What are Keys & keyways? A key and the keyways make up a Keyed joint to secure the hub and the shaft to prevent relative movement between a power transmitting shaft and an attached component. For example, Gear drives, Pulleys or Sprockets are connected securely using keys to the power transmitting shaft (Figure 1).
What is the use of keyway shaft?
Shaft keyway and keys are used to transmit torque from shafts to mechanical transmission elements such as gears, pulleys, etc. using a keyed joint. They can be made using either a standard stock material such as key stock or custom machined to suit the application.
What is a keyway key?
Keyway is the term for the shape of the interface between a lock and its key. It’s most clearly seen when you imagine the cross section of the blade of a key.The keyway is what prevents you from even beginning to push the wrong key into the wrong slot.
What is a keyway in concrete?
a groove in a shaft, the hub of a wheel, etc., for receiving part of a key holding it to another part. a slot in a lock for receiving and guiding the key. (in poured-concrete construction) a longitudinal groove in a footing, or in a pour that has set, providing a key for newly poured concrete.
What is saddle key?
Definition of saddle key
: a key for securing a member to a machine shaft that fits into a keyway in the secured member and is concave to grip the shaft by friction compare flat key, sunk key.
What is a feather key?
Definition of feather key
in machinery. : a sunk key without taper that is permanently fixed in one of the connected pieces and that is a sliding fit in a keyway in the other so as to permit relative longitudinal motion. called also spline.
What are the different keyways?
There are many types of keyways, but most homes have locks with one of two of the most common keyways KW1 and SC1. The SC stands for Schlage, and the KW stands for Kwikset two common lock manufacturers. Stone Harbor door locks are available with both of these keyways.
Do bump keys work?
When executed correctly, lock bumping is effective in nearly 90 percent of all cylinder-type locks produced today. Perhaps one of the most disconcerting aspects of lock bumping is that it can often go undetected, which means that your home can be broken into without any signs of forced entry.
What keyway does Yale use?
Yale KeyMark® with patented SecurityLeg® keyway.
What is a keyway and how is it formed?
Keyways are formed by milling groves into the key blade creating a final shape. (Watch: Video of Key Milling Tool). There can be one or more milling groves in a key blade. A key blank can be cut into any number of keyways, but the correct tools are required to achieve more complex keyways.
What is a key in construction?
The shear key is a part of the structural element mostly used to make the structure stable against the lateral loads. Depending on the type of construction and nature of the loading, the application of shear is different. Mostly the shear keys are constructed between two structural elements.
How deep should footings be?
All footings should be a minimum of 150mm (6″) in depth, with the bottom 350 – 400mm (14-16″) below ground level on most soils. For clay soil however, thicker and deeper footings should be used.
What is a tangent key?
Tangent Keys
Tangent keys are used in heavy-duty equipment.These pair of keys are placed right angles to each other and tangent to the surface of the shaft as shown in the fig. each key will withstand the torsion in one direction only.
What is Kennedy key?
The Kennedy key consists of two square keys. The hub is bored off the centre and the two keys force the hub and the shaft to a concentric position. Kennedy key is used for heavy duty applications.
What are sunk keys?
Definition of sunk key
: a key that fits into keyways in both the shaft and the secured member in machinery compare saddle key.
What are the type of keys?
There are broadly seven types of keys in DBMS:
- Primary Key.
- Candidate Key.
- Super Key.
- Foreign Key.
- Composite Key.
- Alternate Key.
- Unique Key.
What is the difference between a saddle key and a sunk key?
Compared to sunk keys, saddle keys are not sunk into the shaft and hub instead they are only sunk into the hub. They either sit on a flat or circumference of the shaft. Power transmission is achieved through friction between the shaft and the key.
What types of stress are developed in the key?
Keys are used as temporary fastenings and are subjected to considerable crushing and shearing stresses. A keyway is a slot or recess in a shaft and hub of the pulley to accommodate a key.
What keyway does Schlage use?
Schlage uses CNC milling complex keyway shapes to mechanically prevent some non-OEM keys from entering or operating a lock. Schlage keyway types including Primus/Primus XP, Everest, Obverse, Reverse, Numbered or Paracentric, and Quad.
What keyway does Kwikset use?
SC1 Keyway
The new SC1 Keyway, compatible with most Kwikset® locks, brings significant benefits to both the consumer and B2B markets, which includes security dealers as well as professionals who purchase and utilize a large volume of mechanical locks (builders, remodelers, property owners and managers).
Can you duplicate a KW1 key?
Kiosks. With the Minute Key self-service kiosk, you can easily duplicate and copy home, business, and auto keys.
Contents