What if my thermostat only has 3 wires?
If you have a heat-only system, you may notice that your thermostat has three wiresR, G, and W. In this scenario, the Power Extender Kit (PEK) is not compatible. There are three options available to create a C wire and make the ecobee compatible.
What color wire goes where on a Honeywell thermostat?
Meaning of Wiring Terminal Letters
W (white) controls the auxiliary heating elements. Y (yellow) controls the compressor on the cooling system. G (green) controls the fan. C (blue or black) provides a return path to the transformer.
Where does the red and white wire go on a Honeywell thermostat?
The white wire is usually connected to the W terminal. The thermostat acts as a switch, like a light switch. The Red to white switch turns on the heat. Red to Green turns on the fan, Red to Yellow turns on the air conditioner.
What is the O B wire?
O, B, O/B: These wires are responsible for switching the changeover valve in a heat pump system. The O wire reverses the valve from heating to cooling, and the B wire switches the valve from cooling to heating. Sometimes it might be a single O/B wire instead of two separate wires.
What color is the C wire on a thermostat?
blue wire
The blue wire on the thermostat is the Common or C wire.
What color is b wire on thermostat?
Blue
Thermostat Wiring Color Code Chart
| Marking | Wire Color Code | Description |
|---|---|---|
| Y2 | Yellow | Secondary cool call relay |
| G | Green | Fan relay |
| O | Orange | Change-over relay to cool relay |
| B | Blue | Change-over relay to heat relay |
Where does blue wire go on Honeywell thermostat?
The Blue or C Wire
C wires or varying colors apply to every thermostat, but blue C wires belong to thermostats attached to a heat pump. Blue wires are for heat pumps. This wire connects to terminal B on your thermostat.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
Why is there a jumper between R and RC?
Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.
What do the different color wires mean on a thermostat?
This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).
What are the wires in a thermostat?
5 Wire Thermostat Wiring (Any HVAC Device Air Conditioners, Heat Pumps, Furnaces, etc.)
- Red wire for power (24V).
- White wire for heating (connected to W or W1 terminal).
- Green wire for fans.
- Blue or yellow wire for cooling (connected to Y).
- Black wire for C or Common wire.
What do the wires mean on a thermostat?
Rh stands for Red-Heat and Rc stands for Red-Cool. If you only have a single red wire the jumper between Rh and Rc are required for some heating and cooling hybrid systems depending on your thermostat. Yellow/Y is the AC compressor. White/W is the Heating element. Green/G runs the fan.
Do I need a jumper from R to RC?
If you have a wire in the R terminal, and no wire in the RC terminal, use the jumper selector switch, the jumper plug, or a small jumper wire to connect the R and Rc terminals.If you have a wire in the R terminal, and another wire (not a jumper) in the RC terminal, you will not need to connect the R and RC terminals.
How do I override a Honeywell programmable thermostat?
Temporary Thermostat Override
On some Honeywell programmable thermostats, it can be as simple as pushing the temperature button arrows up or down to change the temperature temporarily. This override usually lasts until the next scheduled temperature change, when the thermostat will go back to its normal schedule.
Why is there a jumper wire on my thermostat?
Most of your current thermostat’s wires will be connected to your thermostat and go through the wall to connect to your HVAC system. However, some thermostats will have a jumper wire that doesn’t go back through the wall to connect to your system. Instead, a short jumper wire connects two thermostat terminals together.
How do you know if wire is B or O?
Look for connectors that have labels that are the same as your thermostat. For instance, you might find labels like R, W, G, Y, C or O/B. You should find wires attached to these connectors that are the same color as the wires that connect to your thermostat.
What color is ob?
European OB Full Color Code Chart
| Core # | Color |
|---|---|
| 93 | brown/white/red |
| 94 | violet/white/red |
| 95 | pink/white/red |
| 96 | orange/white/red |
What is Y1 and Y2 on a thermostat?
Y/Y1 and Y2. In conventional cooling systems, Y/Y1 controls the first stage of cooling and Y2 controls the second stage, which helps cool down the home faster. In heat pump systems, Y1 controls your compressor, which heats and cools your home.
How do you identify C wire?
It is easy to see if you already have a c-wire connected to your system. Simply remove your current thermostat face from its baseplate and look for the terminal labeled with the letter c. If this terminal has a wire attached to it, you have an active c-wire.
What is a common C wire?
What is a C-Wire? A common wire (C-Wire) provides Wi-Fi thermostats continuous power by connecting it to a heating and cooling system (e.g. furnace). C-Wires are required on most Honeywell Wi-Fi thermostats, with the exception of the Smart Round Thermostat (formerly known as the Lyric Round).
Contents