What Does It Mean When The Thermostat Says Occupied?

Setback thermostats, also called occupied/unoccupied controls, automatically lower (or increase in summer) temperatures when the building is unoccupied, thereby reducing heating or cooling needs.

How long do ecobee sensors stay occupied?

When you leave that room, the sensor will remain occupied for 30 minutes. This means that if you are moving around the house, the thermostat won’t be continually turning on and off. After 30 minutes of no movement, the sensor will become unoccupied. It will stay unoccupied until movement is detected again.

How does ecobee know if a room is occupied?

The sensors include a motion detector to tell the ecobee which parts of your house are active.The motion sensors are passive infrared motion sensors. This means they use the natural infrared radiation given off by all objects as a means of detecting motion, and therefore work regardless of light or dark.

How do I make my ecobee sensor occupied?

Tap and hold your finger on the number to the right and drag it to set the desired indoor temperature that you want your thermostat set at when you’re not at home. Then hit “Save” in the bottom-right corner. Do the same thing for the heating temperature if you have the heat running.

Can a smart thermostat detect room occupancy?

The room sensors detect the amount of people present.Most smart thermostats only measure the temperature in the room in which they are located. Room Sensors use their built-in temperature sensors to tell ecobee4 which rooms are occupied and which rooms are not.

How does occupancy sensor work?

Occupancy sensors that rely on ultrasonic technology send high frequency sound waves (that humans can’t hear) into an area and measure reflection patterns. When the pattern changes, the sensor considers the space occupied.

How do I know if my ecobee sensor is working?

1) Gently pull the plastic tab on the back of the sensor. 2) Look for a message on your ecobee’s screen. The 4-digit ID should match the 4-digit code on the back of your sensor. Tap Pair now to confirm pairing.

How accurate is ecobee temperature?

– 1.0F
The ecobee temperature sensor has a +/- 1.0F accuracy and is programmed to provide readings every 15 seconds. It will use the previous two values and average them into the current reading.

Which saves more money ecobee or nest?

In honesty, the difference in savings isn’t that big. Nest claims to save you 10-12% on heating and 15% on cooling over time. Ecobee say their devices will save you up to 23% on all your energy bills.

Does ecobee know when I’m home?

By using the occupancy information reported by your ecobee thermostat’s built-in occupancy sensor* and the Room Sensors paired with your ecobee, Smart Home/Away tracks your household’s comings and goings to set the temperature for comfort or savings.

Why is my ecobee thermostat not working?

Open the panel on your furnace to expose the control panel where your thermostat wires are connected. Most systems have a purple 3 or an orange 5 amp fuse on the board—check this fuse to ensure that it’s intact. A blown fuse will have to be replaced. Once a blown fuse is replaced, the ecobee should power back on.

How do I open my ecobee thermostat?

To remove the ecobee backplate, carefully remove your thermostat from the backplate by putting your thumb and index finger on the backplate. Then, pull against the ecobee3 lite. Remove the screws from the backplate to remove it from the wall.

Why does Nest say away when im home?

Your phone’s location doesn’t override your Nest product sensors, so if your Nest thermostat or Protect senses activity, your home will switch out of Away to Home even if your phone is not at home.

How does Nest occupancy sensor work?

Nest Learning Thermostat and Nest Thermostat E: An occupancy sensor detects if someone is in the room. Your thermostat also notes if you manually adjust the temperature on the device.Nest Thermostat also notes if you manually adjust the temperature on the device.

How long before Nest turns away?

This is to give you some time to leave. After 5 minutes, if any of your Nest products notice you’re at home, they’ll automatically switch back to Home mode.

How long do occupancy sensors stay on?

A choice of four delayed-OFF time settings is available: 30-seconds (for walk test purposes only), 5 minutes, 15 minutes, and 30 minutes. Range The range can be adjusted from 100% to 36% of the total coverage area.

Where are occupancy sensors required?

Occupancy sensors per C405. 2.2. 2 are required in all classrooms, conference/meeting rooms, employee lunch and break rooms, private offices, restrooms, storage rooms, janitorial closets, and other spaces 300 sq ft or smaller enclosed by ceiling height partitions.

How do I reset my Ecobee thermostat?

How to Factory Reset an ecobee Smart Thermostat

1. From the Home screen, press Menu.
2. Select Settings.
3. Go to Reset.
4. Choose Reset All Settings then confirm your selection by pressing Yes.
5. Choose the reset option that suits your needs:
6. The ecobee thermostat will be reset to factory defaults.

How do I reset my ecobee sensor?

1 Factory Reset

1. Remove the circular backing from the back of the sensor.
2. Remove the battery from the battery slot.
3. Gently lift the prongs in the middle of the battery slot with your index fingernail.
4. Place the battery back into the battery slot with the positive side facing down for 30 seconds.

Is there a battery in the Ecobee thermostat?

The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.

What is Stage 1 cooling?

A single stage heating or cooling system means your furnace or air conditioner has only one level of heat or cold output. Single stage thermostats are used to control single stage HVAC systems—thus, if you have a single stage heating and cooling system, your home needs a single stage thermostat.