What Does No Rf Mean On Hive?

No radio frequency.
If your thermostat says ‘No RF’, it means ‘No radio frequency‘ and has lost connection to the Hive Receiver.

Why has my Hive got no signal?

Lift your thermostat off the hooks that hold it against the wall and take your thermostat to the receiver which you will find near to your boiler/hot water tank. Remove the batteries and put them straight back in again. This will turn the thermostat off and on which should help establish a connection to the receiver.

How do I resync my Hive thermostat?

Press and hold down the ‘back arrow’ button and the ‘menu’ button on the thermostat at the same time (these are the bottom left and bottom middle buttons below the silver dial). Keep these buttons held down together until the thermostat display says ‘Welcome, searching’ then remove a battery from the thermostat.

Why is my Hive hub not connecting?

Unplug Hub 360 from the wall socket and reinsert it, wait for the hub to reboot (this can take about 10 minutes) then refresh the Hive app dashboard page in the app. Step 4.You can reconnect the hub to your Wi-Fi by going to your Hive app, tap the Hub 360, Settings, Change Wi-Fi, and follow the in app instructions.

How do I reconnect my Hive to my boiler?

Lift your thermostat off the hooks that hold it against the wall and take your thermostat to the receiver which you will find near to your boiler/hot water tank. Remove the batteries and put them straight back in again. This will turn the thermostat off and on which should help establish a connection to the receiver.

See also  Do You Need A Computer To Use An Ipad?

How long does it take for Hive to reconnect?

This usually takes 5-10 minutes. Once the AMBER light is flashing, the hub is set up and you can move onto installing the receiver. If no lights are displayed immediately after the hub has been turned on, check all cables are connected and the power socket works.

How do I reset my Hive radiator thermostat?

How do I factory reset my Hive Radiator Valve?

  1. Take the batteries out (Please see the User Guide for more info)
  2. Hold down the button below the screen (see the image below)
  3. Put the batteries back in while still holding the button down.
  4. Continue to hold the button down for 5 seconds.

Why is my Hive thermostat not connecting to the app?

Hold the central heating button down on the receiver until the status light flashes pink. Release the button then press and hold it again until the status light is double flashing amber. To reconnect the receiver to your hub, put your hub into pairing mode by selecting ‘Install devices’ in the Hive app menu.

How do I connect Hive hub to New WIFI?

Log into the Hive app and tap your Hive Leak Sensor. When viewing the product page, tap the settings icon on the top right and then tap ‘Change Wi-Fi’. You will be guided through steps to connect to your new network.

How do I connect Hive to new WIFI?

How do I change the Wi-Fi router or network that my Hive View or Hive View Outdoor is connected to?

  1. Head to your Hive mobile app and log in if required using your Hive username and password.
  2. Select the camera you wish to view from the dashboard.
  3. Select the “Settings” icon, and then “Change Wi-Fi”
See also  What Technology Is Used In Hotels?

Does Hive have to be plugged into router?

Our newest hub, Hive Hub 360 connects via Wi-Fi, our other hubs need to be physically connected to your broadband router using a network cable (provided with the hub) to allow you to control your Hive products remotely.

Why is my wireless thermostat not working?

Common issues you will find with a wireless thermostat are application bugs, signal interference, and a faulty wireless relay box. If resetting didn’t fix the communication problems, try addressing these issues first. When things don’t improve, you can narrow it down to faulty hardware.

How do I get my Hive back online?

You can reconnect the hub to your Wi-Fi by going to your Hive app, tap the Hub 360, Settings, Change Wi-Fi, and follow the in-app instructions. Step 6. Go back to ‘Menu’ in the Hive app, tap ‘Manage devices‘ then refresh the page. If the hub is showing as ‘connected’ you’re done!

How do I reconnect my Hive after changing the battery?

Take out the old batteries and replace with fully charged ones – Hive thermostats take four AA batteries. Secure the thermostat back onto the wall mount – it should automatically turn back on and reconnect to the system.

Why is my Hive Radiator Valve not working?

If your Radiator Valve is still showing offline in the app, temporarily take it off the radiator following the steps in the User Guide and take it close to your hub. Then take out one battery from your Radiator Valve and put it in again. Your Radiator Valve will restart. Wait 5 minutes and then refresh the app.

See also  Does Freeview Have Netflix?

How long do Hive Radiator Valve batteries last?

The battery life really depends on how often you wake up the thermostat display – if you’re mainly using the app and rarely touch touch the device should last you at least 12 months. We would always recommend using good quality batteries such as Duracell or Energizer and avoid using rechargeable ones.

How do you recalibrate a Hive Radiator Valve?

While calibrating
Want to speed up the process? There’s a special calibration cycle available in app version 10.15 onwards. To test that your Hive Radiator Valve is working while it calibrates, use the dial on the front to set it to a high temperature. The valve should open immediately.

Can hive be operated manually?

The Hive Active Heating 2 thermostat has been designed to be easy to use.You can use your Hive thermostat to control your heating and hot water manually when at home.

Does hive thermostat work without WiFi?

Yes, your thermostat will continue to function on its pre-set schedule if not connected to WiFi. However, without Internet connection, you will not be able to control your thermostat remotely, but instead you will have to adjust the configuration from the thermostat itself.

Can you manually override hive?

Hive Active Plug – Your plug will continue to work. Until your broadband connection is restored you can control your plug, whether it is on or off, manually from the plug itself.Until your broadband connection is restored you can control your light, whether it is on or off, manually from the light switch itself.

Contents

This entry was posted in Smart Home by Alyssa Stevenson. Bookmark the permalink.
Avatar photo

About Alyssa Stevenson

Alyssa Stevenson loves smart devices. She is an expert in the field and has spent years researching and developing new ways to make our lives easier. Alyssa has also been a vocal advocate for the responsible use of technology, working to ensure that our devices don't overtake our lives.