Three clicks of the power button scroll between the three firing modes (P for manual, AUTO for draw-activated and P&A for both). Press + or to adjust the wattage. Pressing + and together enters the PUFF interface.
What does A and P mean on drag vape?
P &A. Double Ignition mode (press buttons or adopt automatic mode) Support Vaping in Auto-mode while screen locked [Drag S]
How do I change the mode on Voopoo?
Changing modes: Tap the fire button three times to change from ‘RBA’ to ‘smart’ modes. The DRAG S also lets you change between drag and button tap firing. Locking & unlocking the device: Hold the up button and power button at the same time.
Why did my Voopoo turn blue?
VooPoo DRAG X Screen
This is also indicated by the colour of the screen, Blue = RBA and Red = Smart. The top left is a battery level indicator with the locked/unlocked indicator just below it. In the center is the current wattage setting, which is just above the resistance and voltage reading.
What does SS mean on Voopoo drag?
Wattage/Voltage (Power Mode)
Appropriate Wire Materials: Kanthal, Stainless Steel (SS), NiChrome (NiCr) Wattage and Voltage Mode, also referred to as Power Mode, is the most common mod setting for vapers because of its simplicity and effectiveness.
What temp should my VooPoo drag be?
Temperature control adjustable range : 200-600 F / 100-315C – When the temperature setting is at 1000, keep pressing “-“, it will turn to be 600 F; – When the temperature setting is at 200 F, keep pressing -, it will turn to be 315°C. c).
Why does my VooPoo drag leak?
Over heating the device can cause the e-liquid to expand pushing it out through the coil and out the mouthpiece, causing it to leak. Temperatures raising expand the size of the molecules of the e-liquid, and if your tank is full to begin with, your e-liquid will have no where to go but to leak out of the pod.
What wattage should I vape at?
It is not surprising, thus, to find most vapers, advanced users included, tend to stick in the 50-75 watt level for their daily vaping, only bumping it up when they want to pull some tricks or try out something new. You will find many mid-range personal vaporisers built for use at this wattage level.
How long do Voopoo PNP coils last?
between one to two weeks
A new coil should last between one to two weeks. However, most e-liquids leave a thin film of residue when they are vaporized.
What is RBA mode?
RBA mode allows you to build your own coils and wick them exactly how you want, it provides a fresher and more clear taste compared to the OCC coils. RBA mode is not for everyone and does require you to understand some basic principles such as coil building and how to wick a coil.
Why is my Voopoo Argus leaking?
A) Over Filling: Overfilling your tank is the most likely reason for it to leak. Be sure to never fill your tank beyond the max capacity of the tank as it will leak out the top when you replace your coil. When in doubt, fill your device to about 90% capacity.
Why does my Voopoo Vinci taste burnt?
If your VOOPOO VINCI tastes burnt when you take a draw, there are a number of possible reasons: A) Not enough e-liquid in pod: Check and make sure that the pod is filled with e-liquid.Try waiting at least 15-30 seconds between drags to give the e-liquid time to re-saturate your coil.
Why does my Voopoo taste burnt?
Burnt hits are the result of powering an atomizer when there is no liquid or not enough on the wicks. Without liquid to vaporize, the coils start burning the wick, and the user essentially inhales burnt cotton.
What does TC NI mean?
First Time Temperature Control Setup:
Depending on your vaporizer, it may have a single TC Vape Mode that supports both Nickel (Ni) and Titanium (Ti) coils, or it may have a specific Temperature Control Mode that must be set to support either Nickel (Ni) or Titanium (Ti) coils individually.
What does TC TI mean?
TCTI
| Acronym | Definition |
|---|---|
| TCTI | Tashkent Chemical Technological Institute (est. 1991; Uzbekistan) |
| TCTI | Texas Computer Training Institute |
| TCTI | The Counseling Team International (San Bernardino, CA) |
| TCTI | Industry Technical Instruction |
What does VPC mean on a vape?
Variable Power Curve (VPC) is an advanced function or mode option on some mods. This mode enables the user to customize different power levels (wattage) in set increments, providing a power curve over a puff duration (time). VPC was first introduced about 3 years ago and was only found on a handful of high-end mods.
How do you use temp control on Voopoo drag?
Under Customization Mode, Press fire button 3 times continuously, 4 kinds of Customization Modes can be switched sequentially: Stable Power (W) Mode, Temperature Control Mode: TC-SS316/TC-Ni200/TC-Ti. a. Press up and down button, Mode Ml to MS can be sequentially switched.
What is gene chip Voopoo?
As The Chip
VOOPOO GENE Tech platform devotes to developing the most innovative technology of muti-analysis to achieve power control, temperature control, mode switching, power management and other smart functions.
What is R mode on Voopoo drag 2?
R: is RBA mode. This is just regular wattage mode from 5-177W. The screen turns blue. Super: They claim when your resistance is between .
Can you change vape juice without changing coil?
Your vape coil head is likely to outlive your devotion to one particular flavor. However, if you simply empty and refill your tank, e-liquid residue will stick around and cause a lingering flavor.Good news: You don’t have to change coils when changing flavors.
Why does my vape crackle?
The crackling and popping you hear from your e-cig is completely normal. It is caused by your vape coil.As you draw on your e-cig, e-liquid is pulled into your atomizer head. The atomizer head has a coil inside it that heats up as you press your button.
Contents