If you enable overwrite function, Reolink NVR’HDD will overwrite old files when it’s full, covering 64GB at a time.
How long can Reolink NVR record?
How Long Can Reolink NVR Record for
| Bit-Rate/kbps | Total Recordings Channels | Maximum Video Length for 12 TB HDD/days |
|---|---|---|
| 6144 | 8 | 24 |
| 16 | 12 | |
| 8192 | 1 | 145 |
| 4 | 36 |
How long does Reolink record for?
The Record Length on Reolink Client can be set to 5~60 minutes.
Does Reolink record all the time?
Applies to: All Reolink cameras except battery-powered cameras. When you set the camera to continuously record, the camera will keep recording all the time, no matter it detects motions or it doesn’t detect motions. All the Reolink cameras except battery-powered cameras can record continuously to Reolink NVR.
What happens when Reolink SD card is full?
Applies to: All Reolink cameras with Micro SD card slot. Notes: If the SD card is at capacity, then the camera will automatically overwrite the old files and continue to record.
How do I expand the capacity of Reolink NVRs?
Method 1: Add an external HDD via eSATA port. Method 2: Replace the existing HDD with another HDD with higher storage. Method 3: Place another HDD inside the NVR.
Note: The existing HDD storage for these models:
- Reolink RLN8-410 ? 2TB.
- Reolink RLN16-410 ? 3TB.
- Reolink WiFi NVR ? 1TB.
Why has my Reolink stopped recording?
Cause 1: The Motion detection or PIR settings are not set up properly. Cause 2: Abnormal function of motion detection or PIR sensor. For Reolink battery-powered cameras, please enable Siren and manually trigger the camera.
How long does 1TB last for security cameras?
1TB allows 4 cameras to record 24/7 for about a month.
Do I need an SD card for Reolink?
Applies to: All Reolink cameras supporting SD card. Reolink cameras support the TF type SD, SDHC, SDXC micro SD card, but please make sure that the SD card you used meets the requirements in the below table.
The Recommended SD Card Format/Type/Size for Reolink Camera.
| Item | Requirement |
|---|---|
| Read and Write Speed | Class 10 or higher/ ?26Mbps |
| Format | FAT32 |
How long does NVR last?
However, as a general rule, a new IP camera today should last two NVR cycles. So, if an NVR lasts between three to five years that means the IP camera on the network should last between six to 10 years.
How do I make a Reolink record continuously?
How to Set up Continuous Record Schedule
- On Reolink App:
- On Reolink Client:
- Get to Device Setting–Recording– Record Schedule page.
- Click Timer, then select the grids.
- Click Save to save your settings.
- On Reolink POE NVR:
- Get to Menu -> Recording -> Schedule page.
How does a NVR work?
NVR stands for Network Video Recorder. NVR systems record and store video footage directly from the network it lives on. These systems work with an advanced type of camera, called IP cameras.They do so using either an ethernet cable or wirelessly via an existing WiFi network.
What is NVR or DVR?
DVR stands for Digital Video Recorder, whereas NVR stands for Network Video Recorder.Most NVRs are used with IP cameras whereas DVRs are used with analog cameras. It’s important to note that a DVR based system is a wired security system, whereas NVR systems can be a wired or wireless system.
How do I clear my Reolink SD card?
Step 1: Launch Reolink App, then click the button in the picture below to go to the Device Settings-> Device Information-> Storage page. Step 2: Select the SD card, then tap on Format to format the SD card. Note: Please wait for a few minutes for the camera to reboot after tapping on the Format.
How long can I record for with a micro SD card?
For 1080p@25fps,a 32GB micro SD card can record about 40 hours non-stop. For 1080p@20fps,a 32GB micro SD card can record about 3 days non-stop.
What is the difference between SDHC and SDXC?
SDHC (high capacity) cards can store up to 32 GB of data, while SDXC (extended capacity) cards can store up to 2 terabytes (2000 GB). Older devices may not be able to use the SDXC format, so make sure your device does support these larger cards before buying one.
How do I extend my Reolink camera?
WiFi Battery-powered camera: Go to Device setting -> Camera Recording -> Record Settings page, click the Post-Motion Recording Duration to choose the time 8s/15s/30s. Reolink GO PT: Go to Device setting -> Camera Recording -> Record Settings page, click the Post-Motion Recording Duration to choose the time 10s/15s/30s.
How long does 4TB record for?
4TB Hard Drive & 60 Days Storage
The pre-installed 4TB HDD in the NVR can store up to 60 days of video recording. You can enjoy the local Intelligent Playback feature at anytime and anywhere.
Is Reolink any good?
That process, we calculated, only took about five minutes. That’s the beauty of DIY home security products these days: Nice and speedy. Pro Tip: If you don’t have Wi-Fi, we recommend the Reolink Go cam, which is 4G LTE-enabled and can stream and record videos from virtually anywhere.
Why does my SD card stop recording?
An incompatibility between your camera and the SD card you inserted in it could be a major reason why your movie recording has stopped automatically. If your SD card storage space is full, it thereby implies that there will be no space for any more recording, hence leading to a stop in video recording.
Where do Reolink downloads go?
If your camera is inserted with an SD card, the recordings triggered by PIR Sensor or Motion Detection would be stored in your SD card. You can download those recordings via Reolink App & Reolink Client &Web browser.
Contents