Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.
How much space is needed for inside mount blinds?
3?4″ is the minimum depth required for inside mount blinds.
How wide should blinds be?
To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top and the bottom by at least 3″.
How do you measure for internal blinds?
Use a metal tape measure for accuracy. Measure across the window width, adding an extra 10cm (4″) to the total width to allow a 5cm (2″) overlap either side of the window to block out light effectively. For roller blinds add a further 5cm (2″) to the width to allow room for the operating mechanism.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How wide can horizontal blinds be?
The width of these blinds can be anywhere between 70 and 96. It is sufficient for most windows. however, if you have windows that are larger then it is recommended to install a set of 2 or 3 blinds per headrail for better coverage and fit.
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening.If the shades are installed outside of the window opening called an outside mount the shades typically are wider than the window by a few inches and can also be longer than the window.
Does the width of a roller blind include the fittings?
For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.
How close should blinds be to the window?
If you want your blind to fit flush with the window molding you need to make sure you have enough depth in your window to accommodate the width of the headrail (each style of blind will need a different amount of depth to fit flush but as a general rule for blinds go horizontally across your window you will need 1″ to
How high should blinds be above window?
One rule of thumb is that they should sit 4-6 inches above the window frame.
How much space should be on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
What is the difference between inside mount and flush mount?
Minimum inside mount depth is the amount of depth required to securely mount the shade/blind inside the window frame. The minimum flush mount depth is the required mount depth needed for the shade/blind to fit fully inside of the window frame, without protruding outward at all.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
Can blinds be too wide?
The easiest solution for blinds that are too wide is to install them as an outside mount instead of an inside mount.However, if you don’t like the look of an outside mount, you can trim many blinds to allow them to fit within the window frame.
How wide can blinds go?
Vertical Blinds can go up to large widths and heights, generally up to 192.
How wide can you buy blinds?
Common window sizes include: Double Hung Window: Standard lengths vary from 36 to 72 inches, and standard widths extend from 24 to 48 inches. Picture Window: Standard heights range from 2 to 8 feet, and standard widths are 2, 3, 4, 5, 6 and 8 feet.
How much space do you need between blinds and window frames?
Start at the sill if there is one. Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How do you make a blind fit?
Cutting down the slats
- Align the slats so that they are even.
- Using a clamp or rubber bands, secure the slats together into position.
- Wrap the slats with masking tape to prevent chipping.
- Measure where you want to cut and mark a line with your pencil.
- Lay them on the saw and line up the blade where you need to cut.
Is it easy to cut roller blinds to size?
Cutting a roller blind is fairly simple as long as you make the correct measurements. By laying the blind flat and marking out your desired measurements you will be able to ensure your blind is cut to fit your window. When it comes to cutting the blind, you should use sharp scissors for a clean finish.
How should blinds position?
The direction ? up or down ? to close blind slats is a matter of personal preference, but if you want more privacy, tilt them up, with the rounded side facing out. With window blinds tilted up, passers-by can’t see in: The convex side faces the window, creating less space through which to view.
Contents