Green Marine hydraulic fluid.
Power-Pole has developed Green Marine hydraulic fluid to provide the performance of a petroleum product without the harmful effects. This ISO-32 fluid is ideal for use in Power-Pole systems, trim tabs, jack plates, tilt and trim rams, hatch lifters and more.
Can you use transmission fluid in a Power-Pole?
It’s a hydraulic system, ATF will work just fine.
Can you use power steering fluid in a Power-Pole?
For best results, Green Marine ISO 32 or any similar ISO 32 fluid is recommended. We strongly suggest to NOT use hydraulic steering fluid. There are added detergents that can harm the pump over time. For best results, Green Marine ISO 32 or any similar ISO 32 fluid is recommended.
How much fluid does a Power-Pole hold?
Power Pole Green Marine ISO-32 Hydraulic Fluid – 32oz. Quart | PartsVu.
How do you bleed air from a Power-Pole line?
Cycling the power pole up and down will bleed it. “Using the control raise and lower the Power-Pole several times to prime the system.
Are Power-Pole remotes waterproof?
The Power Pole CM2 Remote Control Transmitter Fob with C-Monster 2.0 allows you to enjoy wireless control from anywhere on your boat. Included with a floating lanyard, the Power-Pole CM2 Remote Control Transmitter Fob features double-click for auto-up/down and it’s completely waterproof.
What is the average lifespan of a telephone pole?
Many utility poles are several decades old
Most power poles are much older than their useful life expectancy, which is likely somewhere around 50 to 60 years. But some of them are much older. Metal and concrete poles can last much longer than wood, but eventually all utility poles need to be replaced.
How long does it take to put a new Power-Pole up?
The average pole replacement could take up to 3-4 hours under favorable conditions with no mitigating circumstances – or longer if unforeseen circumstances slow the crew down.
What wood is used for power lines?
For Tree Farmers, utility poles have the potential to provide an excellent return on investment. Southern yellow pines and Douglas fir are the most popular trees due to their size, but Northeastern red pine, Western red cedar and other softwoods that grow tall and straight are also used.
How do you prime a power pole pump?
STEP 1 Connect power to the HPU. STEP 2 Manually place the Power-Pole Anchor in the deployed position. STEP 3 Using the Wireless Dash Switch set to SLOW speed, hold the DOWN button until the RED LED on the dash switch stops flashing and the pump stops running. (Approximately 20 sec.)
How deep does a Power-Pole go?
about 6 ft
The standard utility pole in the United States is about 40 ft (12 m) long and is buried about 6 ft (2 m) in the ground. However, poles can reach heights of 120 ft (37 m) or more to satisfy clearance requirements.
How strong is the Power-Pole?
More precisely, if the distance between Earth and the Moon in Dragon Ball is meant to reflect the same distance in reality, this means the Power Pole is capable of extending outward for at least 363,300 km (225,744 miles), or roughly 28 times the diameter of the Earth.
How do you change the battery in a power pole remote?
IMPORTANT: Make sure battery replacement is done in a dry location. STEP 1: Remove Key Fob Cover using a Flat-Tip screwdriver. FIG 1 STEP 2: Remove Switch Membrane and Circuit Board from the base FIG 2 STEP 3: Remove battery from holder and replace with a CR2032 3v Lithium Coin Battery. STEP 4: Reassemble Key Fob.
Where is serial number on power pole?
The serial number is located on the bottom of the unit housing next to where the electrical cables connect to the main unit.
How deep is a telephone pole buried?
6 feet
The typical utility pole runs about 40 feet in length, of which 6 feet is buried in the ground. In urban environments they are commonly spaced about 125 feet apart, while in rural areas the distance is more like 300 feet.
What happens if you touch a telephone pole?
A Telephone pole/power pole, wood type is considered a 40% ground. If one of the cables you touch is hot(powered) yes you could be electrocuted. Even then if not electrocuted, you would likely fall and a fall from over 20 ft, can be lethal.
How long does a wooden power pole last?
Wood poles offer an opportunity for atmospheric carbon sequestration not provided by other materials. An Electric Power Research Institute study suggested that wood poles lasted 50 years. Most utilities assume that their poles provide 30 to 40 years of service life.
What causes power pole fires?
Cracks or lightning damage may cause an insulator to fail and cause a pole fire. Dirt and grime can build up on the insulators. Moisture in the air from humid weather, dense fog, light rain, or light, wet snow combines with the dirt to allow an electrical short circuit, which can cause a fire.
Why do they replace power poles?
Typically, a standard wooden distribution pole is expected to last more than 50 years. Occasionally, poles need to be replaced for other reasons besides decay and old age. Weather disasters, power line relocation, or upgrades and car crashes are potential causes for immediate replacement.
How do you replace an electric pole?
Visit your nearest electricity Dept. Office, put up your application, they will make a survey, estimate & you have to pay the estimate cost for shifting then they will shift the pole.
What tree is telephone pole?
Poles are typically made from three species: Douglas Fir, Western Red Cedar and Southern Pine. Logs that have the potential to become wood poles are selected in the forest, often while the trees are still standing.
Contents