C-rings allow one-way draw curtains to be used on longer rods requiring a center support bracket(s). These rings are a great choice for covering large windows or sliding glass doors.
How do C curtain rings work?
They feature a convenient C-shape opening that allows them to move freely over brackets that would otherwise impede movement and can be sewn directly onto your drapery or attached to drapery hooks. They’re the finishing touch needed to give your window treatment all-encompassing good looks.
What are the metal rings in curtains called?
Grommet Curtains
Curtains with a grommet top have metal rings punched into the fabric that allow them to slide along the rod easily.
How many rings should a curtain panel have?
Industry standards are 3 to 4 rings per foot of the width of your drapery panels.
How can I get my curtains to close in the middle?
To simply keep the curtains closed, place the magnets just inside the vertical edge where one panel meets another. To seal all the curtain’s edges to the window opening, position the magnets across both sides and the bottom, if not the top of the curtain as well.
How far apart are curtain rings?
I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.
How much length do curtain rings add?
If you want a little bit more length out of your panel, ring clips are a great way to add 1-2 inches, since the clips means the fabric hangs just below the drapery rod.
What is a ripple fold drapery?
Ripple fold style curtains are curtains that have a consistent s- curve rippling across the span of the track. The ripples are created by carriers corded together to create that consistent wave. These styles are seen often in hospitality installations as hotels and banquet rooms.
How far should curtain rods extend past the window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How many drapery panels do I need?
Divide your total by the width of a single curtain panel to get the number of panels you need. ~ Multiply window width by 2.5 to 3 if you want curtains tightly gathered for a full, luxurious look. Divide your total by the width of a single curtain panel to get the number of panels you need.
How many curtain rings do I need CM?
The number of rings supplied per pole is about one per 10cm length of curtain pole. E.g. a 180cm pole will have 18 rings, a 240cm curtain pole with have 24 rings. A 150cm pole would not have an odd number of rings – instead the total number would be 16.
Why are grommet curtains so popular?
Grommet drapery panels have been a popular choice for draperies for years because they offer a modern, sleek look. Grommets come in a variety of sizes and colors so they are easily worked into any decor.
How do I keep the sides of my curtains closed?
You can close a troublesome gap between curtains and walls by installing a wrap around curtain rod and hanging curtains that are longer and wider than the window they cover. You can attach the sides of your curtains to the walls adjacent to a window using tape, pins, or Velcro strips.
How can I make curtains look thicker?
To do it, you cut the toilet paper rolls to about three inches in length. Next, remove your curtains from the rod. As you rethread them on the rod, insert a toilet paper roll between every other opening. Rehang your curtains, and they’ll look both pleated and fuller.
What curtains to use for clip rings?
The best curtain ring clips work with flat panels, but they also work with rod pocket curtains. Attach the clips to the top edge of the panel by flattening the pocket.
How do you convert rod pocket curtains to rings?
Beginning at one end, attach a hook ring to the back of the curtain rod pocket where indicated with chalk. Attach hooks an inch down to ensure the hooks don’t show when you hang the curtains. Continue attaching rings with hooks where you marked with chalk at the same level.
Can you use curtain rings with grommets?
Panels with grommets require rings that can open, slip through the grommets, and snap closed. You can also slide the grommets directly over the rod. With pinch pleat drapes, opt for eyelet rings, which feature hooks to connect to pin-on drapery hooks.
How wide should curtains be?
How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.
Are curtains supposed to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
How low should curtains hang?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
How can I make my curtains smaller without hemming?
How to Shorten Drapes With No Hemming
- Fold up the bottom at one side of your drapes to the desired length.
- Hold your tape measure along the pinned-up side of the panel.
- Press along the bottom of the panel to create a crisp edge, using a hot iron.
- Remove the pins.
- Set you iron to a medium-high temperature.
Contents