A wet location is an interior location that is subject to saturation with water or an exterior location subject to saturation with water or unprotected and exposed to the weather.Sinks have a proximity damp zone of a 2 feet radius in all directions from the water source.
Is under a sink a wet location?
Electricians say that under sink is not a wet area.
What does the NEC consider a wet location?
(NEC) National Electric Code Definitions: UL Standard 1598 Definitions:Wet Locations: A location in which water or other liquid can drip, splash, or flow on or against electrical equipment.
Is a kitchen considered a damp location?
Rooms that boast atmospheres, such as a bathroom or kitchen space, may warrant a damp rating. According to home electrical, anywhere with light fixtures exposed to water, rain, or heavy storms will often have a wet rating.
What is under the sink called?
P-Trap: A P-trap is a two-part pipe under your sink that allows waste and water to pass through. The bend in the pipe prevents sewer gasses from entering. Today, most models are two pieces joined together.
Do under sink outlets need GFCI?
Only the outlets within 6 feet of the sink (if equipped). If they supply the washer, they do not need to be GFCI’ed. Remember now if the washer receptacle is within 6′ of the edge of the sink. It would indeed require the receptacle to be GFCI protected.
Can you have an electrical socket under a sink?
Sockets and Switches
Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity.
Is a bathroom considered a wet location?
Almost all finished indoor areas are considered dry locations, including your bathroom, washroom, and above the kitchen sink. That said, installing sconces as bathroom vanity lighting will not require a damp or wet location rating. The same goes for a flush mount above your kitchen sink.
Is under a canopy considered a damp location?
Damp Location
Examples of these location include locations that are partially protected such as roofed open porches, basements, saunas, marquees, and under canopies.
Is a crawl space a wet location?
The answer is simple. Water or moisture is entering the crawl space. And the source could be anything from high humidity in the air during hot summer months to a leaking water pipe that runs below the crawl space. It could also be groundwater from saturated soil adjacent to the crawl space or inside.
Can dry location lights be used in bathroom?
Dry-rated lights typically handle low levels of moisture in bathrooms nicely because ventilation prevents the accumulation of too much condensation. In short, unless you’re wiring fixtures in close proximity to your shower, you can use dry-rated lights for most bathroom locations.
What is a damp location rating?
Damp-rated lights are used in places that have some contact with moisture, but not in areas with constant or direct exposure to water. These lights do not have the same full seals as lights made for wet environments, but they’re used in many situations around the home.
What is the meaning of damp place?
Damp, humid, moist mean slightly wet. Damp usually implies slight and extraneous wetness, generally undesirable or unpleasant unless the result of intention: a damp cellar; to put a damp cloth on a patient’s forehead. Humid is applied to unpleasant dampness in the air: The air is oppressively humid today.
What is the trap under the sink?
A plumbing drain trap is designed to retain a small amount of water each time the sink drains, and this water standing in the bottom of the curved portion of the trap seals the drain and keeps sewer gasses from escaping the drain and entering your home.
What is P trap under sink?
The p-trap under sink plumbing pipe serves the function of capturing a small amount of water inside your drainpipes after the sink is used. This plug prevents sewer gases from coming up the wastewater line and out the sink.
What is the area around a sink called?
Countertop: A flat surface around the sink.
Should a dishwasher be plugged into a GFCI?
The 2014 NEC has a new requirement for ground-fault circuit interrupter (GFCI) protection of dishwashers in dwelling units.The new requirement is for GFCI protection of outlets that supply dishwashers installed in dwelling-unit locations.
Does every sink need an outlet?
Every bathroom must have at least one electrical outlet. It must be a GFCI, and it must be within 3 feet of the edge of the sink.If the bathroom has two sinks, each must have an electrical receptacle within 3 feet. This may mean placing the outlet between them or installing two separate outlets.
Should a dishwasher be on a GFCI?
Kitchen dishwashers installed in dwelling units require GFCI protection whether hard wired or cord and plug connected. Code Change Summary: A new subsection was added regarding dwelling unit kitchen dishwashers. Now, outlets that supply dwelling unit kitchen dishwashers must have GFCI protection.
Can I put a dishwasher under the sink?
Some key things to consider when choosing a dishwasher for a small kitchen are:Tuck it underneath the sink: Opt for a single-bowl sink and integrate the under-sink dishwasher, beneath the countertop to the side of the bowl and the sink’s piping.
Is electrical work in a kitchen notifiable?
Under the new, revised regulations, electrical work undertaken in kitchens such as adding a new socket or work outdoors such as installing a new security light will no longer be notifiable unless a new circuit is required.
Contents