What Do You Do When Your Blinds Are Not Wide Enough?

Blinds Too Wide? Try An Outside Mount. The easiest solution for blinds that are too wide is to install them as an outside mount instead of an inside mount. The included installation brackets are compatible with either mounting option, so this is a quick fix.

Can you adjust blinds width?

You can either measure your window and cut the valance at 1/8″ under the width, or just simply put the valance up to the window and make a mark 1/8″ shorter.

How do you extend window blinds?

Cut bamboo slats, threads and cords with scissors from the bottom of a second blind that is the same width. Add 3 to 4 inches above the length you need. Remove the slats from the cording above the length you need so you can tie the slats and cords of the bottom of the existing shade to the top of the new portion.

Do blinds have to fit exactly?

Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening.If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.

What is a light gap blocker?

Light blocking strips (or Light Blockers) are an adhesive vinyl strip that can be attached to your window frame and will obstruct those pesky gaps. These are typically used in tandem with blackout window treatments but can be used to simply reduce the light coming in from the sides.

How do you cover a gap between curtains and windows?

You can close a troublesome gap between curtains and walls by installing a wrap around curtain rod and hanging curtains that are longer and wider than the window they cover. You can attach the sides of your curtains to the walls adjacent to a window using tape, pins, or Velcro strips.

Can you cut roller blinds to size?

Roller blinds are simple and easy to cut to size yourself. You simply need to take the measurements of your windows, compare them against your blinds and cut off the excess material. You Will Need: A pair of sharp scissors.

Can you cut blinds with a miter saw?

Put your blinds in your chop saw (miter saw), make sure you get it lined up exactly where you want it. Remember, when you cut, the saw blade will take away a teeny bit extra, so make sure you’ve got the blade lined up on the outside of your line.Aaaannd cut. You did it!

How wide should blinds be compared to the window?

To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top and the bottom by at least 3″.

How wide should blinds be inside Mount?

Inside-Mounted Vertical Blinds
Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.

What width do blinds come in?

If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.

What is Zebra blinds?

Zebra Shades are a very modern alternative to a horizontal blind. Zebra Shades are Roller shades that allow you to transition between sheer and privacy. The blinds can be adjusted so that the 3″ zebra stripes line up-offering privacy, light control, and insulation.

How do I block a light through a window?

Different Ways on How to Blackout A Window

1. Install an Awning. Many people do not know how to blackout a window.
2. Get a Mesh Liner.
3. Cover Your Window in Aluminum Foil.
4. Place Privacy Film on the Windows.
5. Treat Your Window with Film.
6. Blackout Shades.
7. Install Cordless Blackout Window Shades.
8. Black Out the Light with Curtain Liners.

How do you make curtains overlap?

Overlapping sheer curtains are graceful, put-together and classic. To achieve this romantic look, lay two curtain panels atop each other. Connect clip curtain rings to your curtain rod (the curtain ring should clip into both curtains).

How do I stop the lights from coming above my curtains?

You can apply a magnetic tape on their sides and on the sides of the window, apply a weather-strip, caulk your windows, or add a valance. The latter is one of the most effective ways for blocking light and beautifying your window space.

How do you adjust the width of Roman blinds?

Remove the end cap (opposite to the sidewinder) on either the left or right hand side. Once removed, mark the header rail with a pencil at the finished width you would like your blind to be. You may notice that there are cords in the way. Simply slide or unscrew them to adjust.

Is it easy to trim a roller blind?

Cutting a roller blind is fairly simple as long as you make the correct measurements. By laying the blind flat and marking out your desired measurements you will be able to ensure your blind is cut to fit your window. When it comes to cutting the blind, you should use sharp scissors for a clean finish.

Can you make blinds smaller?

Wood blinds or faux wood blinds can be cut down a few inches if they are too large to fit the window frame.If you do not feel comfortable cutting the window blinds yourself, you might consider hiring a professional such as a blind manufacturer or a cut down service such as www.relocateblinds.com.

Can vinyl blinds be cut?

If the vanes on a vertical blind are too long they can be trimmed to the correct length. Because the vanes are made from a thin pvc vinyl material they are easy to cut.

Can you cut blinds that are too long?

Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.

Can you restring blinds?

If one or more of the lift strings becomes frayed or breaks, you can remove the broken strings and restring broken blinds strings so your blinds can work like new. Loosen the locking clip and let the blinds down as far as they will go with the remaining working strings.