How Far Apart Should Fence Posts Be?

8 to 12 feet.
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

Should fence posts be 6 or 8 feet apart?

Fence posts should be set six to eight feet apart on a 6 foot wood fence. Do not go beyond eight feet or the fence may not be stable enough.

How far apart should 4×4 fence posts be?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

Is 3 feet deep enough for fence posts?

Is 3-Feet Deep Enough For Fence Posts? As mentioned before, the depth you must dig for your fence post should always depend on the size of the fence you are building. As a general rule of thumb one-third of your post should be underground, the other two-thirds above.

How far apart do you put t post?

You should position T-posts no more than 8 feet apart.

What size Post do you use for a 6 foot fence?

You’ll want to dig the holes about 2 1/2 to 3 feet deep for a 6 foot tall fence. You’ll find posts available in both 8 foot and 10 foot lengths.

Is it better to nail or screw fence boards?

Nails are faster than screws to install, meaning less labor for you or your builder (which may translate into lower installation cost).Screws, on the other hand, secure the fence better than nails. They also ensure easier rework should you need to replace a damaged picket.

How far apart should fence posts be chain link?

SPACING FENCE POSTS
As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer’s instructions for spacing, which typically ranges from 4-10′ apart—spacing should not exceed 10′ on-center.

How deep do I need to dig for a fence post?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Can you put dry concrete in a post hole?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

What size t post do I need for a 4 ft fence?

When figuring out what size T-post to use for a four-foot fence, remember that you will drive the posts about two feet into the ground. This means you need posts that are at least 24 inches longer than how tall you want your fence. For a four-foot fence, you should use T-posts that are at least six feet long.

How tall should a fence be for a 6-foot fence?

2 feet
As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.

Does a fence post need to be below the frost line?

All fence posts should be cemented in the ground below frost level. Check your local frost level and dig deeper by at least 6″.

Should wood fence posts be set in concrete?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

How big of a hole do I need for a 4×4 post?

12 inches
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.

How many posts do I need for fence?

Post Placement
Measure the length of your yard. This will be your fence length. The number of posts you will need is your fence length divided by 6 or 8. For example, a yard of 100 feet with 8-foot placement will require around 13 posts.

How deep should a 7 foot fence post be?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.

What size post do I need for an 8 foot fence?

A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8′ high fence, using 4×4 posts. dig the holes 12″ in diameter, to a depth of 2 1/2 – 4′. Of course, that’s assuming you’re setting the posts in concrete.

What size fence post do I need for a 5ft fence?

4in x 4in
Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

Should I leave a gap between fence boards?

Why do you need a space between the pickets and the ground? When wood pickets touch the ground, they absorb moisture, which can lead to swelling or rot. Leaving a space between the pickets and the ground prevents this moisture absorption from occurring, giving you a longer-lasting and nicer-looking fence.