A common cause of the Base Station flashing a blue light revolves around communication with the SimpliSafe dispatch center. SimpliSafe offers the ability to dispatch emergency services if an alarm is triggered. If the system is unable to establish a connection to dispatch, the Base Station will flash blue.
What does it mean when SimpliSafe is blue?
You’ve got the Gen 3 SimpliSafe system.System is Unarmed. Blue. System is Armed, Home or Away.
Why is SimpliSafe base blue?
You’ve got the Original SimpliSafe system.
What do the lights on my Original SimpliSafe Base Station mean?
| LED Status | What does it mean? |
|---|---|
| Blinking Blue | There is a message for you on your keypad regarding an error or recent event |
| Solid Blue | System is armed or in Test Mode |
How do you stop SimpliSafe from flashing?
Why my Simplisafe Base Station is Blinking Blue?
- Disconnect your Simplisafe Base Station from the power socket, if connected.
- Now, remove the batteries from the Base Station device.
- To do it, turn the Base Station upside down.
- Open the battery door using a screwdriver.
- Take the batteries out of its slot.
Why is SimpliSafe camera blinking?
If your camera has a flashing white light, it does not read the QR code that allows it to connect to WiFi. During set up mode, the camera waits to read a QR code which tells it the WiFi name and password. The camera light will change to solid white when the QR code has been successfully read.
Can SimpliSafe be hacked?
SimpliSafe: Unlike ADT, hacks aren’t uncommon for the newer security company SimpliSafe. Rather, in 2019 a Youtube account named LockPickingLawyer discovered that they could hack the SimpliSafe security system with a $2 dongle from Amazon when physically near the system.
How do I reset my SimpliSafe base?
How to Reset SimpliSafe Base Station
- Unplug the Base Station from its power source.
- Remove the battery from the device.
- Replace the battery, and re-plug your device back in.
- After a full power cycle, the device should be reset.
How do I reset my SimpliSafe sensor?
How to Reset My SimpliSafe Base Station
- Unplug your base station.
- Remove the battery cover at the bottom of the device using a screwdriver.
- Remove the battery for 10 to 15 seconds before putting the battery back in.
- Put the cover back on the device.
Why is my SimpliSafe base station not working?
Simply unplug the power cord to your Base Station and, while unplugged, remove a battery (you’ll need a screwdriver to get to the battery compartment). Wait a few seconds, and then put the battery back in and plug in the power cord – the Base Station will then come back on.
How do you know if SimpliSafe is armed?
Home and Away both mean the system is armed, but different sensors are active in each. You can change the sensor settings for each mode at any time via the SimpliSafe app, but the default settings are below.
HOME MODE.
| Entry Sensor | Active |
|---|---|
| Camera (motion detection) | Off (privacy shutter still opens for alarm trigger events) |
Why does the SimpliSafe keypad randomly light up?
The company gave us this statement: We have designed Nest Secure with issues such as jamming in mind. For example, if we detect jamming while the system isn’t armed, the Info button will light up to alert the user and they will not be able to arm the system until it is resolved.
What does a blue light mean on a camera?
A solid blue light indicates that the camera has been paired with an account and is connected to your router. A blinking blue light indicates that the camera has lost connection to the Internet and is trying to reconnect. A red light indicates that the camera has been factory reset and is in pairing mode.
What is the blue light on SimpliSafe camera?
On the SimpliCam, when the blue light flashes, that means the camera is recording. If the blue light isn’t flashing, that means the camera is on stand-by. A blinking red light means the camera can’t connect to Wi-Fi and a yellow flashing light means that the camera can’t connect to the SimpliSafe’s servers.
Are SimpliSafe cameras always recording?
Record and Save video for peace of mind
With an Interactive monitoring plan subscription, the camera will automatically record during a number of events, ensuring you know what caused them. When triggered by an alarm, the camera will record video for five minuteslonger if motion is detected during the alarm.
Is SimpliSafe easily hacked 2021?
SimpliSafe is not easily hacked
While it’s technically possible to hack into anything, calling it easy is extremely misleading.
Is SimpliSafe bad?
Overall, Best Company has received over 180 customer reviews for SimpliSafe and the average customer rating is 3.5 out of 5 not bad, but not the best rating in comparison to the top home security companies.
Does SimpliSafe deter burglars?
SimpliSafe uses cellular to signal the monitoring service for help, so there are no phone lines for burglars to cut. Police will arrive no matter what. Plus it has a loud 85dB siren in the base station, with the option for a second 105dB siren, which will drive off most burglars.
How do I reconnect my SimpliSafe base station?
How do I transfer service to a new Base Station?
- Open the SimpliSafe mobile app.
- Open the app menu by tapping the three-bar icon (?)
- Choose “activate new service”
- Choose “transfer monitoring”
What does a red light mean on my SimpliSafe base station?
The red LED indicates the alarm you have set for your simplisafe base station. The pulse will last for 1-2 minutes before the LED turns solid red. You can simply turn off the alarm. Wait for the light to go, and the LED on base station will be remain solid.
Can you reset SimpliSafe base station?
Here’s how to reset your Base Station: Remove the power adapter. Using a Phillips-head screwdriver, remove the screw holding the battery cover in place, and then remove the battery cover. Remove one of the batteries from the Base Station and wait for about 10-15 seconds.
Do SimpliSafe sensors go bad?
Sensors in our latest SimpliSafe system will issue errors when they fail to check in with the Base Station. This issue is generally caused by one of the following: The device was programmed when your system was ordered but was never installed.
Contents