There are 7 different keyways C,CE,E,EF,F,FG and G. There is a special “P” keyway designed to accept any of the 7 keys and a special key blank designed to be accepted into all 7 keyways, 35-101 L which is made of stainless steel and requires a special machine to cut.
What are the different types of keyways?
Types. There are five main types of keys: sunk, saddle, tangent, round, and spline.
How do I identify my Schlage keyways?
Look at the large end of the key (also called the bow). If the bow has straight sides and a triangle-shaped top (like a house), you probably have a KW1 keyway. If the key is diamond-shaped (narrower at the top and bottom and wide in the middle), you probably have a SC1 keyway.
Are all KW1 keys the same?
There are few differences between these types of keys, but they are not interchangeable. In the end, it comes down to whatever locks were installed on your door when it was installed. Use the following guides to help you determine which type of key you need to order.
What are SC1 keys used for?
The HY-KO Products SC1 Blank Schlage Lock Key is a nickel-plated brass, precision-milled replacement key. The key is used for Schlage residential and commercial locks and padlocks and substitutes for the original Schlage A and C keys.
How much torque can a keyway handle?
The limiting pressure point of a keyed shaft is the keyway side of the male shaft, provided the proper key material is selected. Thus, 270 Nm is the maximum torque that can be transmitted before the 19 mm diameter keyed shaft plastically deforms.
What are keyways made of?
Typically, key stock is made from carbon steel or stainless steel, but can also be made from aluminum, brass, copper, monel, and even nylon, all with varying material grades. AISI 316 stainless is also available for marine applications.
How many different keyways are there?
There are 7 different keyways C,CE,E,EF,F,FG and G. There is a special “P” keyway designed to accept any of the 7 keys and a special key blank designed to be accepted into all 7 keyways, 35-101 L which is made of stainless steel and requires a special machine to cut.
What is Schlage keyway?
Overview. The Schlage Classic keyway design has become one of the defaults on many products sold and installed throughout the country. The Classic keyways provide security with no restrictions on key duplications. They can also be easily upgraded or mixed with Primus XP to get enhanced protection on key duplications.
How do you know a key is locked?
In most cases the key number will be stamped on the front of the lock next to where the key enters. In some cases the number may also be stamped on the original key.
What is the difference between Schlage and Kwikset?
Both companies, Schlage and Kwikset make many different types of locks, such as residential doorknobs, deadbolts and keypads. Schlage also has a vast line of commercial products, including some heavy duty and high-security locks, whereas Kwikset has a more modest line of light commercial locks.
What are the different types of car keys?
The seven commonly known types of car keys include:
- The Mechanical Keys. These are the basic car keys usually seen in older vehicles.
- Remote Keys. These types of keys are usually needed for basic tasks such as unlocking and locking cars from a distance.
- Transponder Keys.
- Flip Style Remotes.
- Smart Keys.
- Master Keys.
- Valet Keys.
Can you duplicate a KW1 key?
This key can be duplicated using a standard key cutting machine found at most hardware stores, dealerships and locksmiths.
What is a KW lock?
1) Name on the key or Lock: Kwikset or Schlage are the most common residential locks and keys. They can be stamped with their full name on the head of the key or face of the lock. 2) Name Abbreviation: Kwikset is KW and Schlage is SC The most common keyways are KW1 & SC1.
Can you copy SC1 key?
This key can be duplicated using a standard key cutting machine found at most hardware stores, dealerships and locksmiths.
What does SC mean on a key?
ILCO is a manufacturer that uses SC as a designation to represent Schlage keys.
How do I choose a shaft key?
The key and key seat cross section are ISO standardized. The key length should be less than about 1.5 times the shaft diameter to ensure a good load distribution over the entire key length when the shaft becomes twisted when loaded in torsion.
What is the difference between keys and splines?
The main difference between splines and keys is that splines are integral with the shaft but keys are inserted between shaft and hub. As compared with one or two keys used for load transmission, there are usually four or more splines on a shaft.
What is saddle key?
Definition of saddle key
: a key for securing a member to a machine shaft that fits into a keyway in the secured member and is concave to grip the shaft by friction compare flat key, sunk key.
Is key steel hardened?
The high carbon content of the key steel means that it can be hardened. As supplied however, the steel is machinable. On hardening and tempering a hardness of up to Rockwell C55 can be obtained.
What is keyway factor?
A key factor is defined as the factor in the activities of an undertaking which, at a particular point of time or over a period, will limit the volume of output. Other variant terms are limiting factor, Principal Budget Factor & scarce factor. Limiting factors are governed by both internal & external factors.
Contents