How Owntracks Works?

OwnTracks (and its Android fork NextTracks) is a free and open source application for iOS and Android that allow you to track your location and send it directly to Home Assistant. By default the integration will listen for incoming messages from OwnTracks via HTTP.

https://www.youtube.com/watch?v=UieAQ8sC6GY

How to use OwnTracks?

OwnTracks Regions
To do it via the OwnTracks app, go to Menu, Regions, and then tap the “ + ” icon at the top to add a new location. In the Description field, enter a name for the new location, then tap on the GPS icon and search for the location that you would like to set up.

How can I track my home assistant location?

Android users can find custom sensor settings for location tracking under App Configuration > Manage Sensors > Location Sensors. The settings allow you to adjust the minimum required accuracy for the location to be reported to Home Assistant.

How do I create my OwnTracks?

To configure OwnTracks, you must set it up via the integrations panel in the configuration screen. This will give you the webhook URL to use during mobile device configuration (below).
Configuring the app – iOS

1. Mode: HTTP.
2. URL:
3. Turn on authentication.
4. User ID:

How do I use home assistant MQTT broker?

MQTT

1. Browse to your Home Assistant instance.
2. In the sidebar click on Configuration.
3. From the configuration menu select: Integrations.
4. In the bottom right, click on the Add Integration button.
5. From the list, search and select “MQTT”.
6. Follow the instruction on screen to complete the set up.

What is home assistant Hacs?

HACS (Home Assistant Community Store) for Home Assistant
Manage (Install, track, upgrade) and discover custom elements for Home Assistant directly from the UI. What?* HACS is a integration that gives the user a powerful UI to handle downloads of custom integrations and plugins.

How do I add someone to my home assistant?

In the menu on the left is the link to the settings (gear icon). If you click that you are presented with several options (integrations, automations etc.). There also is the link to the user configuration. Clicking that should display your single user, and a small + icon on the lower right to add additional users.

How do I set up Samsung home assistant?

Setup instructions

1. From Home Assistant, navigate to ‘Configuration’ then ‘Integrations’. Click the plus icon and type/select ‘SmartThings’.
2. Enter your Personal Access Token.
3. Select the SmartThings Location to add to Home Assistant.
4. On the window that opens:
5. Back in Home Assistant click ‘Finish’.

What is MQTT broker IP?

The IP address or hostname of your MQTT broker, e.g., 192.168. 1.32. The network port to connect to. Default is 1883.

How do I host MQTT broker?

Building a Raspberry Pi MQTT Broker

1. Install the mosquitto MQTT Broker.
2. Enable the mosquitto broker.
3. Subscribe to the MQTT Topic Locally.
4. Publish to the MQTT Topic Locally.
5. Select a Test Machine.
6. Install the MQTT Client Package.
7. Identify the Raspberry Pi on the Network.
8. Subscribe to the Topic Remotely.

What is MQTT broker?

An MQTT broker is an intermediary entity that enables MQTT clients to communicate. Specifically, an MQTT broker receives messages published by clients, filters the messages by topic, and distributes them to subscribers.

How long does Hacs take to setup?

Which in return will cause the initial startup of HACS to take over 1 hour to finish.

How install from Hacs?

Initial Install of Home Assistant Community Store (HACS) on Home Assistant OS or Supervised

1. Click on your Home Assistant username (in the lower left corner) and enable Advanced Mode if it is disabled.
2. Go to Supervisor > Add-On store > type ssh > select the Terminal & SSH under the Official add-ons section > hit Install.

How do I turn on Advanced Mode home assistant?

Activate Advanced Mode
Go to the Profile tab in Home Assistant and scroll down to turn on Advanced Mode. Advanced mode will give you the ability to use the Check Configuration tool.

Where are home assistant stores?

Home Assistant auth provider
User details are stored in the [your config]/. storage directory. All passwords are stored hashed and with a salt, making it almost impossible for an attacker to figure out the password even if they have access to the file.

Where is configuration Yaml in Hassio?

If you use Home Assistant Core, you can find configuration. yaml in the config folder passed to the hass command (default is ~/. homeassistant ).

Can you run home assistant on a phone?

The Home Assistant installation guide recommends using a Raspberry Pi to run the automation server. An additional benefit is that the tablet can be used as a wall-mounted UI for Home Assistant – UI and server, all running on one device.

Does home assistant work with Android?

We have a brand new Home Assistant Companion for Android release that we are excited to get into your hands and will roll out over the next day or so in the Google Play store.

What is home assistant Io?

www.home-assistant.io. Home Assistant is a free and open-source software for home automation that is designed to be the central control system for smart home devices with focus on local control and privacy.

Does ESPHome use MQTT?

The ESPHome native API has many advantages over using MQTT for communication with Home Automation software (currently only Home Assistant). But MQTT is a great protocol and will never be removed.

How do you use Mosquitto?

Running Mosquitto:

1. To start the broker, open a command prompt by clicking on Start | All Programs | Accessories | Command Prompt.
2. In the command prompt, navigate to the Mosquitto root folder, such as C:Program Files (x86)mosquitto.
3. Start the Mosquitto service by running the command: “net start mosquitto”.