“We troll at two miles-per-hour and all we catch is white bass and sheephead,” Holst explains. “We throw a little speed at these fish, and all we catch is walleyes.”
How fast do you troll Rapala for walleye?
The best trolling speed for fall walleye is from 1.3 to 1.8 mph (and you can go up to 2.2 mph early in fall). Water temperatures start to cool down in the fall, and it’s best to troll slower than in summer, which means you’ll hardly ever go above 2.2 mph.
How fast can you troll with a downrigger?
Most people troll at 1.5 to 3.5 mph. How do you know if you are at the right speed? Sure, you can look at your GPS speed over ground readings, but you see your downrigger lines are almost straight at 2 mph.
How fast should you troll crankbaits?
Changing speeds is key
Typical crankbait trolling speeds are 1.5 – 3 mph, and there are times when it makes a big difference. If you are marking bait and fish but not hooking up, don’t be afraid to speed up or slow down. Making “S” turns is also a good way to test several speeds at once.
Is a Rapala a crankbait?
Rapala OG (Ott’s Garage) Slim 6 Crankbaits are a premium balsa flatside crankbait born from the garage of one of today’s best crankbait fisherman, Ott DeFoe. This bait produces a medium wobble that entices wary bass to strike, coupled with the natural buoyancy that balsa wood provides.
Can you troll a floating Rapala?
If you’re in deep water or trolling you can add weight to your line to get your lure down deep. The Rapala will float and wobble a bit above the wait, which is quite alluring for predator fish.
How far behind the boat should I troll?
Every boat is different and you should make your boat your own study. Proper distance for most boats will be anywhere from 20 feet to 150 feet behind your boat. Whether you have inboard diesel or outboard gas engines, your power dictates the distance you troll your baits and lures.
What is a good trolling speed on a boat?
It is best to go 1.5-2.5 miles per hour while trolling. While trolling, people can go up to 10 miles per hour or more, but those speeds are rarely necessary. Use a trolling speed indicator to monitor the speed of the boat at all times. The exact speed needed varies on the species of fish.
What is the best speed for trolling for salmon?
The best trolling speed for salmon will lie somewhere in the range of 1.5 to 3.5 mph depending on your exact setup. Dodgers are designed to dart from side to side without much spinning. If you start to run at speeds above 2.5 mph you may well end up making the dodger spin.
How fast do you troll for marlin?
One of the best methods to locate marlin early in the season is by trolling a set of marlin lures. Most boats troll at 6.5 to 8 knots and stagger trolling lures along the ‘clean’ lanes or alleys which form behind a boat at trolling speed. Placing your trolling lure in these lanes is critical.
How can I reduce my troll speed?
- Shut Down Your Boat’s Engine(s) If your boat has multiple outboards, shutting down one or more engines will allow you to drop speed.
- Shifting Engines Out of Gear.
- Using Drift Socks and Trolling Bags.
- Benefits of an Auxiliary Outboard Engine.
- Using an Electric Motor.
- Outboard Engines with Troll Mode.
Can you troll with a crankbait?
When trolling crankbaits, use a bait casting reel and a medium heavy rod, six to seven feet in length. I prefer to use Magnathin in the ten-pound test (walleye color). The new superlines will also work. Longlining crankbaits is a very simple technique that will produce fish.
Do you use a weight with crankbait?
As the water temps bottom out, try weighting your wintertime crankbaits to maximize their effectiveness. A little extra weight will kelp you throw them farther, get them deeper and keep them there longer.
How much line should you let out when trolling?
Trolling Depth Trick #3
Consider the following example: If you’re trolling a tandem rig tied with two five-ounce bucktails (5 x 2 = 10), and you let out 100 feet of line (double 50, so multiply by two again), according to the Rule it will run at about 20 feet below the surface (5 x 2 = 10 x 2 = 20).
How do you control crankbait depth?
Move your crankbait too slow or too fast and it’ll run too shallow. The bill has to bite into the water at the correct angle for the lure to run as deep as possible. The length of your cast is the next thing that affects running depth. A longer cast will let the bait get down deeper.
How can I make my lures deeper?
We’d suggest trying a 20 foot leader (shorter leaders do better in current), attach a 3 or 4 oz. Snap Weight, and then let out line until you feel the lure tick bottom. Those river fish relate to the bottom, so it’s Snap Weight setupimportant that you get your lures down there.
What depth do you fish for walleye?
Walleye are generally caught between 10-40 Ft. A typical mid-sized lake in the Midwest would likely hold Walleye between the depths of 10-15 Ft. during the Spring, 15-25 Ft. transitioning to Summer, 25-40 Ft.
Are black crankbaits good?
Black and blue is one of the best color combinations for a bass jig, but the color combo has never really caught on with lure manufacturers of crankbaits. However, I have discovered the touring pros have been using all black or black-and-blue crankbaits to catch bass in certain situations throughout the years.
How much does a Rapala DT10 weigh?
3/5 oz.
Ike’s Custom Ink Color
| Model Number DT04 | |
|---|---|
| Model Number DT10 | |
| Running Depth | 10′ |
| Body Length | 2-1/4″ |
| Weight | 3/5 oz. |
How deep is a floating Rapala?
The Rapala Original Floater is designed to dive to a depth of 2 to 6 feet (0.6 to 1.8 m) on its own. To go deeper when casting into medium depths, you can put a split shot 12 to 24 inches (0.3 to 0.6 m) ahead of your line. (The lighter the line you use, the lighter the split shot you can use to weight your lure.)
How deep do Hot N Tots dive?
Additional Information
| Model Number | Running Depth | Hook Size |
|---|---|---|
| H | 5′-14′ | 6 |
| AH | 7′-20′ | 3 |
Contents