How Should Your Microscope Be Stored Or Left For The Next Class?

Store your microscope on a flat surface where it will not be disturbed. Keep your microscope on a flat surface so the parts are not damaged. The last thing you want is a passerby to knock over your microscope or a lens to break.

When storing the microscope the stage should be left in what position?

8. Always place the 4X objective over the stage and be sure the stage is at its lowest position before putting the microscope away.

What is the correct way to store your microscope?

Storage

1. Always cover the microscope with the supplied dust cover when not in use.
2. Store in a dry place.
3. In humid or moist environments, it is advisable to store the microscope in a waterproof container with a drying agent.
4. Do not touch the optical lens with bare fingers.
5. Do not store the microscope in direct sunlight.

How do you handle and store a microscope?

Hold the microscope with one hand around the arm of the device, and the other hand under the base. This is the most secure way to hold and walk with the microscope. Avoid touching the lenses of the microscope. The oil and dirt on your fingers can scratch the glass.

When storing the microscope the stage should be left in what position quizlet?

Terms in this set (35)
AVOID SWINGING THE INSTRUMENT DURING ITS TRANSPORT AND JARRING THE INSTRUMENT WHEN SETTING IT DOWN. THE MICROSCOPE LENS MAY BE CLEANED (WITH ANY SOFT TISSUE). THE MICROSCOPE SHOULD BE STORED WITH THE (OIL IMMERSION) LENS IN POSITION OVER THE STAGE.

What is the correct way of positioning the slide on the stage?

Place the microscope slide on the stage (6) and fasten it with the stage clips. Look at the objective lens (3) and the stage from the side and turn the focus knob (4) so the stage moves upward. Move it up as far as it will go without letting the objective touch the coverslip.

What is the correct way to store your microscope when you are done using it click all that apply quizlet?

Store the microscope with the cord wrapped neatly around the base, with the lowest power lens in position. Store the microscope with the low-power objective lens in position. Why should you never clean the microscope with any soft cloth or tissue and water.

How do you store a microscope quizlet?

Terms in this set (7)

1. Put the low power objective into place.
2. Lower the stage.
3. Take the slide off the stage.
4. Turn the microscope off.
5. Wrap the cord.
6. Cover and push the microscope to the back of the lab bench (to a safe location)
7. Clean lab station.

How do you keep the microscope in good condition?

Take a look at our top tips to keep your laboratory microscopes in tip top condition.

1. Handle with care. Improper handling is a common cause of many problems that occur with microscopes.
2. Look after lenses.
3. Keep covered.
4. Store safely.
5. Keep clean.
6. Take care of bulbs.
7. Clean carefully.
8. Refer to the user’s manual.

How do you care for a microscope?

Keep area clean
Keep the stage clean with lens paper to remove dust and particles, you can use a little alcohol to remove oil and other dirt if needed. A small soft brush or canned air can be used to dust off the microscope – use carefully. Do not prepare or stain samples next to the microscope.

When using the mechanical stage on the microscope and moving the slide to the left the image under the microscope will?

Similarly, if the slide is moved left while looking through the microscope, it will appear to move right, and if moved down, it will seem to move up. This occurs because microscopes use two sets of lenses to magnify the image.

Why should a microscope be stored on low power?

Objective lenses Always start and end your microscope session by placing the lowest power objective lens in position. This will make it easier to prevent crashing the objective lens into the slide.

What is the recommended part of the microscope to hold when transporting it?

The microscope arm connects the eyepiece tube to the base. This is the part you should hold when transporting a microscope.

Where are slides placed on a microscope?

Stage
Stage: The flat platform where you place your slides. Stage clips hold the slides in place.

What moves the stage up and down on a microscope?

COARSE ADJUSTMENT KNOB — A rapid control which allows for quick focusing by moving the objective lens or stage up and down. It is used for initial focusing.

What must you do before storing your microscope after using the oil immersion lens?

If you are using immersion oil the high power objective lens (usually 100x) and the lens of the condenser should be thoroughly cleaned before storing. After using the microscope, turn off the illuminator and wait for it to cool for several minutes before putting it away.

How should you leave a microscope when you are finished with it 4 steps?

Terms in this set (8)

1. First step. Turn light off and allow microscope to sit for five minutes.
2. Second step. Turn stage all the way down.
3. Third Step. return objectives to low magnification.
4. Fourth Step. Remove slide and rest stage clips on.
5. Fith Step. Loosely wrap and secure cord.
6. Sixth Step.
7. Seventh step.
8. eight step.

What should be done when you are finished using a microscope?

What should be done whenever you are finished using a microscope? Remove the slide, turn the scope to low power, turn off the light.

How do you use a microscope quizlet?

Terms in this set (16)

1. Plug it in and turn light on to make sure it works.
2. Lower stage or raise body tube using course adjustment knob.
3. Place slide onto stage clips.
4. Look through microscope under low power, turn course adjustment knob to find and focus in on object.
5. Adjust light using diaphragm if necessary.

Why should we take care of the microscope?

Lens and Objective Care – Microscope lenses are very fragile and need to be handled with care to prevent scratches. Never let your lens touch the microscope slide and never touch any of the lens with your fingers. Microscope lenses are difficult to clean and proper care is very important.

How do you clean a microscope?

To clean the eyepiece lens of your microscope, breathe onto the eyepiece lens and then wipe with lens tissue. For dirt that is difficult to remove, add ethanol (methanol in extreme cases) to a cotton swab, wipe the surface and then dry with a dry swab.