Slowly turn the key clockwise until the key falls into the groove (the emergency key will be pointing to the 10 to 4 position in relation to a clock when in the groove). Turn the key to the left to unlock the door for a lever, and turn the key to the right to unlock the door for a knob.
How do you use a privacy key?
To unlock a button-type privacy lock, take your tool (small screwdriver, paperclip, or other thin objects) and insert it into the hold as far as you can. Next, apply force by pushing the tool further into the keyway. With enough force, you should feel the locking mechanism click. That’s it, the door is now unlocked!
How do you unlock a Kwikset keypad?
Unlocking from the inside of the door is done manually by turning the thumb turn. Locking and unlocking from the outside can be done automatically by an electric motor. As the last number of a correct code is pressed on the keypad, the electric motor swings into action and retracts the deadbolt.
Which way do you turn a key to unlock a door?
The latch or key locks when turned towards the frame (strike plate) and unlocks when turned away. Whether that is clockwise or counterclockwise depends on whether it is a left or right handed door. A horizontal bar blocks your passageway, hence should mean closed.
How do you use the emergency door key?
Slowly turn the key clockwise until the key falls into the groove (the emergency key will be pointing to the 10 to 4 position in relation to a clock when in the groove). Turn the key to the left to unlock the door for a lever, and turn the key to the right to unlock the door for a knob.
How do you pick a Kwikset lock with a paperclip?
Insert the paperclip with a desired end on the keyhole. Move the paperclip in every direction. While moving the paperclip inside, make sure to exert constant pressure to the lock cylinder. Keep the paperclip moving until the Kwikset lock opens.
How do you open a privacy lock with a bobby pin?
Insert the two points of the bobby pin into the lock. Press the bobby pin forward into the lock depending on the door, simple forward pressure can be enough to open the lock. Picker of Locks says to keep even pressure on the pin as you elevate each lock. Using a second pin that is straightened may help.
Why is my Kwikset lock not unlocking?
Check that the bolt hole is at least 1 deep so the bolt fully extends. Check that the door closes properly so that when the deadbolt is extended, it is going into the bolt hole and not hitting the deadbolt strike or door frame. Check that the mounting screws securing the exterior keypad are not over-tightened.
Why is my Kwikset keypad not working?
If your Kwikset keypad is dead, it may be playing possum.If the keypad is still dead, change the batteries and turn switch 3 to the on position to run a test. Press every key once and make sure it beeps. If some of your buttons still don’t respond, it’s time to call technical support for further testing.
How do you tell if a door is locked from the inside?
One way to check if the lock is engaged is to look at the latch on the side of the door. When the lever is pushed down to open the door, you can see if the latch retracts. If it does, the lock is in an unlocked state. If it doesn’t retract, the lock is in a locked state.
Are Kwikset locks easy to pick?
Even one of Kwikset’s most vocal critics, Marc Weber Tobias (more on him in just a bit), told us that the SmartKey lock is virtually impossible to pick. Other videos criticizing Kwikset point out that the lock can be easily compromised using a specialized bypass tool used by locksmiths.
Can you use any key with Kwikset Smart Key?
The Smartkey locks are only compatible with Kwikset factory-cut keys or locksmith-generated keys carefully cut to factory specs. If you try to set the Smartkey lock to a non-spec key (or even a poorly-made duplicate Kwikset key) you risk messing up the lock.
Contents