1/8".
What is the minimum thickness the DW733, DW734 and DW735 will plane material down to? The minimum planing thickness of theplaners is 1/8″.
How thin can the Dewalt 735 plane?
In addition to the 0 to 6″ vertical scale, the DeWalt #735 has a dial-operated depth lock with internal detents that limit minimum thickness between 1/8″ and 1 ¼”, all in ¼” steps above the 1/8″ setting.
What is the minimum size of wood you can run through a planer?
11. The distance between the infeed and outfeed rollers determines the minimum length of wood that can be planed. The minimum length is 12 inches and the minimum thickness is¼ inch. A board that is too short can kickback towards you.
What does the dial on the side of Dewalt planer do?
On the right side of the planer is a small dial that is used to set three common thicknesses. Setting it to 0, 1/4”, 1/2”, or 3/4” ensures that your part will be no thinner than the indicated value.The metal infeed and outfeed tables help support long boards and the planer cuts straight and level.
How wide is a Dewalt planer?
Enhance your purchase
| Brand | DEWALT |
|---|---|
| Item Dimensions LxWxH | 24 x 22 x 19 inches |
| Item Weight | 45.36 Pounds |
| Style | 2-Speed Planer 13″ |
| Power Source | Corded Electric |
How much does a planer weigh?
Enhance your purchase
| Brand | DEWALT |
|---|---|
| Material | Metal |
| Item Dimensions LxWxH | 24 x 17 x 21 inches |
| Item Weight | 80 Pounds |
| Style | 12-1/2″ Planer w/Feed Tables |
What is the shortest board you can thickness on the thickness planer?
Most planer manufacturers advise against planing pieces shorter than 12″. But there are times when you need to plane a workpiece that’s already been cut to a short length. To solve this problem, you need to make the workpiece act like a longer board.
What is the shortest board you can run through a planer?
The shortest board should be the distance between the infeed and outfeed roller, plus 2 inches (12” for the KCWG Planer).
What is planer snipe?
Snipe is simply when a board is cut deeper on the beginning or end when going through a planer. This is typically caused by the board lifting up into the cutter head while it’s only being held down by one of the pressure rollers.
What is the difference between DW735 and DW735X?
The only difference between the DW735X and the DW735 is that the DW735X comes with infield and outfeed tables for the planer, and an extra set of planer knives for the cutterhead. While the DW735 is just the planer machine without the infeed and outfeed tables and the extra planer knifes.
What does a thickness planer do?
A thickness planer is a woodworking machine to trim boards to a consistent thickness throughout their length and flat on both surfaces. It is different from a surface planer, or jointer, where the cutter head is set into the bed surface.
How many amps does a Dewalt planer use?
Three Knife, Two Speed Thickness Planer is powered by a 15 Amp motor to easily managing large cuts in wider materials. Three-knife cutter head with 10,000 rpm and feed speed options for 96 or 179 CPI provide optimal performance.
How do I choose a thickness planer?
So thickness planers in the 20-inch to 25-inch range are overkill for most woodworkers. And if you don’t plan on thickness planing wider boards at all, or your space is limited, then a benchtop thickness planer with a 12 or 13-inch width will work for you.
What should I look for in a thickness planer?
What to Consider When Choosing the Best Benchtop Planers
- Motor. A benchtop planer’s motor needs enough power to get the job done.
- Blade. Thickness planer blades, also known as knives, come in two styles: straight and spiral.
- Cutting Depth.
- Allowance.
- Snipe.
- Gauge and Depth Stop.
- Speed.
- Dust Collection.
Is it OK to plane across the grain?
Depending on how much material you need to take off, you could run it through a drum sander, or do the hand tool route and you a hand plane. Either way, you do not want to send parts through a planer cross grain. It is unsafe, bad for the tool, and will not produce a satisfying product in most cases.
What is the maximum depth of cut that should be made on a planer?
The depth of cut should never be set at more than 1/16 inch. 5. Make sure the board to be planed is free of knots, paint, varnish, nails, dirt, and grease.
Which type of stock should never be run through the planer?
What should you avoid when using a jointer or planer? Do not cut stock that has loose knots, splits, defects or foreign objects (e.g., metal stone) in it. Do not leave the machine running unattended. Shut off the power and make sure that the cutting head has stopped revolving before leaving the area.
Should I plane both sides of a board?
A planer on the other hand was born for the task of thicknessing.The planer can help you there too. As long as your rough boards are fairly straight, you can send them through the planer taking alternating light passes on each side. Once both faces are clean, they should be flat and mostly parallel.
Can you sharpen planer blades?
While you can most likely sharpen a HSS knife to be sharp enough to shave with, the first board through the planer will take that edge away. We recommend sharpening to roughly 600 grit. Any finer and the resulting edge gained will only last a short time.
Why does my Dewalt planer keeps shutting off?
There are bushings and bearings and gears that could be tight or dry. Could be the power source is insufficient due to an extension cord that’s too small or long. Could be the over current switch is weak. Dull blades, feed too fast for the depth of cut….
Why do planers have rollers on top?
Planers and drum sanders have two pressure rollers, on either side of the cutter/drum head. The rollers hold the board down so that it registers consistently as it passes through the machine. But at the beginning and also at the very end of the pass, the board is only being held down by one roller.
Contents