinds that are too wide?
Cutting down the slats
- Align the slats so that they are even.
- Using a clamp or rubber bands, secure the slats together into position.
- Wrap the slats with masking tape to prevent chipping.
- Measure where you want to cut and mark a line with your pencil.
- Lay them on the saw and line up the blade where you need to cut.
Can you cut the width of a blind?
Occasionally window blinds are mis-measured and are too large to fit in the window frame. Most horizontal blinds such as wood blinds and faux wood blinds can be trimmed or cut down to the right width so they can be installed.
Should blinds be wider than window?
Not Adding Width To Outside Mount Blinds
We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
Can you reduce the width of vertical blinds?
How to shorten vertical blinds?You can only shorten vertical blinds from the top of the slat, because you need to use the folded pockets for the bottom weights, which keep the blind in place. Do not measure the length of the slats until you have fitted the track.
Can you trim horizontal blinds?
Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easyall you need are scissors and a screwdriver.
Can you cut blinds with a miter saw?
Put your blinds in your chop saw (miter saw), make sure you get it lined up exactly where you want it. Remember, when you cut, the saw blade will take away a teeny bit extra, so make sure you’ve got the blade lined up on the outside of your line.Aaaannd cut. You did it!
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening.If the shades are installed outside of the window opening called an outside mount the shades typically are wider than the window by a few inches and can also be longer than the window.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How are blinds supposed to fit?
To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top and the bottom by at least 3″.
Can blinds be made shorter?
If your horizontal wood or faux wood blinds are too tall for your window frame, you may be able to shorten them yourself.If you already own wood or faux wood blinds that are just too long, sometimes you don’t need to buy new blinds. You can just shorten the ones you already have.
Can vertical blind slats be cut?
If the vanes on a vertical blind are too long they can be trimmed to the correct length. Because the vanes are made from a thin pvc vinyl material they are easy to cut.
How do you cut roller blinds without fraying?
Use scissors to remove any frayed material or loose strings that you see on the edge that you cut. If you need to make additional cuts or trims, use the same straight edge and knife that you used the first time.
What’s the best way to cut a roller blind?
Make the cut – Cutting roller blinds at this point should be easy. Just cut along the marked line all the way to the rod; do the cutting slowly so as to preserve the material and to ensure a straight line. Use the sharpest scissors to ensure safety and accuracy when cutting the blinds.
What does trim width mean on blinds?
If you’re mounting to the trim, measure the width of the trim at the top of the window. If you’re mounting to the wall, measure the width you’d like the blinds or shades to be. We recommend adding at least 2 or 3 inches to the width of the window opening. ( see photo above)
Can cellular shades be cut to width?
Custom cellular shades, sometimes referred to as honeycomb shades, can easily complement any room’s decor and are quick to install. They can, however, be expensive, especially if you have several windows to cover. An inexpensive alternative is to purchase cordless, presized stock shades and cut them to size yourself.
Does Lowes cut blinds in store?
Minimum Inside-Mounting Clearance (for most brands)
Lowe’s can cut many blinds to custom-fit your windows at no additional cost. Bring in your measurements, and we’ll prepare your blinds while you shop. You can even Special Order just about anything you need for your installation.
How wide should blinds be inside Mount?
Inside-Mounted Vertical Blinds
Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?
What width do blinds come in?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
How much space should be on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
Contents