The only thing the NEC requires is that there must be one outlet within 36 inches of the outside edge of the sink, and it must be in the wall adjacent to the basin or countertop. It’s permissible to put a receptacle higher than that, as long as there is another one within the required distance.
How high should outlets be above vanity?
There are no set rules for the height of receptacles on walls or over counters, even in a bathroom. Good practice is to keep them at least 4 inches above a counter top or backsplash and not directly over a sink or under a window.
How close can an outlet be to a sink?
Every bathroom must have at least one electrical outlet. It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.
How far should outlet be from bathroom sink?
Outlet Receptacles
You should keep the receptacle at least 6 feet away from the edge of a bathtub or shower and at least 1 foot away from sinks.
Can an outlet be above a kitchen sink?
The building codes have no restriction on how far away a receptacle outlet must be from a sink. It is not recommended that a receptacle be directly behind a sink because of the possibility of the a cord that is damaged falling into water in the sink but, again, there is no restriction against it.
How far above bathroom counter should outlets be?
A typical bathroom counter is 32 to 36 inches above the floor. A bathroom counter usually has a 4-inch backsplash, where the counter surface turns up the wall. Backsplashes prevent water from running behind a countertop. An electrical outlet receptacle is usually placed 2 to 3 inches above the top of the backsplash.
How close can a switch be to a bathroom sink?
Every bathroom needs at least one electrical outlet. It must be within 3 feet of the sink edge. Across from the sink on an opposite wall is not acceptable, either behind or beside the sink. There must be an electrical receptacle within 3 feet of the two sinks in the bathroom.
How far apart do outlets need to be in the kitchen?
48 inches
In the kitchen, countertop outlets should be no farther than 48 inches away from each other. This spacing is based on the average length of electrical cord found on most small kitchen appliances. The intent is to prevent homeowners from stretching cords too far and creating hazards.
How far from a sink DO YOU NEED A GFCI?
As a rule of thumb, any outlet within six feet of the sink should be a GFCI outlet.
What is the minimum distance an electrical outlet should be from a kitchen sink Nhbc?
300mm
A minimum distance of 300mm, measured horizontally from an electrical accessory and/or consumer unit or distribution board to the edge of the bowl of a sink (see diagram 3) or wash basin opening (see diagram 1) is considered acceptable for the purposes of avoiding splashing from using a sink, or wash basin.
How close can a water line be to an electrical outlet?
According to the National Electric Code, any receptacle within 6 feet of a water source needs to be protected with a GFCI.
What are bathroom vanity heights?
Traditional vanity heights in older homes range from 30 to 32 inches up from the floor. The modern trend is toward higher vanities, up to around 36 inches. For reference, that’s the standard counter height for kitchens.
Can you put an electrical outlet under a sink?
Under the sink? The answer is no. This is dangerous. Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity.
Can a switch be above a sink?
Any receptacle within 6′ (IIRC) must be GFCI protected. Since all of the kitchen countertop receptacles need to be GFCI protected anyway, that shouldn’t be a problem. If it is a bathroom sink counter top, it can not be farther than 36″ from the edge of the sink.
How close can an outlet be to a sink Ontario?
The Canadian Electrical Code requires that a Class A GFCI be provided to protect all receptacles within 1.5 metres of a sink.
Does every outlet in a kitchen need to be GFCI?
In kitchens, all outlets that serve countertop surfaces should be equipped with GFCI outlet protection. That would include any outlets on walls, behind wet areas (sinks, etc.) that have features such as countertop breakfast bars (open counter surfaces above sinks used to sit at on the opposite side).
How far does an outlet have to be from a corner?
The National Electrical Code requires that you have an electrical outlet within 6 feet of the corner of the wall and at least 12 feet from the same wall.
How many outlets do you need on a kitchen countertop?
two
As mentioned in June, a minimum of two small-appliance branch circuits are required in kitchens. [210.52(B)(1)] Kitchen countertop surfaces have the same requirement. At least two small-appliance branch circuits are required to feed the receptacles that serve countertop surfaces in a kitchen.
Do outlets under sinks need to be GFCI?
Only the outlets within 6 feet of the sink (if equipped). If they supply the washer, they do not need to be GFCI’ed. Remember now if the washer receptacle is within 6′ of the edge of the sink. It would indeed require the receptacle to be GFCI protected.
How high should sockets be above kitchen worktop?
The standard height of a worktop from the floor to the worktop surface is 910mm. The general rule is to then set your sockets 150mm above this (measured from the worktop surface to the bottom of the socket). Added together, this means the standard socket height is 1060mm from the floor to the bottom of the socket.
How close can Romex be to water line?
Water and electrical lines should ideally be 12 inches apart, while sewage and electrical lines should be at least 24 inches apart.
Contents