These bolts are generally used for non-critical joints and applications. A grade 5 bolt is distinguished by 3 radial lines and promises tensile strengths between 105,000 and 120,000 psi. They are most commonly found in automotive applications. This sought-after grade 8 bolt can be distinguished by six raised dashes.
What is a Grade 5 bolt rated for?
medium strength
Grade 5 is specified under the Society of Automotive Engineers and is meant to be used for those applications requiring medium strength. Equivalent to the metric class 8.8 bolts, it is important to line up the right hardware if required to move from U.S. customary units (USC) to the metric system.
Will Grade 5 bolts rust?
Many other grades exist but are used far less often. Grade 2, 5, and 8 are usually plated with a slightly blue-ish or yellow zinc coating, or are galvanized, to resist corrosion.
Is Grade 5 a strong bolt?
Grade 5 bolts are hardened to increase strength and are the most common bolts found in automotive applications. Grade 5 bolts have 3 evenly spaced radial lines on the head.
Is a Grade 5 bolt strong enough for automotive?
Mild-steel bolts (also called Grade 2 or metric 5.8) have a proof strength of about 385MPa. Proof strength is the stress that the fastener will withstand without any permanent set (irreversible damage). Grade 5 bolts have a proof strength of 600MPa, and Grade 8 has 840MPa.
Are Grade 5 bolts hard?
Grade 5 Bolts and fasteners are made of medium strength carbon steel and are specified under the Society of Automotive Engineers (SAE).with a minimum tensile strength of 120,000 psi in diameters through 1 in. and 105,000 psi for diameters over 1 in. through 1-1/2 in.
Are Grade 5 bolts stainless?
Stainless Steel Grades & Strength
Stainless commonly comes in grades 18.8 (304) or T316. Stainless steel bolts are rated for corrosion resistance.A stainless steel bolt has the same PSI rating as a grade 5 bolt (125,000 PSI). A grade 8 bolt has a stronger rating with a PSI of 150,000.
Is Grade 5 harder than stainless?
The second most common stainless steel grade, this material is stronger than grade 2, slightly weaker than grade 5,or generally as strong as medium to low carbon steel. It is on the low middle end of the grade scale.
What is the strongest bolt grade?
grade 8
Commercial-grade 8 bolts are the strongest option available. They’re made from medium carbon alloy steel and have markings that include six raised dashes. The psi of the bolt is 150,000, meaning that it can withstand great deals of pressure because of the way it was quenched and tempered.
What is the yellow coating on bolts?
The yellow zinc plating of the fastener refers to the colour of the chromate that is applied once the zinc has been deposited on the fixing or fastener. This chromate prevents the zinc from corroding as well as increasing overall protection.
Should I use Grade 5 or Grade 8 bolts?
Grade 8 bolts have a minimum tensile strength of 150,000 PSI. As a comparison, the ASTM A325 bolt is roughly equivalent to the SAE grade 5. A grade 8 bolt would be one that meets ASTM A490 standards. The A325 bolt strength, or SAE grade 5 bolt strength, is usually used for structural bolting projects.
Will a Grade 5 bolt shear?
For example, an SAE grade 5 hex cap screw has a specified minimum tensile strength of 120,000 psi. Therefore, for design purposes, its shear strength could be reasonably assumed to be 70,000 psi.
What is the difference between Grade 2 and Grade 5 bolts?
Grade 2 is a standard hardware grade steel. This is the most common grade of steel fastener and is the least expensive. Except a possible manufacturer’s mark,Grade 2 bolts have no head marking. Grade 5 bolts are hardened to increase strength and are the most common bolts found in automotive applications.
Can I use Grade 5 bolts for suspension?
Ideally you want OEM bolts for any suspension application. A Grade 8 will be strong but brittle. Any Grade 5 bolt wil be weak in this application.
What grade bolts are used for car seats?
Registered. Keep in mind that FMVSS 209, which is the federal standard for passenger car seat belts, calls for use of 7/16″-20 bolts or equivelant. It does not call out a grade, but rather a minimum force when tensile tested at a 45° angle.
What grade bolts should I use?
Bolt Grade Markings
Each grade has a specific bolt strength. No matter the system used to grade the bolts, the higher number means the stronger the bolt. For most home and automotive applications, you won’t need anything more than a grade 8 bolt strength or metric class 10.9.
Is Grade 5 the same as A325?
These will be addressed in this article. When looking at the mechanical requirements of bolts it appears that a grade A325 and SAE J429 Grade 5 are identical as do the grade A490 and the SAE J429 Grade 8. Notice the Grade 5 has a much smaller head configuration and a shorter shank than the A325 structural bolt.
How can you tell if a bolt is a Grade 5?
Grade 5 bolts are case hardened, meaning the bolt has been heated enough to hardened the outside of the bolt but not enough to harden the inside portion. Grade 5 bolts are identified by 3 evenly spaced radial lines on the head.
What material is a Grade 5 bolt?
alloy steel
Grade 5. Grade 5 alloy steel is a medium carbon zinc plated alloy steel that is heat treated to increase hardness. Grade 5 bolts have three (3) evenly spaced hash marks on the head markings (manufacturers mark may also be included).
Are galvanized bolts rust proof?
Galvanized steel is coated with a thin layer of zinc. The zinc coating protects the steel beneath it from rust. It’s used to make nuts, bolts, screws, and nails resistant to degradation when they are exposed to the weather. Galvanized steel stands up to water well as long as it’s not salt water.
Are stainless steel bolts stronger than zinc plated?
Zinc is cheaper than chromium, and therefore, in general, zinc alloys are relatively less expensive than compared to stainless steel. Though more expensive, stainless steel is a strong, tough material noted for its corrosion resistance. Though some Zinc alloys can be very strong, overall stainless steel is stronger.
Contents