As the load changes, a shunt wound motor runs at a predictable speed. If variable speed is desired, constant speed can be a disadvantage. The lifetime of the motor is usually not improved by brushes.
What is shunt advantages and disadvantages?
There are some advantages of transistor shunt regulator are given below, The transistor shunt regulator has a good efficiency for small load currents. It has ease to reject short circuit. The voltage regulation is good. It has constant DC output voltage.
What is the disadvantage of a shunt wound generator?
Dc motors are unreliable at low-speed operations. Shunt motor is a constant speed motor, it would be disadvantages where it’s necessary to operate under variable speed.For the same current input, its starting torque is not a high as that of a DC series motor.
What is the main disadvantage of a series wound generator?
The series motor has poor speed regulation. When the load speed of the machine increases, the DC shunt motor keeps its constant speed from no load to full load. The dc series motor’s Torque drops sharply when the speed increases.
What are disadvantages of armature?
Disadvantages of Armature Controlled DC Motors
field control: Higher initial costs: The armature control method is often more expensive than the field control method.
What is the main disadvantage of a shunt motor?
As the load changes, a shunt wound motor runs at a predictable speed. If variable speed is desired, constant speed can be a disadvantage. The lifetime of the motor is usually not improved by brushes.
What is shunt and its advantages?
A resistor having a very low value of resistance connected in parallel with other resistor is caused shunt. The range of ammeter reading can be extended by connecting a shunt resistance to it. The shunt is used in the galvanometer for measuring the large current. It is used as diodes also.
What are shunt generators used for?
Applications of Shunt Wound DC Generators
They are used for general lighting. They are used to charge battery because they can be made to give constant output voltage. They are used for giving the excitation to the alternators. They are also used for small power supply (such as a portable generator).
What are the uses of shunt?
shunt is used to convert a galvanometer into ammeter by joined it parallel to the galvanometer. 2. Shunt can also be used in to convert galvanometer into voltmeter by joining it in series with galvanometer.
What are the advantages and disadvantages of a separately excited generator over a self excited generator?
Separately excited DC generators have many advantages over self-excited DC generators. It can operate in stable condition with any field excitation and gives wide range of output voltage. The main disadvantage of these kinds of generators is that it is very expensive of providing a separate excitation source.
Which has stronger torque series motor or shunt motor?
The field flux, then is proportional to armature current.For light loads a series motor produces less toryue for the same arrnature current; for heavy loads it produces more torque than a shunt motor. Series motors are alwaye rigtdly connected to their loads, and never operated without some Ioad.
What is shunt excited generator?
generator is referred to as shunt-excited. It has the advantage of requiring no independent electrical supply. Residual magnetic flux in the iron poles produces a small generated voltage as the machine is brought up to speed. This causes a field current that increases the flux and in turn the generated
How is the voltage in a shunt generator controlled?
As shown in Figure 11A, the output voltage of a shunt generator can be controlled by means of a rheostat inserted in series with the field windings. As the resistance of the field circuit is increased, the field current is reduced; consequently, the generated voltage is also reduced.
What are the disadvantages of armature resistance control?
Drawbacks of armature resistance control method:
A large amount of power is wasted in the external resistance R and hence less efficient. It is restricted to keep the speed below the normal speed of the motor and increase in the speed above normal level is not possible.
What is the major drawback of armature voltage control method?
The main disadvantages of the above method is, the speed up to zero is not possible as it requires a large rheostat in series with the armature which is practically impossible.
What are the disadvantages of supply voltage control method?
Disadvantages of this method is that the smooth speed control is not possible . This method is more costly and less efficient as two different stator winding are required. This method of speed control can only be applied for squirrel cage motor.
What are the disadvantages of direct current?
If we transmit the electricity in the format of direct current within the wires, the main portion of the electricity is already reduced and wasted in the shape of heat that will cause nothing but loss. This is the basic disadvantage of the direct current.
What are the disadvantages of DC electricity?
Disadvantages of DC Transmission:
Due to commutation problem, electric power can’t be produced at High (DC) Voltage. In High Voltage transmission, we cant step-up the level of DC Voltage (As Transformer won’t work on DC). There is a limitation of DC switches and circuit breakers (and they are costly too).
What are the disadvantages of AC motors?
Disadvantages of AC motors
1. The start ability and speed regulation of the AC motor are poor, and it need frequency conversion equipment to adjust the speed; 2. Must be connected to AC power to use, subject to space restrictions.
Is shunt a resistance?
Definition: A resistor having a very low value of resistance such type of resistor is called shunt resistance.The shunt is used in the galvanometer for measuring the large current. It is connected in parallel to the circuit of the galvanometer. The galvanometer is the current sensing devices.
What does a shunt in the brain do?
A shunt is a hollow tube surgically placed in the brain (or occasionally in the spine) to help drain cerebrospinal fluid and redirect it to another location in the body where it can be reabsorbed.
Contents