The Cost of Relighting the Pilot Light A plumber can help reignite the pilot light. They will charge you an hourly fee of $40 to $150. This is usually a fairly brief project, and may just take an hour.
How much does it cost to light a pilot light?
Running a pilot light for 1 hour costs about 1 cent (0.62 cent/hour for natural gas and 1.64 cent/hour for propane). Monthly costs of running a pilot light range from $4.49/month (natural gas) to $11.34/month (propane).
Can I relight my own pilot light?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
Will gas company relight pilot?
Absolutely! We can send a gas service technician to light your pilot, and conduct a gas safety check of your gas fireplace or any other gas appliance to ensure your safety.
Is it bad if the pilot light goes out?
A pilot light is a small flame that is built into your gas heating appliances, such as a furnace or water heater.If the pilot light goes out for any reason, the current stops, the valve closes, thus preventing any gas from leaking.
Are pilot lights expensive?
Most pilot lights consume around 600 BTUs of gas every hour.90 per therm, you will pay around $3.90 per month to keep your pilot light on. At $1.20 per therm, your monthly cost will land approximately $4.95.
How much gas does a pilot light use per day?
Just how much gas does a pilot light consume? Most pilot lights will consume about 600 BTU’s of gas/hour. With 24 hours in a day, that’s roughly 14,400/BTU’s each day. Figuring 30 days, a pilot light will use approximately 432,000 BTU each month.
When did furnaces stop using pilot lights?
Newer gas furnaces (since about 2010) do not have a traditional pilot light that burns all the time. Instead they use electronic ignition systems that light only as needed. Constant flame or standing pilot heating systems are still fairly common in older homes, and they can still be repaired in most cases.
Do you smell gas when pilot light goes?
Pilot light safety is important to prevent fire or poisoning from natural gas the pilot burns.If you smell the rotten egg odor of escaping gas, check to see if the pilot light is extinguished. If it is not, turn the gas valve to the off position and call your gas company.
How do you reignite a pilot light on a gas fireplace?
Hold the pilot button down for about 20 seconds to give the thermocouple time to heat up, then release it. The pilot should stay lit, but if it doesn’t, relight it and hold the button a little longer. Turn the button to the On position, then replace the fixed glass assembly and the decorative cover. You’re done!
Who do I call when my pilot light goes out?
If possible, shut off the main gas supply valve by turning it clockwise (to the right). Once at a safe distance, report the potential gas leak to your propane dealer or 911. Do not return to the building until a qualified service technician or EMT says that the building and gas system are safe.
How do I turn my gas back on after disconnecting?
You are going to need a wrench or gas shut off tool to do this. Very slowly, turn the meter back into the on position. The lever should be in line with the pipe after making a ninety-degree turn. Finally, you can re-light any of the pilot lights in your appliances.
Can I turn my gas back on myself?
Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.
How much does a thermocouple cost?
It costs $150 to $250 to replace a thermocouple. It checks to make sure the pilot light is on. It will shut the gas off if it’s not.
Do I need to turn gas off if pilot light goes out?
Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.
Why does pilot light go out on hot water tank?
Some of the most common reasons that water heater pilot lights go out include: A faulty thermocouple.Over time, thermocouples can begin to malfunction and shut off the gas supply to the pilot light even if it’s burning properly. A bent or dirty thermocouple.
How much propane will a pilot light burn?
There are about 91,000 BTU in a gallon of propane. And the cost per gallon of propane is a lot higher than natural gas, floating somewhere around $3.05/gallon now. Doing the same math it would mean the pilot uses about 8 gallons of propane per month, which translates to about $24.00 in fuel cost.
Can a pilot light cause a fire?
When the appliance is turned on, a valve releases more gas, which is ignited by the pilot light.If this leak continues, its concentration may reach a point where a spark such as that from a cigarette lighter, static electricity, or even the pilot light itself as it is re-lit will cause a fire or even an explosion.
Should the pilot light always be on water heater?
The pilot light in your hot water heater does more than simply ignite the gas. Without it, the water heater won’t be able to maintain internal temperatures, allowing the water to cool off.
Is it OK to leave pilot light on gas fireplace overnight?
Final Takeaways on Gas Fireplace Pilot Light Safety.
Should the pilot light always be on in a gas heater?
Most furnaces with electronic ignition have a device called a hot surface igniter.The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
Contents