20-foot.
It triggers an alarm if it detects the sound of shattering glass within its 20-foot range, providing reliable security even when no motion detector is used.
https://www.youtube.com/watch?v=mjvMU0GsaaE
How does SimpliSafe glass breakage work?
Detects broken glass.
If a burglar breaks a window to enter your home, our Glassbreak Sensor detects the distinct sound of glass and triggers an alarm. With professional monitoring, it alerts our monitoring centre who will dispatch police if they can visually verify there’s a break-in on the SimpliCam.
Do SimpliSafe glass break sensors work in home mode?
Home Mode arms all your sensors with the exception of Motion Sensors. Yup, that’s right! Your Entry Sensors, Panic Buttons, Glassbreak Sensors, and environmental sensors, like Smoke Detectors and Water Sensors, are all armed. This lets you walk around your house and be protected, without worrying about false alarms.
Are glass break sensors worth it?
Glass break sensors are unique and very useful additions to any home security system. They are cost-effective and can deter a burglar before they do additional damage. Consider getting one if you don’t have these tools alreadya glass break sensor could be the final piece to complete your home security system.
Do glass break sensors work through walls?
The detector mounts in a wall or ceiling and listens to an area approximately 35 feet in all directions. Glass break detectors do not hear through walls or around corners or into a room because the door is open. The more windows you have in a device’s area of protection, the better the value.
What is the range of a glass break sensor?
25-foot
With a 25-foot range, one glass break sensor helps protect a wide area of your home. Whether you’re home or away, our monitoring professionals also get immediate alerts, and can send help quickly. You’ll get instant notifications on your mobile devices if your sensor detects glass breaking.
Can a dog bark set off a glass break sensor?
Glass break sensors are activated by a certain decibel of noise.Some dogs can cause a glass break to send an alarm by barking. If you have more hard surfaces in your home, such as hardwood floors, the noise carries and magnifies, making your sensor more likely to be set-off.
Where does the SimpliSafe glass break sensor go?
They should be installed within twenty feet of the windows you want protected. However, if you have windows with heavy curtains we recommend installing your Glassbreak Sensors 5-10 feet away from your windows.
How many glass break sensors do you need?
Unlike a door or window entry sensor, which triggers when the two parts of the detector move apart, a glass break sensor monitors audio frequencies. In short, it recognizes the sound of breaking glass. One sensor can cover multiple square feet of space, so one glass break detector per room is usually sufficient.
Why did my glass break sensor go off?
Any sound that is similar to the shattering of glass can set off wireless glass break detectors. This could be caused by a window or glass casing being broken. But false sounds can also sometimes activate a sensor. Some glass breaks must also hear the “thud” of an object striking the glass.
Do window sensors work if window is broken?
The main disadvantage of these window sensors is they only work if the window is opened in the way that the sensor is designed to protect against.For homeowners who are at home and confident that the breaking of a window would wake them in the night, these may be sufficient.
Will house alarm go off if window is broken?
Even if they’re home and notice the sound of crashing glass, they’re unlikely to investigate.If you’re concerned about an intruder coming in through a window, your security system needs to have a sensor that will detect broken glass. Ramp up the protection of your home with an updated home security system from Vivint.
What triggers PIR?
The first cause of PIR false alarms is low or unstable voltage at the detector. Test to make sure the voltage at each PIR is above 13VDC and stable. The second cause of false alarms is sudden infrared movement / heat changes in view of the detector.
What is a living room glass break?
A glass break sensor detects when glass is broken and sounds a glass sensor alarm when your security system is armed.If your system is armed, your Glass Break is installed, and someone tries to break a window, the breaking glass will sound your glass sensor alarm, and alert our 24/7 monitoring team.
What does glass break open mean?
If you see the Glass Break Detector showing Open/Close, yes that would indicate an alarm would have occurred if armed. The glass break only opens momentarily, which is why you’ll see Open/Close in one line. Glass Break detectors have a few false alarm triggers which are more common than others.
What is the range of SimpliSafe sensors?
What’s the range of the SimpliSafe system? The base station can reach sensors up to 400 feet away. However, all keypads need to be within 100 feet of the station to work properly.
What is the range of SimpliSafe motion sensors?
They can detect motion within 30 feet, and have a 90 degree field of view. The best place for a Motion Sensor is in a central room, or hallway in your home. The ideal location for a Motion Sensor is in the corner of a room, and 4-5 feet off of the ground for maximum coverage.
How do you test a SimpliSafe glass break sensor?
Glassbreak Sensors:
Press Test Button on the top of the sensor. Clap your hands loudly near your windows. Glassbreak sensors will respond to any loud sound in Test Mode (whereas normally they only respond to breaking glass)
Will ADT sensors work with SimpliSafe?
While there are a few exceptions with third-party hardware, SimpliSafe and ADT devices are not compatible.While neither security system is wholly dependent on Wi-Fi, SimpliSafe is optional, and ADT can use it to communicate with your ADT Command Appthey both rely on entirely different networks.
How do you adjust a glass break sensor?
Go to your glass break detector. To increase sensitivity: Push and hold the test button for 10 seconds. The red LED will be on while the button is pressed, then the green LED will blink two times to indicate the detector has been reprogrammed for single stage operation.
Do SimpliSafe sensors go bad?
Sensors in our latest SimpliSafe system will issue errors when they fail to check in with the Base Station. This issue is generally caused by one of the following: The device was programmed when your system was ordered but was never installed.
Contents