Apply a piece of adhesive tape, about 15 centimetres long, to the eye pad (Figure ​1). Ask the patient to close both eyes. Position the eye pad diagonally over the closed lids of the affected eye and tape firmly, but … Continue reading →

How do you cut a fiberglass fishing rod? Align the back edge of the fine-toothed hacksaw blade with the pencil mark. Slowly pull the hacksaw toward you and then away from you to cut into the fiberglass stick. Continuing cutting … Continue reading →

What are the rings on a fishing pole called? Its located on the thickest part of the rod (butt), that’s why the call it the butt guide. Guides: These are the rings you see going all the way down the … Continue reading →

Water jet is the perfect option when you need to cut thick carbon fiber panels with minimal effort. While using a router for cutting carbon fiber, thicker parts may need multiple passes. That is why it can be a time-consuming … Continue reading →

Generally, the inside diameter (ID) of the ring will match the smallest guide on the rod. Standard sizes are 6, 8, and 10mm for conventional rods, while heavier saltwater rods may go as high as a 16mm ring. What size … Continue reading →

worms. The most common baits are worms and night crawlers because they are readily available and bluegill love them. The key is to use only a piece of a worm—just enough to cover the hook. Other productive baits include crickets, … Continue reading →

Yes it is necessary for every guitar to have a truss rod except for classical guitars. The truss rod is there to help you adjust the guitar to your liking and also to keep the action low enough to make … Continue reading →