The date code label is on a label located on either the top of the battery or the back side of the battery. The code on the top is 12 digits with the last 4 representing the month and year. In the example below 0220 means February 2020.
What do battery codes mean?
Date Code: Most batteries have a date code, usually a long string of numbers and letters that show when the battery was purchased. One row of one- or two-letter codes indicates the month, the other row of numbers is the last digit of the year.
What does the date code on a battery mean?
Many manufacturers use a date sticker on top of the battery to show the “in service” date. The sticker shows months and years, and the appropriate month and year are marked when you purchase the battery. This date showed when the battery went into service, and they calculate the warranty expiry date from here.
What do the letters in batteries mean?
The letters on a battery give the size, in height and width, of the battery. AA means “50.5mm x 14.5mm.” The later the letter the larger the battery. “D” is larger than “C”, etc. “A” is larger than “AA” is larger than “AAA”.
What do the numbers on the bottom of batteries mean?
Each number gives information on the size of the lithium-ion cell. The battery diameter is listed by the first two numbers, usually an 18 or 22. The battery height is listed by the next two numbers: 35, 44, 50, 65, etc. The battery shape, either a cylinder or a non-cylinder.
How do you read a battery code?
The 1st two digits of the serial number are letters with the remaining 10 digits being numbers. The date code is on a label located on the back side of the battery. The code is one letter, followed by one number. The letter is code for the month.
What should a 12 volt battery read fully charged?
about 12.6 to 12.8 volts
A fully charged battery will typically display a voltmeter reading of about 12.6 to 12.8 volts. If your voltmeter is showing a voltage anywhere between 12.4 and 12.8, that means your battery is in good shape. Any voltage above 12.9 volts is a good indicator that your battery has excessive voltage.
How do you read a date code?
The format of the date code is mostly in the form of a YYWW format. The first two digits (YY) represents the last two digits of the year while the last two digits (WW) stand for the week of the year. For example, 0443 represents week 43 of 2004.
How do you check a battery expiry date?
Q: Do batteries expire? A: Yes, all good things must come to an end. To find the Best If Used By (BIUB) date of the batteries in question, please look on the uppermost section of the cells, near the battery type (AA, 9V, etc.). You will see a white box with the Best If Used By year printed within it.
How can I tell how old my battery is?
If there is no date sticker, the battery will have a strip, engraving, or heat stamp with a decipherable alphanumeric code. Typically found on the battery cover and sometimes on the battery itself, this code can be several characters long, giving the date information in the first two characters in the sequence.
What do the letters and numbers on a battery mean?
The letters and numbers in the code indicate the number of cells, cell chemistry, shape, dimensions, the number of parallel paths in the assembled battery and any modifying letters deemed necessary. A multi-section battery (two or more voltages from the same package) will have a multi-section designation.
What does SW mean on a battery?
In the IEC ‘standard’ battery designation convention, the low drain or normal version of the watch battery will end with the letter ‘W’, while the high drain version would end in ‘SW’. A common watch battery is the SR44W (or the SR44SW for the high drain version).
What is a good voltage for a AA battery?
1.5V
The basic fact to remember before you check the battery is that the proper voltage for AA/AAA alkaline battery is 1.5V and the proper voltage for AA rechargeable battery is 1.25 Volts. To test the battery, turn on your voltmeter, put it on DCV and make sure that it is far above the battery voltage.
What does INR mean on a battery?
Administrator
| Long-Form Name | Chemical Abbreviation | Name Format 1 |
|---|---|---|
| Lithium Manganese Oxide | LiMn2O4 | IMR |
| Lithium Manganese Nickel | LiNiMnCoO2 | INR |
| Lithium Nickel Cobalt Aluminum Oxide | LiNiCoAlO2 | — |
| Lithium Nickel Cobalt Oxide | LiNiCoO2 | — |
What do the numbers mean on a 3v battery?
The numbers in these model numbers, actually represent the physical size of the battery. To illustrate this point, let’s take the CR2032. The 20 means that it’s 20mm wide and the 32 means that it’s 3.2 mm thick. It’s really quite simple. This same calculation applies to all the CR 3 Volt Lithium Cells.
WHAT IS A 6T battery?
The Saft Xcelion 6T® is a 24V rechargeable Li-ion battery system designed as a drop-in replacement for traditional lead-acid 6T batteries in military ground vehicles. It provides the power equivalent to two lead-acid batteries at 25% of the weight and 50% of the volume.
How do I know which car battery to buy?
In order to find the right battery for your car, you’ll need to know the group size.
- Step 1: Check for the group size on your old battery.
- Step 2: Check your owner’s manual for a group size.
- Step 3: Search online for the group size.
- Step 1: Look on your battery’s label.
- Step 2: Check your manual.
- Step 3: Check online.
How do you read a century battery date code?
The stamp on the bottom of your battery is when the case was made, not when the battery was built. The stamp on the top “A3DB” is the manufacture code. “A” is for afternoon shift, 3 is the day of the month, D is the month, and B is the year. So your battery was built by the afternoon shift on 3rd April, 2018.
Is 13.2 volts good for a battery?
Fully-charged, most car batteries will measure at least 12.6 volts (~13.0-13.2V for OPTIMA YELLOWTOPs), but low voltage doesn’t necessarily equal a bad battery. Modern cars are very demanding from an electrical perspective, even when they’re not being used.
What should a 12-volt battery read under load?
A healthy 12 volt battery should maintain a voltage range from 9.6 – 10.5 volts under the load for a good 30 seconds straight.
How do you read a 3 digit date code?
The code has two parts with the first 3 digits signifying the day of the year and the last digit signifying the year. Y will be 0 through 9 (0 for 2000, 2010, 2020 for example, and 9 for 2009, 2019, 2029, etc.)
Contents