Generally, all 15 or 20-amp, single phase, 125-volt receptacles within 6 ft. of a sink, tub or shower must be GFCI protected. For a sink, the measurement starts from the top inside edge of the bowl of the sink. For a bathtub or shower, the measurement starts at the outside edge of the bathtub or shower stall.
How far does a GFCI have to be from a sink?
For a building (either residential or commercial) to meet all electrical code requirements, Class A GFCI outlets must be installed on all receptacles within 1.5 meters of a sink, tub or shower stall.
How far does a GFCI have to be from water?
6 feet
According to the National Electric Code, any receptacle within 6 feet of a water source needs to be protected with a GFCI.
Where should a GFCI be placed in a kitchen?
In kitchens, all outlets that serve countertop surfaces should be equipped with GFCI outlet protection. That would include any outlets on walls, behind wet areas (sinks, etc.) that have features such as countertop breakfast bars (open counter surfaces above sinks used to sit at on the opposite side).
How far away can a GFCI be located from a tub or shower?
Outlet Receptacles
You should keep the receptacle at least 6 feet away from the edge of a bathtub or shower and at least 1 foot away from sinks.
How far above a sink should an outlet be?
The only thing the NEC requires is that there must be one outlet within 36 inches of the outside edge of the sink, and it must be in the wall adjacent to the basin or countertop. It’s permissible to put a receptacle higher than that, as long as there is another one within the required distance.
How close to a kitchen sink can a electrical socket be?
30cm horizontally
Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity. Sockets should also be easily accessible.
How close can an electrical panel be to a water source?
3 of the IRC specifies that a a dedicated space must exist around the panel and must be kept free of pipes, ducts and any equipment not pertinent to the electrical installation. This space extends from the floor to the ceiling or to a point 6 feet above the top of the panel, whichever is lower.
How close can a switch be to a bathroom sink?
Every bathroom needs at least one electrical outlet. It must be within 3 feet of the sink edge. Across from the sink on an opposite wall is not acceptable, either behind or beside the sink. There must be an electrical receptacle within 3 feet of the two sinks in the bathroom.
Does outlet under sink need to be GFCI?
2 Answers. There are no requirements in National Electrical Code (NEC) that a residential disposal must be GFCI protected. However, there may be requirements in the installation instructions, which would make GFCI protection required. 210.8(A) requires receptacles serving the kitchen countertop to be GFCI protected.
How many GFCI do I need in kitchen?
one GFCI
You only need one GFCI if it’s installed as the first outlet in the circuit and wired properly. Every outlet in the kitchen was required to be protected by GFCI.
Should refrigerators be on GFCI?
Residential Kitchen
In a dwelling unit (residential), GFCI protection is only required for kitchen receptacles that serve the countertop surfaces. There’s no requirement to GFCI protect receptacles that serve a refrigerator. Unless the fridge is plugged into a countertop receptacle.
What is the load side of a GFCI?
The line wires are the incoming power from the breaker box and the load wires are the outgoing power that travels down the circuit to the next outlet.
Can I use 15 amp GFCI in bathroom?
Kitchens and bathrooms should always have 20 amp gfci outlets. However, you must be using number 12 wire for 20 amp gfci or regular outlets If your wiring is number 14 guage then use a 15 amp.If your breaker for the given circuit is only 15 amp, then use a 15 amp gfci.
Should bathroom lights be on GFCI?
As mentioned above, GFCI protection is required for any electrical outlets or switches that are in the area where you could get wet while using your bathroom.
Do I need weather resistant GFCI in bathroom?
Is there a Code requirement? GFCIs are required by the National Electrical Code to be installed in wet or damp locations. This would include kitchens, bathrooms, basements, laundry rooms, garages, porches and any other areas where a water source is present.
How high should bathroom GFCI be?
about 15 to 48 inches
A GFCI outlet, to remain accessible, should sit within about 15 to 48 inches from the floor. If the outlet is located over an obstruction such as a cabinet, the outlet should sit lower to keep it accessible to someone who is disabled or of shorter stature.
What is code for electrical outlet spacing?
The US National Electrical Code, Section 210.52, states that there should be an electrical outlet in every kitchen, bedroom, living room, family room, and any other room that has dedicated living space. They must be positioned at least every twelve feet measured along the floor line.
What is code height for electrical outlets?
Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the
Can you put an electrical outlet under a sink?
Under the sink? The answer is no. This is dangerous. Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity.
What is code for outlets in kitchens?
In kitchens, electrical outlets should be placed no farther than 48 inches apart, so that no point on the countertop is more than 24 inches away from a receptacle. Any countertop 12 inches wide or more should have an outlet on the wall behind the countertop.
Contents