Sometimes labeled on the cable as P7, the Berg connector is a power connection developed by Berg Electronics. It is used with computer power supplies that connect to floppy disk drives, front panel lights, and reset or turbo buttons.
What is the use of Berg connector?
A Berg connector is a connector used in computers to connect electrical circuits. It was manufactured by Berg Electronics Corporation before being acquired as a division of Framatome Connectors International. Berg connectors were widely used in the late 80s and early 90s, especially in computer power supplies.
What is Berg mini Molex connector used to )?
A Berg connector is a device used to join electrical circuits in computers. The best known Berg connector is used to connect the floppy drive to the power supply unit. This type of computer hardware can also be used to connect the front panel lights, the turbo switch, or the reset button to the motherboard.
What does a Molex connector power?
Certain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD drive, video card, some older hard drive models, and more. Compatible connectors are available from many manufacturers, not just Molex and AMP.
How much power does a floppy drive use?
about one half Watt
The floppy drive consumes about one half Watt of power, so the savings are small. But big savings can come from many small cuts, so the device was left unplugged.
What is the function of 20 pin Molex ATX power connector?
An ATX style connector is a replacement for the older P8 and P9 AT style connector. It is one of the largest connectors inside a computer. It connects a power supply to an ATX style motherboard. As shown in the picture, the 20-pin cable is a multi-color cable and may be labeled as P1.
Is replacing a power supply hard?
Installing a power supply is a surprisingly easy process. It’s much more straightforward than actually choosing the best power supply for your PC. We’ll show you how to safely remove a PSU from your current computer, then walk you through the steps of installing your new power supply.
What is the function of 24 pin power connector?
A 24-pin power supply adds an extra line each of 3.3 volts, 5 volts, and 12 volts, as well as an additional ground. These extra lines are used to satisfy the needs of newer technologies and more power-hungry peripherals. They also replace older 12 volt auxiliary connectors found on some 20-pin motherboards.
What is the 24 pin connector for?
The ATX 24-pin power supply connector is the standard motherboard power connector in computers today. The connector itself is a Molex 39-01-2240 connector, often called a Molex Mini-fit Jr.
What is an AUX power cable?
The auxiliary connector is a four or six wire power supply connector that connects to the motherboard. This connector provides additional power to the computer processor and other power hungry devices like a video.
Is Molex 5V or 12V?
All the other plugs coming out of the power supply—called Molex connectors—are for drives, and they provide +12V (yellow) and +5V (red) power, as well as two ground wires (black).
Is Molex better than SATA?
Technically Molex can carry much more power than the SATA power connector. Molex has 2 power pins (one 5V and on 12V pin), each can deliver 11Amps for a total of 22Amps. The other 2 pins are ground wires… SATA power connectors has a total of 15 pins of which 9 are power pins (3 x 3.3V, 3 x 5V, 3 x 12V).
Can you use SATA to power fans?
My motherboard does not have enough fan headers for all the fans in my case, so this was an easy way to power them via a SATA power connection. The cable is pretty simple and worked as advertised without any problems.
Do floppy drives need power?
Floppy drives use a 4-pin Berg connector for power, which includes +5V, two ground wires, and +12V (pins 1-4, respectively). For just driving the read head stepper motor, the drives only need +5V and ground.
What is the use and function of 4 pin Berg connector?
the four-pin polarized Berg connectors used to connect 3½-inch floppy disk drive units to the power supply unit, usually referred to as simply a “floppy power connector”, but often also referred to as LP4. This connector has a 2.50 mm (0.098 in) pitch (not 2.54 mm).
What power supply does iBUYPOWER use?
Black Friday Month Sale Intel Z690 Streamer
| Case | iBUYPOWER Slate 4 MR |
|---|---|
| CPU | Intel® Core™ i7-12700KF |
| GPU | NVIDIA GeForce RTX 3060 Ti |
| Memory | 16GB DDR4-3600 T-FORCE RGB RAM |
| Power Supply | 600 Watt – 80 PLUS Gold Certified |
How do I get a replacement power supply?
Find out what kind of power supply you’re replacing.
The easiest way to figure out if you have an ATX power supply is to do a quick Google search for the unit’s model number – most manufacturers and retailers will state explicitly on the power supply’s webpage whether or not it follows ATX specification.
Are power supplies universal?
The term universal implies that a power supply can be used universally throughout the world. All of the countries on the globe have their own power generation facilities. Those facilities distribute their power at different voltages and frequencies.
What is the function of a 20 pin or 24 pin slotted connector?
The 20/24 pin ATX provides primary power to the system. It powers all directly connected components and SMDs, and provides power to PCI-E devices.
What is 20 24 pin ATX connector?
The 24 pin motherboard connector is actually just the 20 pin connector with 4 extra pins added on the end. The original 20 pins were unchanged. The extra 4 pins are not separate rails. They’re just extra lines to provide more current to the same rails.
Are all 24 pin connectors the same?
The 24 pin cable is just the 20 pin cable with 4 extra wires added to the end to provide extra current. If your power supply main power cable and motherboard main power connector both have the same number of pins then they’ll (of course) fit together just fine.
Contents