In the event of a power outage your SimpliSafe Base Station is equipped with a backup rechargeable battery supply that will keep your Base Station powered for up to 24 hrs. SimpliSafe does not rely on WiFi, and will continue to function over cellular networks.
Can I unplug my SimpliSafe?
You’ll want to unplug the Base Station, then unscrew the one screw under the plug. After that, twist the whole bottom section counter-clockwise and pull away to reveal the batteries. Just take one out, and put it back in, and the unit will reboot. Perfect!
What happens if I unplug SimpliSafe base station?
When one sensor or camera detects danger, it sends a signal to the Base Station, which sounds the siren and notifies you immediately. If it’s unplugged or the power goes out, the 24-hour backup battery keeps you covered. With a monitoring plan, it will alert us and we will dispatch police if there’s ever an emergency.
How do I turn off my SimpliSafe system?
Use the same method to turn off your alarm, whether it’s in Home or Away Mode. Press off on your Key Fob or press off on your Keypad followed by your 4 digit PIN. If a sensor is triggered, there will be a 30 second Entry Delay before the alarm siren sounds and the Dispatch Service is notified.
Does SimpliSafe need to be plugged in?
SimpliSafe says 97% of its customers install their system themselves. All the sensors and devices are paired to the base station, so installation is just a matter of plugging in the station, pulling the battery tabs to activate each device, and securing the devices in place with double-sided tape.
Can SimpliSafe be moved to another house?
You can move your SimpliSafe system to a new home by removing all the components from your old home and setting them up in your new home. All you need is adhesive strips. Then, update your address on your account.
Why does my SimpliSafe keep losing WiFi?
There are two main reasons that a camera may lose WiFi connection. It may be installed too far from your WiFi router, or it may not have sufficient bandwidth on your WiFi. Please contact our customer support for help in diagnosing this issue and confirming the cause.
Does SimpliSafe interfere with WiFi?
The SimpliSafe system communicates wirelessly with its sensors. Most interference is not detrimental to the system’s function and should resolve on its own.
Is SimpliSafe coming out with outdoor cameras?
SimpliCam is the only camera that SimpliSafe provides till now. The announcement of SimpliSafe outdoor camera was done but there is no report of it coming soon.
Simplicam-A Brief Guide, Specifications and Features.
| Features | |
|---|---|
| Night Vision | Yes |
| Resolution of Video | 720p HD |
| Two way Audio | Yes |
| Compatibility with Smartphone | Yes |
Can SimpliSafe be hacked?
SimpliSafe: Unlike ADT, hacks aren’t uncommon for the newer security company SimpliSafe. Rather, in 2019 a Youtube account named LockPickingLawyer discovered that they could hack the SimpliSafe security system with a $2 dongle from Amazon when physically near the system.
Does SimpliSafe tell you when a door opens?
“Your SimpliSafe will warn you that a window or door is open when you turn the alarm on. Open doors or windows will not be protected until they are closed. Once they are closed, the base station will start monitoring them.”
How do I remove SimpliSafe from my camera?
To remove a sensor from your system:
- Open the Menu on your keypad (using your Master PIN)
- Select Devices and navigate to the device you’d like to remove. Select it with the right rocker.
- Scroll to the bottom of the sensor’s listed settings and select Remove.
- Press Off to exit the menu.
Can SimpliSafe tell you what door is open?
SimpliSafe will warn you that a door or window is open with a message on the Keypad that says 1 Entry Sensor open or Entry Sensors open, and also with a voice prompt from the burglar alarm’s Base Station. Close open doors / windows.
What is the downside of SimpliSafe?
One other con worth mentioning is the high up-front cost. Unlike many home security companies that rent you the equipment for a low monthly fee, SimpliSafe requires you to buy the equipment up-front. The exact cost will depend on the number of sensors, alarms, and detectors you need, but on average will be around $500.
Does SimpliSafe have a range extender?
SimpliSafe does not have a range extender or the ability to link two base stations. The DIY set-up method to ensuring maximum range on your security system is to move your sensors and base station around testing them intermittently until you find a configuration that works.
How long does SimpliSafe battery last?
How long do the batteries last?
| Component | Battery/Batteries Used | Average Battery Life Expectancy |
|---|---|---|
| Entry Sensor | 1 CR-2032 Lithium 3V | 5-10 years |
| Motion Sensor | 1 CR-2032 Lithium 3V | 3-5 years |
| Glassbreak Sensor | 1 CR-2032 Lithium 3V | 3-5 years |
| Smoke Detector | 1 CR-123A Lithium 3V | 3-5 years |
Can I resell my SimpliSafe system?
Your devices can be used by a new owner without compromising your information or security. They will not be using your account, but instead will be able to start fresh with their own. To transfer ownership of your SimpliSafe devices, you must first cancel any active monitoring services you are subscribed to.
What do I do with old SimpliSafe?
Moving In. Now that you’re at your new home, setting your system back up is simple. Just put your sensors back up the same way you did when you first installed your systemadhering them to the wall. If you need new adhesives (or additional sensors to cover all areas in your new place), you can order them here.
Is New SimpliSafe compatible with old?
If you purchased a system in 2017 or earlier, you have the Original SimpliSafe.New sensors can be added to our latest SimpliSafe system in one of two ways. If you are adding a single sensor, open the Menu on your keypad (using your Master PIN) and select Devices, then Add device and follow the instructions.
Is SimpliSafe a 5g?
Confirm that your router is broadcasting your network on a 2.4 GHz signal, not 5GHz. (The SimpliSafe system is set to work with 2.4 GHz WiFi networks in order to provide wider coverage. 2.4 gHz penetrates walls and floors much better than 5 gHz networks.)
Is SimpliSafe monitoring worth it?
I definitely recommend going with a paid monitoring plan. At $24.99 per month, the SimpliSafe Interactive plan is affordable, and it comes with camera support, professional monitoring, and of course SimpliSafe’s handy mobile app. SimpliSafe’s monitoring is some of the most affordable you’ll find.
Contents