The SmartCraft line of products are applicable to all Mercury/Mariner OptiMax outboard engines starting with Model 2000, and all MerCruiser 8.1 liter engines for Model Year 2001. The SmartCraft line of products will not retrofit to any previous Mercury/Mariner or MerCruiser engines.
When did Mercury come out with SmartCraft?
Topic: When did Mercury introduce SmartCraft? 1999. SmartCraft preceded the Verado. However, with the Verado motors SmartCraft became mandatory.
What engines are compatible with VesselView?
*VesselView Mobile is compatible with all SmartCraft-compatible Mercury outboards and sterndrive engines (2004 and newer, 40hp and up). For engine information, including gauge functionality, alerts and maintenance reminders, the module must be installed on the engine(s).
How does Mercury SmartCraft work?
SmartCraft technologies enable boat owners to monitor and control these components from the helm via a variety of gauges and displays that serve as portals to the network.
How do I reset my Mercury SmartCraft?
By holding down both the Mode and Light buttons simultaneously, it resets the number of gallons of fuel used.
What is SmartCraft digital technology?
SmartCraft® is a full suite of digital technologies, fully integrated and totally coordinated. Gauges, sensors, vessel systems, computer-controlled features – one total package, one high level of control. Make your boating experience easier, safer, and a lot more enjoyable. Get smart.
Is there an app for Mercury outboard motors?
Mercury Marine’s VesselView Mobile app is free to install. The VesselView Mobile module can be purchased through Mercury Marine dealers or through a link inside the app. The VesselView Mobile module works with SmartCraft® capable engines built since 2003 (40HP and up). One to four engines can be viewed simultaneously.
Does Mercury vessel view have GPS?
The all-new SmartCraft Connect module enables unmatched engine performance data and alerts to be displayed on the same screen as GPS and sonar. When you boat with the Mercury VesselView® engine monitoring system, you don’t have to be a certified marine technician to track what’s happening under the engine’s cowl.
What Mercury outboards are SmartCraft compatible?
The SmartCraft line of products are applicable to all Mercury/Mariner OptiMax outboard engines starting with Model 2000, and all MerCruiser 8.1 liter engines for Model Year 2001. The SmartCraft line of products will not retrofit to any previous Mercury/Mariner or MerCruiser engines.
How do I check my hours on mercury SmartCraft?
On a twin engine setup you will see the hours for each engine by toggling through the TACH for each engine. What you are seeing are the engine hours. With a scan tool or Rinda software you can see the actual break down of what RPM ranges make up that total hour number. This shows how the boat has been run.
What is the maximum allowed drop on a Smartcraft CAN bus?
Follow these guidelines when installing the harnesses: • The maximum CAN bus length is 70 m (230 ft). The maximum length of a CAN bus drop (branch off the main harness) is 7 m (23 ft). The combined length of all drops cannot exceed 36 m (118 ft).
How many wires are in a 10 pin yellow data cable?
The five pin connector you referenced under the cowling is probably a 10-pin connector (with only 5 wires in it).
How do I reset my Mercury outboard guardian?
The Guardian System must be RESET before engine will operate at higher speeds. Moving throttle lever back to idle resets the system.
How do you calibrate SmartCraft gauges?
SmartCraft allows you to calibrate the tank two ways. The first is a simple automatic method the second more complex where you run the tank empty put enough fuel in to be ¼, then calibrate, then add more to ½ and calibrate, etc. The complex method is meant for tanks that are not symmetrical, or may be tapered.
What is mercury smart tow?
Mercury Smart Tow can set the cruise speed as low as 8 mph, letting you create the perfect conditions for wake surfing. It comes with five launch profiles, and you can customize up to eight more – so you can personalize the ride to the rider.
How do I check my hours on my Mercury OptiMax?
Call any shop and ask if they have the scanner to scan a Optimax. Ask what they would charge for a printout of the hours. The cost can either be shared and the seller keeps the printout if you don’t buy or you can pay for it.
What app does mercury use?
VesselView Mobile app
Mercury News
Available for iOS and Android mobile devices, including smartphones and tablets, the VesselView Mobile app instantly provides users access to their boat’s SmartCraft digital data in the palm of their hand.
Does Mercury vessel view mobile water pressure?
The app is still limited to just rpm, engine temperature, battery voltage, engine hours, and fuel flow. So… Water pressure will not be displayed.
Is VesselView compatible with Garmin?
“VesselView compatibility gives boaters access to vital Mercury engine information directly on their Garmin display for a more integrated and convenient on-the-water experience.”VesselView functionality is expected to be available for Garmin customers in the second quarter of 2021.
Does VesselView work with Garmin?
“The VesselView system, which is now available to Garmin and Raymarine users via SmartCraft Connect, keeps track of everything and provides alerts if any engine measurements stray away from the norm.
Does VesselView show depth?
It continuously monitors and reports operating data including detailed information such as water temperature and depth, trim status, boat speed and steering angle, and the status of fuel, oil, water, and waste tanks.
Contents