The green light on a Worcester Bosch boiler typically indicates that the burner is operating properly, which is a good sign. However, sometimes the green light can go off, with the boiler still working fine.
What does green light on boiler mean?
Usually, when modern boilers need resetting they will display a fault code or begin to flash a red or green light. These signals indicate that your boiler senses a problem, which is why it has stopped working and needs to be reset.
Should the burner light always be on?
When heat is required, the pilot light will inflame that gas and send it to the burners. The pilot light must always stay on or gas will easily escape. If the pilot light keeps turning off, then your boiler is not working.
What is the blue light on a Worcester boiler?
When a Worcester Bosch has a fast flashing blue light this means the boiler has gone into service mode. This could be for two potential reasons. Either the boiler has been serviced recently and has accidentally been left in its service mode or, alternatively, you may have accidentally knocked the switch yourself.
Why won’t my Worcester boiler fire up?
If the boiler is not igniting, there is a possibility the valve is blocked, seized or there is damage in the wired connections. No Pilot Light: When the boiler is not igniting and the pilot light has gone out, this usually means debris has blocked the jet.
What does the green light mean on my Worcester boiler?
operating properly
The green light on a Worcester Bosch boiler typically indicates that the burner is operating properly, which is a good sign.There are a couple of reasons for this, such as LED Failure or PCB Failure, essentially, the things which power the light on the boiler panel.
What is eco-mode? This function will switch off your preheat settings, which means it may take slightly longer for hot water to come through the tap. If it is not selected, the preheat is on and there will be a quicker response to a hot water demand, say Worcester.
What color should boiler flame be?
blue
The burner flames from your natural gas furnace should look blue or almost completely blue. A healthy natural gas furnace flame is characterized by a roaring blue flame with a light blue triangle in its center. There may be a tiny tip of yellow.
What color should pilot flame be?
blue
Inspecting a Gas Furnace Pilot Light Flame
A natural gas flame should be a bright blue color with a small amount of yellow at the very tip. A propane flame will have more of a bluish-green flame with a tinge of yellow at the tip. The flame should strong enough to cover about 1/2 inch at the end of the thermocouple tip.
What Colour Should the flame be in a gas boiler?
blue flame
When you look and see the flame inside your boiler it should be burning with a blue flame. If it is burning with a yellow flame, this could be a sign that carbon monoxide is being produce.
How do I reset my Worcester boiler?
When you need to reset your boiler, simply press and hold the reset button that can be found on the front of your boiler control panel. You need to hold the button down for 3-5 seconds to ensure that it is reset before re-checking the system to make sure it is working.
Do Worcester boilers have a pilot light?
I’m sorry to hear of the problems you are encountering with your Worcester Greenstar condensing boiler. We are a little confused with your comments though as the Greenstar doesn’t have a pilot light, the boiler has a fully automatic ignition system.
Why is my boiler not kicking in?
Boiler won’t turn on (no power)
If your boiler won’t turn on, the first thing you should do is check other appliances and power supplies in your home to see if they are working. If they are, check your fuse box to see if any switches have failed or tripped.
What do you do when your boiler won’t turn on?
How to troubleshoot a boiler that won’t start
- Make sure the thermostat is set to HEAT. We know it sounds silly but this happens more often than you’d think.
- Make sure your thermostat is working properly.
- Make sure the boiler’s circuit breaker isn’t tripped.
- Make sure the boiler gas valve is open.
How do you ignite a pilot light on a boiler?
Turn your gas control knob to the pilot setting. Press the knob to release gas into the boiler’s pilot light hole. Light a match and insert it into the boiler’s pilot light hole. This will ignite the pilot light.
What setting should my Worcester boiler be?
During the winter, the ideal temperature setting should be 18-21 degrees. In areas that get extremely cold, then 21-23 degrees would be sufficient. If you have taken additional measures to retain heat such as wall insulation or draught-proofed windows and doors, then you could set your thermostat to 17 degrees.
How do you light a pilot light on a Worcester boiler?
How do you relight the pilot light on a boiler?
- Turn the gas to ‘pilot. ‘
- Press and hold the reset switch for one minute and hold a flame to the pilot light at the same time.
- If all is working as expected, return any casing/doors and turn the gas from ‘pilot’ to ‘on.
What temperature should my Greenstar boiler be set at?
The minimum on the dial is 40° the maximum is 60°C The optimum setting is 4 which is 53°C. (located separately from the boiler) Don’t overheat your home – turning down your thermostat by just 1°C can cut your fuel bill by 10% (source: Energy Saving Trust). The thermostat should be set to between 18°C & 21°C.
Should my boiler be on preheat?
boilers do, indeed, now have a hot water preheat setting (sometimes called the “eco” or “warm start” setting).Using the pre-heat setting will largely eradicate this waste of water, but then you have to consider the extra energy needed to keep that water permanently heated.
When should you use Eco mode?
Selecting Eco Mode in your vehicle helps you reduce fuel consumption. In most vehicles, selecting this setting makes the engine and accelerator pedal less responsive to inputs. You might feel that the car is slow because it has become unresponsive.
What Colour should the pilot light be on a boiler?
blue
The pilot light on your boiler should be blue. If you cast your mind back to science lessons at school, you may remember that a blue flame on your Bunsen burner was considered the most energy-efficient. This is because it uses the least amount of gas to produce heat.
Contents