Alaris 8120 PCA Module Infusion Pump ($2995.00)
How much does an Alaris channel cost?
Purchasing a pump costs $2,700 for a new Alaris SE Gold single channel pump and $2,900 for a new dual channel pump. Renting a single channel pump costs $135/pump/month. We determined if it was necessary to purchase or rent more pumps if a pump is placed at each bedside for adult inpatient care.
How much does an IV pump cost?
The cost of these devices ranges from $2,184 to $6,865. The cost will more than double, however, when these devices are networked into the hospital, pharmacy, or electronic medical records, the cost will more than double.
PCA Pumps.
| Low | High | Average |
|---|---|---|
| $1,800 | $4,500 | $3,440 |
How many channels can an Alaris pump hold?
The Alaris® Infusion Pump is designed to operate a maximum of four infusion or monitoring channels.
What does an Alaris pump do?
The BD Alaris pump module is a large volume infusion pump that continuously or intermittently delivers fluids, medications, blood and blood products to adult, pediatric or neonatal patients. Clinicians can attach up to four infusion modules, allowing four independent infusions on a single BD Alaris PC unit.
Where are Alaris pumps manufactured?
Alaris markets its products in the United States, Canada, Latin America, Europe, the Middle East, Asia, and Australia, and maintains manufacturing facilities in San Diego, California; Creedmoor, North Carolina; Hampshire, England; and Tijuana, Mexico.
Who makes Alaris pumps?
Becton, Dickinson and Company
Becton, Dickinson and Company (BD) manufactures the BD Alaris Systems pumps. The U.S. Food and Drug Administration allowed the first models onto the market in the 1990s. The agency has since cleared more models for sale.
What are the 3 main types of IV fluids?
There are three types of IV fluids: isotonic, hypotonic, and hypertonic.
- Isotonic Solutions. Isotonic solutions are IV fluids that have a similar concentration of dissolved particles as blood.
- Hypotonic Solutions. Hypotonic solutions have a lower concentration of dissolved solutes than blood.
- Hypertonic Solutions.
What are the disadvantages of intravenous infusion pumps?
Disadvantages:
- The pressure produced can cause extravasation/infiltration of intravenous fluids.
- The alarm will sound when the pressure reaches high levels eg 2000mm/Hg.
- The occlusion alarm is proportional to flow rate, ie if a low flow rate is set, the alarm may take up to an hour to sound.
Why does the IV machine beep?
Your pump may alarm or beep for a number of reasons. It will alarm if a medicine is finished infusing or if the pump detects a blockage or air in the line. Always call your nurse when the pump starts to alarm. Do not try to silence the alarm or fix the problem yourself.
Can Alaris pump administer blood?
Can blood and blood products be infused through the Alaris Pump module? 5. Does the AlarisPump module require dedicated IV administration sets? Yes, the Alaris Pump module administration sets were developed for specific use with the Alaris Pump module.
Can the BD Alaris system be used on more than one patient at a time?
The BD Alaris System can be used on MORE THAN one patient at a time. Soft limits (Soft Guardrails) can be overridden, based on clinical requirements. To interrupt a power down sequence, a user can quickly press any key (except System On) on the PCU.
How do you unlock the Alaris IV pump?
Press and hold the Tamper Resistance Control on the rear of the Alaris PC unit for three seconds. 2. When the keypad is locked, a PANEL LOCKED prompt remains on the screen for three seconds.
Can basic infusions be promoted to a Guardrails Suite MX intermittent drug?
Basic Infusions cannot be promoted to a Guardrails Suite MX intermittent drug. They can only be promoted to a Guardrails Suite MX continuous infusion. Once a patient weight is entered and the infusion is started, the patient weight is automatically entered for any additional weight-based calculation.
Who is Alaris?
Kodak Alaris is a British manufacturer and marketer of traditional photographic supplies (including film, paper, and processing chemicals), hardware and software for digital imaging and information management, and retail printing kiosks.
Who uses infusion pumps?
An infusion pump is a medical device that delivers fluids, such as nutrients and medications, into a patient’s body in controlled amounts. Infusion pumps are in widespread use in clinical settings such as hospitals, nursing homes, and in the home.
What is a large volume infusion pump?
Large-volume pumps (LVPs) are used to accurately deliver liquids through IV or epidural routes for therapeutic and/or diagnostic purposes, normally with rates from 0.1 to 999 mL/hr or higher.
How does a Baxter pump work?
Baxter Elastomeric Pumps are non-electronic medication pumps designed to provide ambulatory infusion therapy. Medication is delivered to the patient as the elastomeric balloon consistently deflates and gently pushes solution through the IV tubing and into the catheter/port.
What is D5 for?
Dextrose is a form of glucose (sugar). Dextrose 5% in water is injected into a vein through an IV to replace lost fluids and provide carbohydrates to the body. Dextrose 5% in water is used to treat low blood sugar (hypoglycemia), insulin shock, or dehydration (fluid loss).
What are isotonic fluids?
Isotonic solution: A solution that has the same salt concentration as cells and blood. Isotonic solutions are commonly used as intravenously infused fluids in hospitalized patients.
Is 0.9% isotonic saline?
0.9% saline is a perfectly isotonic solution that is isoosmolar to human plasma and is not associated with hypernatremia [2].
Contents