Planer boards are typically used to catch fish that are suspended in open water, around deep water cover, or just off the banks. They first came into wide use in Kentucky on Lake Cumberland in the 1980s when the striped bass population was booming.
What is the purpose of a planer board?
At its very basic, a planer board is a device that allows fisherman to cover more area at one time, have more control over their lines and reach places they would not otherwise be able to reach.
Are planer boards necessary?
What is a Planer Board? Planer boards, for a lack of a general definition, are simply tools to get your fishing line away from the boat. If you’re trolling long flats that run for miles, planer boards are a necessity for the amount of extra ground they cover.
How deep can you fish with planer boards?
between 30 feet
Considerations to depth: When you go fishing, you always want to consider the depth that you will be fishing at. Fishing with a planer board will be no different. With a planer board, you will usually want to fish in depths between 30 feet and less.
Can you use planer boards with bottom bouncers?
Can you use planer boards with bottom bouncers? Yes, you can use planer boards for trolling with bottom bouncers.
What line to use for trolling for walleyes?
monofilament line
For most walleye trolling applications 10 to 14 pound test monofilament line is the ideal choice. Lines of this pound test rating are more than strong enough to handle even big walleye, yet thin enough to enable crankbaits and other popular trolling lures to reach substantial depths.
Can you use planer boards with lead core?
If you use leadcore on a planer board, DO NOT put leadcore line in the clip. It will break inside core and eventually will break right off. I prefer using deep divers on braided line and add weight if you like.
How fast can you troll with planer boards?
Salmon and trout fishermen are just as enamored with in-line boards because they can use them to troll their favorite lures and hardware at 2.0 to 3.5 MPH. Any species that are commonly caught trolling can be targeted using in-line planer boards.
How deep do planers run?
How Deep can Planers Get? The depth to which a planer dives depends on the area of the plate, the speed of the tow and the length of the planer line. As a general rule of thumb, you can expect around 15ft (5m) of depth for each 30ft (10m) of planer line deployed.
How fast do you troll bottom bouncers?
A good trolling speed for bottom bouncer fishing ranges from 1.0 MPH to about 1.5 MPH. Speeds this slow are going to require a small gasoline kicker motor or an electric trolling motor.
What do I need to troll?
Other necessary equipment for trolling are as follows:
- Rod Holder. Having rod holders set up behind your boat is the best solution for keeping your rods steady throughout the expedition.
- Depth Rigs.
- Paravane.
- Planer Board.
- Sonar.
Does a planer sand wood?
Answer from Lee Grindinger: “A planer will remove stock much, much more quickly than a drum sander. A sander is built to sand. For surfacing you’d be using a very coarse grit and this means several grit changes to get to the smoothness you’re looking for in a drum sander.
How much can a planer take off?
Examine the width of the lumber. Most planers remove a maximum of 3 mm per pass. If a narrow piece of lumber is being planed, the maximum amount may be removed. A piece that it at the maximum width of the planer may cause the motor to overheat and the cutter to stall.
Does a planer make wood smooth?
The planer is a tool for woodworkers who require large quantities of planed stock and who elect to buy it rough cut. A couple of trips through a planer and smooth, surface-planed stock emerges, often at a fraction of the cost of the milled boards sold at your neighborhood lumberyard.
Is mono or braid better for trolling?
Mono holds knots better and costs less than braid. It also works better on smaller bait-casting reels because light braid can dig into itself. Florida sailfish and dolphin anglers still use a lot of mono on the troll, and some use it for kite lines because it runs through the clips better.
What time of day is best for walleye fishing?
The best times of day to fish for large walleye is around dawn and dusk. In particular, 30 minutes before and after sunset and sunrise are peak times. That said, walleye will continue to feed all night long.
What kind of leader is walleye?
fluorocarbon
For casting to walleye, you can either choose 100 percent fluorocarbon or braid with a fluorocarbon leader. 10-20 lb braid with an 8-12 lb leader for casting lures. If you choose fluorocarbon, 8-12 lbs will suffice.
What is the best fishing line to use in saltwater?
Monofilament, or mono, is not only the best saltwater fishing line for most applications, it’s also the most popular. Mono is thin, strong and subtle, water resistant and has good knot strength.
How deep can you fish with lead core line?
The slower the speed, the deeper the lines will run. At normal walleye trolling speeds, you can figure about 6 feet of depth for each color. With segmented lines, let out more mono backing to run deeper. Four colors of segmented line will easily run 30 feet deep or more.
How fast does core sink?
Realistically, you can figure that for every color of lead core (10 yards) you put in the water it will sink five feet if you are trolling at an average speed of 2.0 to 2.5 mph.
How much backing is on a lead core?
The most practical way to rig and fish lead core is to first spoon on about 200 yards of backing line. The backing line can be either monofilament or super braid. Because I rig my planer boards for fishing with monofilament, I select 20 pound test monofilament as my backing line.
Contents