How Low Can You Set An Ecobee Thermostat?

2?F/1.1?C.
The lowest possible range in Auto mode the ecobee can maintain is 2?F/1.1?C. This setting prevents your equipment from short cycling.

What is cooling range on ecobee?

Heating/Cooling Ranges
You can configure your ecobee thermostat to only display a specific heat and/or cool set point range. This prevents users from selecting values outside the displayed range. On the thermostat:Select Heating range or Cooling range. Adjust the allowed upper and lower values.

How do I change the auto range on my ecobee?

The minimum allowable gap between the two set points is determined by the Heat/Cool Min Delta threshold. You can edit this by going to Main Menu > Settings > Installation Settings > Thresholds.

How do I set my ecobee thermostat to cool?

1 Enable Auto Mode

1. Press Menu on the main screen.
2. Go to Settings.
3. Then go to Installation Settings.
4. Select Thresholds.
5. Select Auto Heat/Cool.
6. And choose Enable.

Can you override ecobee thermostat?

Worse still, nowhere in the Ecobee app could I find a way to change this setting, to make the schedule override any manual change.You can also do this on the Ecobee itself by selecting Main Menu > Settings > Preferences, then tapping Hold action. Set it to Until next activity and you’re done!

What is Stage 1 cooling?

A single stage heating or cooling system means your furnace or air conditioner has only one level of heat or cold output. Single stage thermostats are used to control single stage HVAC systems—thus, if you have a single stage heating and cooling system, your home needs a single stage thermostat.

Should I set a minimum fan runtime?

If you don’t want to go back and forth between runtimes in the settings, most recommend keeping the minimum fan runtime to run for five to 20-minutes, depending on the season and the climate you live in.

What does Ecobee thermostat auto mean?

In Auto mode, the thermostat will engage both your heating or cooling as necessary. This mode is most useful if you live in a region where the temperature fluctuates regularly or you’re in the middle of a season change and you may need both heating and cooling at different times during the day.

How do I calibrate my Ecobee thermostat?

To Configure Temperature Correction

1. Press Menu on the main screen.
2. Go to Settings.
3. Then go to Installation Settings.
4. Select Thresholds.
5. Then select Temperature Correction.
6. Adjust the temperature reading to fit your needs.

Can Ecobee run humidifier without heat?

2) You have to know that when you set up your humidifier with Ecobee, you have to tell it that it’s a “steam” humidifier, NOT an evaporative one. This is not true, but it will allow the Ecobee to call for humidity even without heat blowing.

Why is my ecobee thermostat not cooling?

Your ecobee thermostat is powered off or is frequently rebooting. Water leakages, puddles of water, or signs of moisture around the air conditioning unit. An overflowing or full condensate drain pan. Signs of water damage around the drain pan or condensate drain line.

What is stage2 AUX heat?

Two-stage heating means the furnace has two levels of heat output: high for cold winter days and low for milder days. Since the low setting is adequate to meet household heating demands 80% of the time, a two-stage unit runs for longer periods and provides more even heat distribution.

Does ecobee control humidity?

The ecobee also has a humidity sensor within the base. If you have a whole house humidifier or dehumidifier, it can be controlled by this thermostat.

What is comfort setting on thermostat?

Essentially, Comfort Settings are a predefined heat/cool setting that can be applied to a specific period of a day. The activity and the comfort setting work together to determine what temperature is maintained and for how long.

Why does my ecobee keep running?

This is a common problem with Ecobee and other smart thermostat systems. If this setting isn’t switched to “auto,” your fan could be stuck running all the time. With the fan in “auto” your system is going to automatically run the fan whenever it needs to adjust the temperature of your home.

Does the Ecobee thermostat count as a sensor?

ecobee room sensors are an additional accessory that you can pair with your ecobee smart thermostat which allows the thermostat to know the temperature of different rooms in your house. Not only do the room sensors detect temperature, but they also have motion sensors so it can tell when somebody is in that room.

Do I need a 2 stage thermostat?

To sum it up: If you plan to keep your home at a constant temperature, you don’t need a two-stage thermostat. If you want to vary the temperature of your home during the day or night, a programmable two-stage thermostat is the way to go.

Is a 2 stage air conditioner worth it?

For those who are looking for something more efficient, two-stage and variable speed systems are worth considering. These units have fewer instances of cycling on and off, which allow you to enjoy: Lower energy bills. More effective humidity control.

What is 2 stage air conditioner?

Two-stage cooling refers to the type of compressor that’s in the outside condensing unit. This feature allows for two levels of operation depending on your cooling needs — full capacity on hot summer days or part capacity for milder days.

How does ecobee know if a room is occupied?

The sensors include a motion detector to tell the ecobee which parts of your house are active.The motion sensors are passive infrared motion sensors. This means they use the natural infrared radiation given off by all objects as a means of detecting motion, and therefore work regardless of light or dark.

How long does it take ecobee to calibrate?

The “Calibrating” message on your Ecobee thermostat screen indicates that it is measuring the current indoor temperature. Ecobee calibrates once it’s installed initially or when it reboots, and it typically takes around 5 to 20 minutes.