The best trolling speed for fishing with a crawler harness is from 1 to 1.4 mph. This is significantly slower than most other baits used in the summer, and the reason for this is that you don’t want to rip off your nightcrawler from the harness by trolling at high speeds.
How fast should I troll?
So, what is the best trolling speed? The best trolling speed depends on several factors including the type of fish, water conditions and lure choice. In general, trolling speeds between 1.5 and 2.5 mph, as measured by GPS, are a good starting place for most species like walleye, trout and salmon.
How fast should you troll for walleyes?
Trolling speed, in the spring, is best at 1.3 – 1.5 mph. Summer trolling speeds increase 1.5- 2 mph as walleyes are more active in warmer water temperatures.
How far behind the boat should I troll?
Every boat is different and you should make your boat your own study. Proper distance for most boats will be anywhere from 20 feet to 150 feet behind your boat. Whether you have inboard diesel or outboard gas engines, your power dictates the distance you troll your baits and lures.
How fast can you troll with a downrigger?
Most people troll at 1.5 to 3.5 mph. How do you know if you are at the right speed? Sure, you can look at your GPS speed over ground readings, but you see your downrigger lines are almost straight at 2 mph.
Can you use minnows on a crawler harness?
You can put crawlers, minnows, leeches and plastics on a harness.
What can you catch on a crawler harness?
One of the most effective presentations to catch walleyes is a crawler harness. The combination of the spinner providing color, flash and vibration teamed up with a live bait offering is hard for a walleye to resist. They can be drifted or trolled.
What depth do you need to catch walleye?
Walleye are generally caught between 10-40 Ft. A typical mid-sized lake in the Midwest would likely hold Walleye between the depths of 10-15 Ft. during the Spring, 15-25 Ft.
What size hooks for crawler harness?
For single hook harnesses a size #2, #1 or 1/0 Octopus live bait hook is often used. Sometimes a longer shanked hook is preferred for single hook harnesses, such as a #2 , #1, 1/0 or 2/0 Aberdeen or a size 1/0, 2/0 or 3/0 EWG or Offset worm hook.
How fast should you troll for wahoo?
Wahoo (also called ono) can swim at least 60 mph, so trolling at 14, 16 and even 20 knots is now commonplace using techniques developed by Capt. Ron Schatman, winner of a dozen major Bahamas wahoo tournaments over five years. “In 1995, I went from pulling baits at 14 knots to pulling lures at 18 knots,” Schatman says.
How fast should you troll for mahi?
between 2 and 9 knots
Mahi Mahi are aggressive fish and will eat fast as well. Professionals tell you to troll for Mahi Mahi between 2 and 9 knots. Try varying speeds until you get a bite, but more importantly be consistent and make sure you keep the boat moving at a steady pace.
What is the best speed for trolling for salmon?
The best trolling speed for salmon will lie somewhere in the range of 1.5 to 3.5 mph depending on your exact setup. Dodgers are designed to dart from side to side without much spinning. If you start to run at speeds above 2.5 mph you may well end up making the dodger spin.
How fast do you troll for marlin?
One of the best methods to locate marlin early in the season is by trolling a set of marlin lures. Most boats troll at 6.5 to 8 knots and stagger trolling lures along the ‘clean’ lanes or alleys which form behind a boat at trolling speed. Placing your trolling lure in these lanes is critical.
How fast do you troll for mackerel?
The secret to more effective Mackerel trolling is speed. If you want to catch more Mackerel on lures, troll faster. While 6 knots is okay, 7, 8, 9 or 10 knots is even better. The faster you can troll, the more likely you are to get connected.
Can you troll with live minnows?
Okay, enough whining. The upside to all this heat is it’s going to kickstart some good high-country trout fishing.All the usual fare — Needlefish, Rapalas, grubs, nightcrawlers, Trophy Sticks, etc. will certainly get bit, but my all-time favorite way to catch big trout this time of year is to troll with live minnows.
How long should a spinner rig be?
On a clean lake bed, I use around six to seven inches as my boom. If there is a bit of muck or weed on the bottom, I will lengthen that slightly. That is it, the rig really is as simple as that and you’ll see this from the sequence. It is dead easy to change the hook as well.
What line do you use for worm harness?
For my style of fishing, an abrasion-resistant fluorocarbon leader works best; I prefer 10 to 20lb Seaguar AbrazX line. The selection of the line pound test is dependent on water clarity. I recommend 15lb line as an all-purpose use leader.
What fish is like Nightcrawlers?
The truth is though, nightcrawlers are one of the deadliest trolling baits available – on many species like walleyes, bass, trout, and even big crappies. At their simplest, crawler harnesses are lengths of monofilament with a spinner blade or two threaded on, then a hook.
What size beads for a walleye spinner rig?
Pick what you like and pick beads that either complement the color in the blades or contrast with it. Again, size of blade is up to you. As a general rule, sizes 4, 5, and 6 are used for most walleye fishing.
Contents