Soft Plastics (non-constant retrieve): For soft plastic baits such as worms, creatures, bugs, craws, tubes, etc, a reel with a fast gear ratio of higher than 7.0:1 will create maximum performance.
https://www.youtube.com/watch?v=meuM5Av21I0
What action is best for worm fishing?
Generally, graphite is lighter and more sensitive (perfect for plastic worm and jig fishing), fiberglass is softer and more forgiving (ideal for many treble-hooked baits) and composites are a compromise between the two. Actions are also critical. For lighter lines and baits, a light action rod is typically best.
What gear ratio is best for senkos?
You can wacky rig a senko, fish it on a Texas Rig or set it up on a Neko Rig. All of these can be great ways to catch bass. Many anglers often ask what gear ratio of reel should be used when fishing with a senko. In general, the best gear ratio to use while fishing with a senko is either a 6:1 or 7:1.
What is a fast gear ratio for fishing reels?
Anglers typically divide gear ratios into three categories: slow, medium and fast. Roughly speaking, “slow” reels have ratios below 6:1; medium reels are 6 to just under 7:1 and fast reels are 7:1 or faster.
What is a 8.1 gear ratio good for?
High gear ratio reels | 7.1:1 thru 8.1:1
High gear ratios are best for techniques where taking up slack and bringing a bait back to the boat are critical. Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high-speed reel.
What are 6 6 rods used for?
Rods under 6’6” are ideal for trout, panfish, and younger anglers. Longer rods over 7′ are popular for some bass fishing techniques such as using swimbaits and crankbaits and longer rods are also the go-to choice for anglers targeting salmon and steelhead.
What is a 7 3 medium/heavy rod good for?
7’3″ Medium/Heavy Casting Rod Specs
SUGGESTED TECHNIQUES: This all purpose rod is great for a large multitude of techniques. From Texas rig to Jigs to large Spinner baits, and everything in between.
How do I choose the right gear ratio?
The conventional procedure for selecting gear ratios is to pick ratios that run the engine rpm to redline at the end of the medium and longest straights, and pick the lower gear ratios to minimize the rev drop at each shift. This method minimizes the number of shifts per lap.
How fast should I reel in a crankbait?
The correct speed of any crankbait reel is 21 inches of line pick-up per turn of the reel handle. Most of that information is on the internet or on the packaging. If it isn’t, measure what your reel is doing with a ruler. It’s that important.
What is a 5 to 1 gear ratio?
For example, if a motor drives a 12T gear to a driven 60T gear on an arm, the 12T driving gear has to rotate 5 times to rotate the 60T driven gear once. This is known as a 5:1 ratio. The torque output is 5 times as much, however, the speed output is only 1/5.
Are more ball bearings in a reel better?
When they’re considering purchasing a reel, anglers can’t help but notice how many bearings it offers. But the truth is that reels with lots of bearings aren’t necessarily better. The quality of the bearings, and the quality of the reel that contains them, are much more important than the number of bearings.
What is the best gear ratio for salmon fishing?
A 7.1 ratio is great for fish that are going to chase a bait at high speed like barracuda or tuna as the spool turns 7 times per crank of the handle(more effort to turn the handle under load but a faster retrieve).
What is a good gear ratio for bottom fishing?
Best Gear Ratio For Bass Fishing
Artificial lures are the predominant baits used for bass fishing. For this reason, we recommend using a medium gear ratio around 6:1 like our bass reel to cover the large variety of bass lures.
What is a 7.5 1 gear ratio good for?
7.5:1 Reel – With my 7.5:1 gear-ratio reel, I like to use this reel when I’m fishing single-hook lures like a buzzbait, a spinner bait, bladed jigs and a frog.
What does a 7 5 1 gear ratio mean?
For example, a 7.5:1 gear ratio means that the spool rotates 7.5 times for every single turn of the handle. So, the higher the gear ratio, the faster the retrieve speed of your reel.
What is a 6/10 medium/heavy rod good for?
The KVD Tour 6-6 or 6-10 medium heavy action makes that easier, especially when fishing spinnerbaits or swim jigs. It has a softer tip that loads the rod best for the low trajectory/soft splash entry you need.
What is a 6 7 medium/heavy rod good for?
1) 7’6″ casting rod, medium-heavy action, fast tip – Use this for your heavier baits such as larger jigs, frogs, crankbaits, flipping and pitching baits.
What baits to throw on a medium rod?
Medium and medium-fast rods will usually provide a little more casting distance and still provide adequate hooksetting power. These actions are often used for applications that involve treble hooks, such as crankbaits and topwater lures or other reaction baits such as spinnerbaits.
What is the best worm rod for bass fishing?
There are many options, but the best for a worm setup is a medium, fast action rod. The action rod is often referred to the “backbone” of the rod, and for good reason. It is the strength of the rod when you set a hook, fight a bass, or even work the lure.
What rod is best for Chatterbaits?
The best rod length for chatterbait is 7′ to 7’3”. This is the ideal length to balance optimal casting distance and accuracy, and also helps to control big fish close to cover, since it provides enough leverage for this purpose.
Is medium/heavy good for bass?
If you use a rod that is too heavy for the species you’re fishing the rod will be too strong for the fish and can lose your bait or yank away from the fish. For larger black bass, walleye, catfish, and others, a medium power with moderate-fast or fast action rod works well.
Contents