For many flippin’ and pitchin’ situations, faster models help you retrieve slack and manage line better, as well as pull bass from cover, he says. “But when flippin’ the thickest vegetation, the fastest reels don’t have the winching power to pull fish out. There, I prefer a reel with a gear ratio of 6.3:1 to 7.5:1.
What is a high gear ratio reel good for?
High gear ratio reel | 7.1:1 thru 8.1:1
Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high speed reel. These techniques create a lot of slack in your line, and if you get bit 30 yards away from the boat, a high gear ratio comes in handy for getting a solid hookset.
Is a 4000 spinning reel good for bass?
A 3000 size spinning reel is more suitable for medium sized fish (such as bass or pike), due to being lighter in weight, while a 4000 is better for bigger fish (such as muskie), or for saltwater fishing.
What gear ratio is best for flipping?
By today’s standards 9.1:1 is worth consideration and there are several new reels with ratios above 10:1. Good Luck and Good Fishing!
What gear ratio is best for fishing?
Best Gear Ratio For All Around Fishing
For this, we recommend using a slow to medium gear ratio from 4.9:1 to 6:1 for all-around fishing like those found in our fishing combos. This will allow you to effectively use the widest range of lures and baits.
What is the difference between lever drag and star drag?
The lever drag washer lives on the end of the spool, the star drag’s washers live inside the main gear. Bigger spool diameters give a bigger washer diameter for lever drags; a bigger main gear diameter has the same effect for star drags.
Who makes Fin Nor reels?
Pure Fishing ®
COLUMBIA, S.C. — Pure Fishing ® has announced the acquisition of iconic fishing brands Fin-Nor ® and Van Staal ® from W.C. Bradley/Zebco ® Holdings, Inc.
What is a 8.1 gear ratio good for?
High gear ratio reels | 7.1:1 thru 8.1:1
High gear ratios are best for techniques where taking up slack and bringing a bait back to the boat are critical. Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high-speed reel.
What does 6.2 1 mean on a reel?
Extra high can be over 6:1 with reels like the new 20 Saltiga 14000 XH being a 6.2:1 speed. What that means is how much line with each turn of the handle comes onto the reel, and in some cases it can be over 30cm of line put back onto your spool every full turn of the handle.
Is higher gear ratio better for reel?
Higher gear ratios tend to lead to more speed, but less power. This can mean reeling in heavy fish is difficult while smaller fish benefit more from the increased speed. You use the flippin’, pitching, or worming techniques. If you work the bait for a short period of time before quickly moving it, speed can matter.
Is a 3000 reel too big for bass?
One of the nice things about fishing for bass is that they won’t run as long as other game species of fish. Even a 3000 spinning reel will hold enough line to handle bass of most sizes.
What is a 2500 reel good for?
Choosing a fishing rod to go with this size reel: 2500 or 25 size reels are offered favored amongst anglers using a rod in lengths between 6-7ft which have a line rating of around 2-5Kgs. Common Applications (Guide only): Small fishing reel mostly suited for light fishing in lakes, rivers, bays, harbours etc.
What is the difference between 3000 and 4000 fishing reels?
Typically when people think of a 4000 size reel, they think of a bigger, heavier, “do everything” reel. But there is not much difference between the sizing of the 3000 versus the 4000. The body frames appear to be the exact same size and there is only a fraction of an ounce difference in weight.
What gear ratio is best for chatterbait?
Jigs, spinnerbaits, chatterbaits, crankbaits, swimbaits and topwater can all be effectively fished on a 7-speed gear ratio. These speed demons are made for applications when quickly picking up line is critical in order to set the hook.
What is the difference in baitcasting gear ratios?
So, the higher the gear ratio, the faster the retrieve speed of your reel. In general, casting reels are faster than spinning reels, which usually go from 5.1:1 to around 6.5:1, while baitcasters start around 5.5:1, and go all the way up to 9.3:1.
What’s the best gear ratio for a baitcaster?
The most common reel on the market has a 6.4:1 gear ratio. This will allow you to work both fast moving presentations as well as slow. However, for certain techniques and applications, a very high or low gear ratio will often work best. For instance, burning a spinnerbait or buzzbait is best done with a 7.1:1 reel.
How fast should I reel in a crankbait?
The correct speed of any crankbait reel is 21 inches of line pick-up per turn of the reel handle. Most of that information is on the internet or on the packaging. If it isn’t, measure what your reel is doing with a ruler. It’s that important.
What gear ratio is best for bass?
Reels with a gear ratio in the neighborhood of 6:1 are your workhorses. They get the bulk of the duty with most bass fishing applications, and in a pinch you could do the things best served by slower or faster reels by cranking slower or faster.
How do star drags work?
The drag washers in a star drag reel are mounted internally on top of the main drive gear and drive shaft. The way that the star drag works mechanically is quite simple.When a fish pulls hard enough against the line, the lubricated drag washers slip against one another allowing line to be payed off of the reels spool.
What’s a star drag?
: a friction brake on a saltwater fishing reel.
Where are Van staals made?
First introduced in 1992, the Van Staal reel is still being produced today by Zebco in Tulsa, Oklahoma.
Contents