What is the round middle button for on a Pico remote? This is a favorite buttonused to recall a preset level for any light the Pico is controlling.To change the favorite level simply adjust the dimmers to your desired level, then press and hold the favorite button until the LED lights on the dimmers blink twice.
Can a Pico remote control multiple switches?
The Pico remote can be paired to more then one dimmer/switch in the app.Keep in mind that if the Pico remote is paired to multiple devices it will control them all at once with no way to separate control individually.
How long does a Pico switch last?
You can also pair a number of other Pico remotes to the same Caseta switch. The Lithium battery inside the Pico should last up to 10 years before you need to replace it which really takes this device to the next level.
Are pico remotes waterproof?
And it appears both rugged and waterproof (rated IP65.)
How long do Pico remotes last?
10 years
Was this FAQ helpful? How long does the Pico remote battery last? The CR2032 coin cell lithium battery in the Pico remote will last for 10 years.
How many lights can Caseta control?
Caseta has a limit of 75 devices.
How do you reset a Pico?
Pico Wireless Controller 3rd Generation (PJ2-)
Step 1: Quickly triple tap and hold the bottom button on the Pico control. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for six seconds. The Pico control has now been returned to Factory Default Settings.
How many devices can a Pico remote control?
Thank you for your post! Pico Controls (or other One-Way devices) can transmit to any number of devices with-in the 30ft RF Range. As long as your 18 PowPaks are within 30ft, the Pico should be able to pair to all 18. Hope this helps!
Does Caseta work without Internet?
Yes, Lutron Caseta does work without the internet. You will need an internet connection for your initial setup, but after that the Lutron Caseta only requires that its bridge maintains connection to the power supply in order for the Lutron Caseta to function.
Do I need a bridge for Caseta?
A bridge is required if you wish to monitor or operate your Cas?ta products via a smart device or to integrate your system with other connected products such as smart speakers and thermostats. It is also required to create scenes or utilize timeclock scheduling of daily events. See key features listed below.
How is Pico remote powered?
A Pico is a battery-powered, RF remote that communicates with other Lutron wireless devices, including dimmers, switches, and shades, as well as with fans and audio integrated into a Lutron system.The Pico is battery- powered, with an industry-leading 10-year battery life.
How do I set my favorite Pico remote?
The favorite button is programmed locally from the Pico remote and not from the Lutron App. Adjust your dimmers levels to the scene you wish to create, then press and hold the favorite button on the Pico for 6 seconds. The dimmers’ LED indicators will flash to confirm the favorite scene has been saved.
Does Lutron Caseta use Z Wave?
Lutron Caseta isn’t compatible with Z-Wave or ZigBee smart hubs because it operates on a different radio frequency. Instead, it uses its own mesh network protocol to connect to a dedicated hub.
What protocol does Caseta use?
Lutron Cas?ta uses the Clear Connect RF communications protocol. This uses an entirely different frequency (434 MHz) from both Wi-Fi and 2.4 Gigahertz alternatives like ZigBee.
Does Maestro work with Caseta?
The Maestro and Caseta are not compatible. All you need to do on the pico wiring is just to tie the 3 wires together. Very easy. Lutron has pretty good instructions on what to do.
Can one pico remote control multiple dimmers?
One Pico remote can be used to control multiple dimmers. The On and Off buttons and the Raise and Lower buttons then control all dimmers connected to the Pico. For example, if you hit the Raise button, all lights get brighter.
Can you have 2 Caseta bridges?
in a larger home, can and should multiple caseta smart bridge pros be used? Multiple bridges could be used in the same house, but there are some unfavorable situations if you do this: 1. You would need to have a separate email address for each one.
Does Caseta work with Alexa?
Enable the Lutron Caseta skill in the Amazon Alexa app, then say Alexa, discover my devices. Install your Cas?ta system, connect it to your Wi-Fi router, and download the Lutron App. , Cas?ta and Lutron are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries.
How do I remove Pico remote from Caseta?
No hub, just the Caseta dimmers and remotes. To un-pair a previously paired Picotap the OFF buttonon the Pico three times, on the third tap hold for 6 seconds and then tap three more times. This will remove all dimmers/switches it was previously paired with.
How do you reset Pico dimmer?
You may have to factory reset them first. To do so, just press the “on” button 3 times, holding on the third press until the unit begins to blink. Then release and press on the “on” button 3 more times. No need to hold this time.
How do you change the battery in a Pico remote?
1. Remove the battery holder screw and slide the battery holder out of the back of the Pico wireless control. 2. Remove existing battery and replace with a new CR 2032 battery, positive (+) side down.
Contents