Determine what depth you normally fish for Walleye at, and choose the correct gear ratio reel to satisfy you. If you are fishing under twenty five feet, a good gear ratio would be 5.1:1 or somewhere close to this ratio. The drag of your Walleye reel is important as well.
What gear do you use for walleye?
As you gain an understanding of how to fish for walleye, we recommend purchasing a lighter rod and reel combo specifically for jigging and live bait. Ideally, the set up should be a 6′ medium light, fast action spinning rod with a medium-sized 30 reel.
What is the best gear ratio for fishing?
Best Gear Ratio For All Around Fishing
For this, we recommend using a slow to medium gear ratio from 4.9:1 to 6:1 for all-around fishing like those found in our fishing combos. This will allow you to effectively use the widest range of lures and baits.
Is a higher gear ratio better for fishing?
Higher gear ratios tend to lead to more speed, but less power. This can mean reeling in heavy fish is difficult while smaller fish benefit more from the increased speed.
What gear ratio is best for buzzbaits?
Opt for a high-speed reel with at least a 7:1 retrieve ratio, though 8:1 might be better. The faster the retrieve speed, the easier it is to get the buzzbait’s blade turning, and the faster you can wind it in between casts.
What depth do you fish walleye?
Walleye are generally caught between 10-40 Ft. A typical mid-sized lake in the Midwest would likely hold Walleye between the depths of 10-15 Ft. during the Spring, 15-25 Ft.
What is a 8.1 gear ratio good for?
High gear ratio reels | 7.1:1 thru 8.1:1
High gear ratios are best for techniques where taking up slack and bringing a bait back to the boat are critical. Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high-speed reel.
What are 7 5 1 gear ratios good for?
Medium speed baitcaster
Next, we’ve got medium speed reels, which includes models with a gear ratio from 7.1:1 to 7.9:1. This is a really good standard gear ratio for baitcasters that can be used for a wide variety of fishing tactics – anything involving spinnerbaits, chatter baits, or shallow diving crankbaits.
Are more ball bearings in a reel better?
When they’re considering purchasing a reel, anglers can’t help but notice how many bearings it offers. But the truth is that reels with lots of bearings aren’t necessarily better. The quality of the bearings, and the quality of the reel that contains them, are much more important than the number of bearings.
What is a good gear ratio for flipping?
By today’s standards 9.1:1 is worth consideration and there are several new reels with ratios above 10:1. Good Luck and Good Fishing!
What does 6.2 1 mean on a reel?
Extra high can be over 6:1 with reels like the new 20 Saltiga 14000 XH being a 6.2:1 speed. What that means is how much line with each turn of the handle comes onto the reel, and in some cases it can be over 30cm of line put back onto your spool every full turn of the handle.
What gear ratio is best for spinnerbaits?
Spinnerbaits: For spinnerbaits, a moderate retrieve reel of around 6.3:1 ratio will perform adequately. This speed allows for power to move larger bladed baits through the water, but also has the speed to burn in baits when need be.
What is a good gear ratio for a crankbait reel?
A slow reel is the ideal choice for most crankbaiting. A reel with about a 5:1 gear ratio is going to help you get your baits to their maximum depth and also give you superior feel, so you know exactly what’s going on with your lure. My favorite cranking reel is the new Lew’s BB1.
What’s the best line for crankbaits?
Fish your crankbaits with light line. Smaller and thinner lines give you a better wiggle, and you’ll get more casting distance with them.
What is a good rod for crankbaits?
7 Best Crankbait Rods 2022
- St. Croix Rods Legend Glass Rod.
- St. Croix Rods Mojo Bass Glass Casting Rod.
- G. Loomis E6X Inshore Rod.
- Shimano SLX Baitcasting Rods. Best Rod for Beginners.
- Ugly Stik GX2 Fishing Rods.
- Abu Garcia IKE Signature Power Casting Rod.
- Dobyns Rod Fury Series 6’6” Casting Rod.
- Power.
Do walleye stay deep or shallow?
Walleye depth movement over the course of each day
At noon on a bright sunlit winter day, walleye are usually always found in the deeper basins around 30-40 feet. But as the sun starts to set, they move into more shallow water to hunt their prey in waters that are 10-25 feet deep.
What depth do walleye like in summer?
Troll at 1.5 to 2.5 miles per hour to quickly cover a lot of water. In many situations, you’ll be trolling with 60-70 yards of leadcore out, which positions your lure at about 25-35 feet deep.
What kind of bottom Do walleye like?
A deep diving crankbait that drives 10-13 Ft. down is required to reach typical walleye depths, a #8 in Firetiger is my favorite. These should be trolled along expansive Flats and Reefs during the summer months.
Why are walleyes so hard to catch?
You’re cranking weed edges too slowly.
Walleyes relating to weedbeds often school tightly. To find them, quickly work a crankbait along the edges until you get a strike. You can pick that area apart slowly after you find the fish with a fast-moving lure.
What makes a good walleye rod?
When choosing a walleye rod, you have to make sure it’s strong enough to land a large fish while being sensitive enough to allow you to feel their faint bites. The rod must also be powerful enough to set the hook firmly on the small bites, sinking the hook deep to ensure the fish doesn’t wriggle it out.
How do I choose gear ratio?
The conventional procedure for selecting gear ratios is to pick ratios that run the engine rpm to redline at the end of the medium and longest straights, and pick the lower gear ratios to minimize the rev drop at each shift. This method minimizes the number of shifts per lap.
Contents