What Do I Do If My Arlo Camera Is Offline?

To troubleshoot when your Arlo Go camera is offline:

1. Unplug your Arlo Go camera, remove the battery, reinsert the battery, and notice the camera LED behavior when the door is closed.
2. Note the LED behavior after the camera is done starting up:
3. If your camera is still offline, visit Arlo Support to speak with an expert.

Why are my Arlo cameras not connecting?

Make sure that the camera LED is blinking blue while the camera is being discovered. (The Arlo Video Doorbell LED ring blinks white.)If the camera times out, press the sync button again. Make sure that the LED blinks blue for the entirety of the connection process.

How do you restart an Arlo camera?

The Arlo app is available via the Google Play and Apple App stores.

1. From the top menu, tap or click. Settings. (upper-right, to the right of Mode).
2. Tap or click the appropriate camera. Multiple cameras may appear.
3. Tap or click. Restart. . May require scrolling to the bottom.
4. To confirm, tap. Restart. .

How do I reconnect my Arlo camera to the Internet?

To connect your Arlo camera to your 2.4GHz WiFi Router:

1. Launch the Arlo app on iOS or Android.
2. Tap or click Settings > My Devices.
3. Select your Arlo camera.
4. Scroll to the bottom of the Device Settings screen, and tap or click Remove Device.
5. From the Devices screen, tap or click Add New Device, and select your camera.

How do I reconnect my Arlo camera?

Press the Sync button on top of the camera for about two seconds and then release the button. Note: Cameras must be synced one at a time. A blue LED on the camera blinks rapidly to confirm sync. If the LED on the camera blinks amber, the sync is not successful.

What happens if you restart your Arlo camera?

Factory resetting your Arlo wire-free camera returns it to default settings and removes the camera from your account. This means that you must follow the Arlo app setup process to use your camera after a factory reset.

How do I activate my Arlo camera?

To reactivate a camera:
Tap or click Settings > Subscription > Manage Camera Status. Under Inactive Cameras, tap or click and hold the three lines next to the camera that you want to reactivate. Drag the selected camera to the Move camera here field. Your camera is reactivated.

What happens when you restart Arlo camera?

marajose, A camera can be rebooted by opening and closing the battery compartment door. After a reboot, as long as the camera is able to communicate with the base station (within range, no other interference) it will automatically sync back up.

Why is my Arlo not connecting to my phone?

Uninstall/reinstall the app and reboot the phone/tablet. Make sure the phone/tablet is using wifi to the home network, and not cellular. Restart the base. Remove the base and cameras from the account and re-add them.

Why is my Arlo app not working?

If you experience frequent crashes on your Arlo app, try uninstalling the Arlo app and reinstalling it.Running multiple apps take up device resources which can cause apps to perform poorly or crash altogether. If possible, try stopping, or turning off service to other apps that are running if your Arlo app crashes.

How do I reset my Arlo essential spotlight camera?

Follow the instructions in the Arlo app to add your Essential wire-free camera to your account. Press and hold the sync button for about 10-15 seconds. The camera LED flashes amber 3 times. Let go of the sync button after the 3 amber flashes, and the camera factory resets.

Why is my Arlo camera flashing orange?

When a camera is flashing orange, this could mean that the battery level is low.

How do I reconnect my Arlo after a power outage?

Pamws do the following in sequence.

1. Disconnect ethernet from modem.
2. Turnoff Arlo base.
3. Reset modem by power off.
4. After thirty seconds plug Arlo base into modem.
5. Tirn on Arlo base and wait for cycle up.
6. Once Arlo is fully up (1 green light), power on your modem.
7. Sync each camera to the base as normal.

What happens if you unplug Arlo?

If you just unplug it then you will not need to resync. when plugged back in. If you move to another area and take the wifi router with you then again you do not need to resync.

How do you reset Arlo app?

Launch the Arlo app or log in to my.arlo.com. Tap or click Settings > My Devices and select the camera you just reset.